Re: [PATCH v5 2/2] phy: rockchip-inno-usb2: add a new driver for Rockchip usb2phy
From: Guenter Roeck
Date: Tue Jun 14 2016 - 09:50:50 EST
On Tue, Jun 14, 2016 at 6:27 AM, Heiko StÃbner <heiko@xxxxxxxxx> wrote:
> Am Montag, 13. Juni 2016, 10:10:10 schrieb Frank Wang:
>> The newer SoCs (rk3366, rk3399) take a different usb-phy IP block
>> than rk3288 and before, and most of phy-related registers are also
>> different from the past, so a new phy driver is required necessarily.
>>
>> Signed-off-by: Frank Wang <frank.wang@xxxxxxxxxxxxxx>
>> ---
>>
>> Changes in v5:
>> - Added 'reg' in the data block to match the different phy-blocks in dt.
>>
>> Changes in v4:
>> - Removed some processes related to 'vbus_host-supply'.
>>
>> Changes in v3:
>> - Resolved the mapping defect between fixed value in driver and the
>> property in devicetree.
>> - Optimized 480m output clock register function.
>> - Code cleanup.
>>
>> Changes in v2:
>> - Changed vbus_host operation from gpio to regulator in *_probe.
>> - Improved the fault treatment relate to 480m clock register.
>> - Cleaned up some meaningless codes in *_clk480m_disable.
>> - made more clear the comment of *_sm_work.
>>
>> drivers/phy/Kconfig | 7 +
>> drivers/phy/Makefile | 1 +
>> drivers/phy/phy-rockchip-inno-usb2.c | 645
>> ++++++++++++++++++++++++++++++++++ 3 files changed, 653 insertions(+)
>> create mode 100644 drivers/phy/phy-rockchip-inno-usb2.c
>>
>> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
>> index b869b98..29ef15c 100644
>> --- a/drivers/phy/Kconfig
>> +++ b/drivers/phy/Kconfig
>> @@ -347,6 +347,13 @@ config PHY_ROCKCHIP_USB
>> help
>> Enable this to support the Rockchip USB 2.0 PHY.
>>
>> +config PHY_ROCKCHIP_INNO_USB2
>> + tristate "Rockchip INNO USB2PHY Driver"
>> + depends on ARCH_ROCKCHIP && OF
>> + select GENERIC_PHY
>> + help
>> + Support for Rockchip USB2.0 PHY with Innosilicon IP block.
>> +
>> config PHY_ROCKCHIP_EMMC
>> tristate "Rockchip EMMC PHY Driver"
>> depends on ARCH_ROCKCHIP && OF
>> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
>> index 9c3e73c..4963fbc 100644
>> --- a/drivers/phy/Makefile
>> +++ b/drivers/phy/Makefile
>> @@ -38,6 +38,7 @@ phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) +=
>> phy-s5pv210-usb2.o obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o
>> obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
>> obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
>> +obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2) += phy-rockchip-inno-usb2.o
>> obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o
>> obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o
>> obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
>> diff --git a/drivers/phy/phy-rockchip-inno-usb2.c
>> b/drivers/phy/phy-rockchip-inno-usb2.c new file mode 100644
>> index 0000000..fc599c7
>> --- /dev/null
>> +++ b/drivers/phy/phy-rockchip-inno-usb2.c
>> @@ -0,0 +1,645 @@
>> +/*
>> + * Rockchip USB2.0 PHY with Innosilicon IP block driver
>> + *
>> + * Copyright (C) 2016 Fuzhou Rockchip Electronics Co., Ltd
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/clk-provider.h>
>> +#include <linux/delay.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/io.h>
>> +#include <linux/gpio/consumer.h>
>> +#include <linux/jiffies.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/mutex.h>
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
>> +#include <linux/of_irq.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/phy/phy.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/regmap.h>
>> +#include <linux/mfd/syscon.h>
>> +
>> +#define BIT_WRITEABLE_SHIFT 16
>> +#define SCHEDULE_DELAY (60 * HZ)
>> +
>> +enum rockchip_usb2phy_port_id {
>> + USB2PHY_PORT_OTG,
>> + USB2PHY_PORT_HOST,
>> + USB2PHY_NUM_PORTS,
>> +};
>> +
>> +enum rockchip_usb2phy_host_state {
>> + PHY_STATE_HS_ONLINE = 0,
>> + PHY_STATE_DISCONNECT = 1,
>> + PHY_STATE_HS_CONNECT = 2,
>> + PHY_STATE_FS_CONNECT = 4,
>> +};
>> +
>> +struct usb2phy_reg {
>> + unsigned int offset;
>> + unsigned int bitend;
>> + unsigned int bitstart;
>> + unsigned int disable;
>> + unsigned int enable;
>> +};
>> +
>> +/**
>> + * struct rockchip_usb2phy_port_cfg: usb-phy port configuration.
>> + * @phy_sus: phy suspend register.
>> + * @ls_det_en: linestate detection enable register.
>> + * @ls_det_st: linestate detection state register.
>> + * @ls_det_clr: linestate detection clear register.
>> + * @utmi_ls: utmi linestate state register.
>> + * @utmi_hstdet: utmi host disconnect register.
>> + */
>> +struct rockchip_usb2phy_port_cfg {
>> + struct usb2phy_reg phy_sus;
>> + struct usb2phy_reg ls_det_en;
>> + struct usb2phy_reg ls_det_st;
>> + struct usb2phy_reg ls_det_clr;
>> + struct usb2phy_reg utmi_ls;
>> + struct usb2phy_reg utmi_hstdet;
>> +};
>> +
>> +/**
>> + * struct rockchip_usb2phy_cfg: usb-phy configuration.
>> + * @reg: the address offset of grf for usb-phy config.
>> + * @num_ports: specify how many ports that the phy has.
>> + * @clkout_ctl: keep on/turn off output clk of phy.
>> + */
>> +struct rockchip_usb2phy_cfg {
>> + unsigned int reg;
>> + unsigned int num_ports;
>> + struct usb2phy_reg clkout_ctl;
>> + const struct rockchip_usb2phy_port_cfg port_cfgs[USB2PHY_NUM_PORTS];
>> +};
>> +
>> +/**
>> + * struct rockchip_usb2phy_port: usb-phy port data.
>> + * @port_id: flag for otg port or host port.
>> + * @suspended: phy suspended flag.
>> + * @ls_irq: IRQ number assigned for linestate detection.
>> + * @mutex: for register updating in sm_work.
>> + * @sm_work: OTG state machine work.
>> + * @phy_cfg: port register configuration, assigned by driver data.
>> + */
>> +struct rockchip_usb2phy_port {
>> + struct phy *phy;
>> + unsigned int port_id;
>> + bool suspended;
>> + int ls_irq;
>> + struct mutex mutex;
>> + struct delayed_work sm_work;
>> + const struct rockchip_usb2phy_port_cfg *port_cfg;
>> +};
>> +
>> +/**
>> + * struct rockchip_usb2phy: usb2.0 phy driver data.
>> + * @grf: General Register Files regmap.
>> + * @clk: clock struct of phy input clk.
>> + * @clk480m: clock struct of phy output clk.
>> + * @clk_hw: clock struct of phy output clk management.
>> + * @phy_cfg: phy register configuration, assigned by driver data.
>> + * @ports: phy port instance.
>> + */
>> +struct rockchip_usb2phy {
>> + struct device *dev;
>> + struct regmap *grf;
>> + struct clk *clk;
>> + struct clk *clk480m;
>> + struct clk_hw clk480m_hw;
>> + const struct rockchip_usb2phy_cfg *phy_cfg;
>> + struct rockchip_usb2phy_port ports[USB2PHY_NUM_PORTS];
>> +};
>> +
>> +static inline int property_enable(struct rockchip_usb2phy *rphy,
>> + const struct usb2phy_reg *reg, bool en)
>> +{
>> + unsigned int val, mask, tmp;
>> +
>> + tmp = en ? reg->enable : reg->disable;
>> + mask = GENMASK(reg->bitend, reg->bitstart);
>> + val = (tmp << reg->bitstart) | (mask << BIT_WRITEABLE_SHIFT);
>> +
>> + return regmap_write(rphy->grf, reg->offset, val);
>> +}
>> +
>> +static inline bool property_enabled(struct rockchip_usb2phy *rphy,
>> + const struct usb2phy_reg *reg)
>> +{
>> + int ret;
>> + unsigned int tmp, orig;
>> + unsigned int mask = GENMASK(reg->bitend, reg->bitstart);
>> +
>> + ret = regmap_read(rphy->grf, reg->offset, &orig);
>> + if (ret)
>> + return false;
>> +
>> + tmp = (orig & mask) >> reg->bitstart;
>> + return tmp == reg->enable;
>> +}
>> +
>> +static int rockchip_usb2phy_clk480m_enable(struct clk_hw *hw)
>> +{
>> + struct rockchip_usb2phy *rphy =
>> + container_of(hw, struct rockchip_usb2phy, clk480m_hw);
>> + int ret;
>> +
>> + /* turn on 480m clk output if it is off */
>> + if (!property_enabled(rphy, &rphy->phy_cfg->clkout_ctl)) {
>> + ret = property_enable(rphy, &rphy->phy_cfg->clkout_ctl, true);
>> + if (ret)
>> + return ret;
>> +
>> + /* waitting for the clk become stable */
>> + mdelay(1);
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static void rockchip_usb2phy_clk480m_disable(struct clk_hw *hw)
>> +{
>> + struct rockchip_usb2phy *rphy =
>> + container_of(hw, struct rockchip_usb2phy, clk480m_hw);
>> +
>> + /* turn off 480m clk output */
>> + property_enable(rphy, &rphy->phy_cfg->clkout_ctl, false);
>> +}
>> +
>> +static int rockchip_usb2phy_clk480m_enabled(struct clk_hw *hw)
>> +{
>> + struct rockchip_usb2phy *rphy =
>> + container_of(hw, struct rockchip_usb2phy, clk480m_hw);
>> +
>> + return property_enabled(rphy, &rphy->phy_cfg->clkout_ctl);
>> +}
>> +
>> +static unsigned long
>> +rockchip_usb2phy_clk480m_recalc_rate(struct clk_hw *hw,
>> + unsigned long parent_rate)
>> +{
>> + return 480000000;
>> +}
>> +
>> +static const struct clk_ops rockchip_usb2phy_clkout_ops = {
>> + .enable = rockchip_usb2phy_clk480m_enable,
>> + .disable = rockchip_usb2phy_clk480m_disable,
>> + .is_enabled = rockchip_usb2phy_clk480m_enabled,
>> + .recalc_rate = rockchip_usb2phy_clk480m_recalc_rate,
>> +};
>> +
>> +static void rockchip_usb2phy_clk480m_unregister(void *data)
>> +{
>> + struct rockchip_usb2phy *rphy = data;
>> +
>> + of_clk_del_provider(rphy->dev->of_node);
>> + clk_unregister(rphy->clk480m);
>> +
>> + if (rphy->clk)
>> + clk_put(rphy->clk);
>> +}
>> +
>> +static int
>> +rockchip_usb2phy_clk480m_register(struct rockchip_usb2phy *rphy)
>> +{
>> + struct device_node *node = rphy->dev->of_node;
>> + struct clk_init_data init;
>> + const char *clk_name;
>> + int ret;
>> +
>> + init.flags = 0;
>> + init.name = "clk_usbphy_480m";
>> + init.ops = &rockchip_usb2phy_clkout_ops;
>> +
>> + /* optional override of the clockname */
>> + of_property_read_string(node, "clock-output-names", &init.name);
>> +
>> + rphy->clk = of_clk_get_by_name(node, "phyclk");
>> + if (IS_ERR(rphy->clk)) {
>> + rphy->clk = NULL;
>> + init.parent_names = NULL;
>> + init.num_parents = 0;
>> + } else {
>> + clk_name = __clk_get_name(rphy->clk);
>> + init.parent_names = &clk_name;
>> + init.num_parents = 1;
>> + }
>> +
>> + rphy->clk480m_hw.init = &init;
>> +
>> + /* register the clock */
>> + rphy->clk480m = clk_register(rphy->dev, &rphy->clk480m_hw);
>> + if (IS_ERR(rphy->clk480m)) {
>> + ret = PTR_ERR(rphy->clk480m);
>> + goto err_register;
>> + }
>> +
>> + ret = of_clk_add_provider(node, of_clk_src_simple_get, rphy->clk480m);
>> + if (ret < 0)
>> + goto err_clk_provider;
>> +
>> + ret = devm_add_action(rphy->dev, rockchip_usb2phy_clk480m_unregister,
>> + rphy);
>> + if (ret < 0)
>> + goto err_unreg_action;
>> +
>> + return 0;
>> +
>> +err_unreg_action:
>> + of_clk_del_provider(node);
>> +err_clk_provider:
>> + clk_unregister(rphy->clk480m);
>> +err_register:
>> + if (rphy->clk)
>> + clk_put(rphy->clk);
>> + return ret;
>> +}
>> +
>> +static int rockchip_usb2phy_init(struct phy *phy)
>> +{
>> + struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
>> + struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent);
>> + int ret;
>> +
>
> if (!rport->port_cfg)
> return 0;
>
> Otherwise the currently empty otg-port will cause null-pointer dereferences
> when it gets assigned in the devicetree already.
>
Not really, at least not here - that port should not have port_id set
to USB2PHY_PORT_HOST.
Does it even make sense to instantiate the otg port ? Is it going to
do anything without port configuration ?
>
>> + if (rport->port_id == USB2PHY_PORT_HOST) {
>> + /* clear linestate and enable linestate detect irq */
>> + mutex_lock(&rport->mutex);
>> +
>> + ret = property_enable(rphy, &rport->port_cfg->ls_det_clr, true);
>> + if (ret) {
>> + mutex_unlock(&rport->mutex);
>> + return ret;
>> + }
>> +
>> + ret = property_enable(rphy, &rport->port_cfg->ls_det_en, true);
>> + if (ret) {
>> + mutex_unlock(&rport->mutex);
>> + return ret;
>> + }
>> +
>> + mutex_unlock(&rport->mutex);
>> + schedule_delayed_work(&rport->sm_work, SCHEDULE_DELAY);
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int rockchip_usb2phy_resume(struct phy *phy)
>> +{
>> + struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
>> + struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent);
>> + int ret;
>> +
>> + dev_dbg(&rport->phy->dev, "port resume\n");
>
> if (!rport->port_cfg)
> return 0;
>
>> +
>> + ret = clk_prepare_enable(rphy->clk480m);
>> + if (ret)
>> + return ret;
>> +
>> + ret = property_enable(rphy, &rport->port_cfg->phy_sus, false);
>> + if (ret)
>> + return ret;
>> +
>> + rport->suspended = false;
>> + return 0;
>> +}
>> +
>> +static int rockchip_usb2phy_suspend(struct phy *phy)
>> +{
>> + struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
>> + struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent);
>> + int ret;
>> +
>
> if (!rport->port_cfg)
> return 0;
>
>> + dev_dbg(&rport->phy->dev, "port suspend\n");
>> +
>> + ret = property_enable(rphy, &rport->port_cfg->phy_sus, true);
>> + if (ret)
>> + return ret;
>> +
>> + rport->suspended = true;
>> + clk_disable_unprepare(rphy->clk480m);
>> + return 0;
>> +}
>> +
>> +static int rockchip_usb2phy_exit(struct phy *phy)
>> +{
>> + struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
>> +
>
> if (!rport->port_cfg)
> return 0;
>
No access to port_cfg here ?
>> + if (rport->port_id == USB2PHY_PORT_HOST)
>> + cancel_delayed_work_sync(&rport->sm_work);
>> +
>
> you will also need to resume the port here, if it is suspended at this point,
> as phy_power_off gets called after phy_exit and would probably produce clk
> enable/disable mismatches otherwise.
>
>
>> + return 0;
>> +}
>> +
>> +static const struct phy_ops rockchip_usb2phy_ops = {
>> + .init = rockchip_usb2phy_init,
>> + .exit = rockchip_usb2phy_exit,
>> + .power_on = rockchip_usb2phy_resume,
>> + .power_off = rockchip_usb2phy_suspend,
>> + .owner = THIS_MODULE,
>> +};
>> +
>> +/*
>> + * The function manage host-phy port state and suspend/resume phy port
>> + * to save power.
>> + *
>> + * we rely on utmi_linestate and utmi_hostdisconnect to identify whether
>> + * FS/HS is disconnect or not. Besides, we do not need care it is FS
>> + * disconnected or HS disconnected, actually, we just only need get the
>> + * device is disconnected at last through rearm the delayed work,
>> + * to suspend the phy port in _PHY_STATE_DISCONNECT_ case.
>> + *
>> + * NOTE: It may invoke *phy_suspend or *phy_resume which will invoke some
>> + * clk related APIs, so do not invoke it from interrupt context directly.
>> + */
>> +static void rockchip_usb2phy_sm_work(struct work_struct *work)
>> +{
>> + struct rockchip_usb2phy_port *rport =
>> + container_of(work, struct rockchip_usb2phy_port, sm_work.work);
>> + struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
>> + unsigned int sh = rport->port_cfg->utmi_hstdet.bitend -
>> + rport->port_cfg->utmi_hstdet.bitstart + 1;
>> + unsigned int ul, uhd, state;
>> + unsigned int ul_mask, uhd_mask;
>> + int ret;
>> +
>> + mutex_lock(&rport->mutex);
>> +
>> + ret = regmap_read(rphy->grf, rport->port_cfg->utmi_ls.offset, &ul);
>> + if (ret < 0)
>> + goto next_schedule;
>> +
>> + ret = regmap_read(rphy->grf, rport->port_cfg->utmi_hstdet.offset,
>> + &uhd);
>> + if (ret < 0)
>> + goto next_schedule;
>> +
>> + uhd_mask = GENMASK(rport->port_cfg->utmi_hstdet.bitend,
>> + rport->port_cfg->utmi_hstdet.bitstart);
>> + ul_mask = GENMASK(rport->port_cfg->utmi_ls.bitend,
>> + rport->port_cfg->utmi_ls.bitstart);
>> +
>> + /* stitch on utmi_ls and utmi_hstdet as phy state */
>> + state = ((uhd & uhd_mask) >> rport->port_cfg->utmi_hstdet.bitstart) |
>> + (((ul & ul_mask) >> rport->port_cfg->utmi_ls.bitstart) << sh);
>> +
>> + switch (state) {
>> + case PHY_STATE_HS_ONLINE:
>> + dev_dbg(&rport->phy->dev, "HS online\n");
>> + break;
>> + case PHY_STATE_FS_CONNECT:
>> + /*
>> + * For FS device, the online state share with connect state
>> + * from utmi_ls and utmi_hstdet register, so we distinguish
>> + * them via suspended flag.
>> + */
>> + if (!rport->suspended) {
>> + dev_dbg(&rport->phy->dev, "FS online\n");
>> + break;
>> + }
>> + /* fall through */
>> + case PHY_STATE_HS_CONNECT:
>> + if (rport->suspended) {
>> + dev_dbg(&rport->phy->dev, "HS/FS connected\n");
>> + rockchip_usb2phy_resume(rport->phy);
>> + rport->suspended = false;
>> + }
>> + break;
>> + case PHY_STATE_DISCONNECT:
>> + if (!rport->suspended) {
>> + dev_dbg(&rport->phy->dev, "HS/FS disconnected\n");
>> + rockchip_usb2phy_suspend(rport->phy);
>> + rport->suspended = true;
>> + }
>> +
>> + /*
>> + * activate the linestate detection to get the next device
>> + * plug-in irq.
>> + */
>> + property_enable(rphy, &rport->port_cfg->ls_det_clr, true);
>> + property_enable(rphy, &rport->port_cfg->ls_det_en, true);
>> +
>> + /*
>> + * we don't need to rearm the delayed work when the phy port
>> + * is suspended.
>> + */
>> + mutex_unlock(&rport->mutex);
>> + return;
>> + default:
>> + dev_dbg(&rport->phy->dev, "unknown phy state\n");
>> + break;
>> + }
>> +
>> +next_schedule:
>> + mutex_unlock(&rport->mutex);
>> + schedule_delayed_work(&rport->sm_work, SCHEDULE_DELAY);
>> +}
>> +
>> +static irqreturn_t rockchip_usb2phy_linestate_irq(int irq, void *data)
>> +{
>> + struct rockchip_usb2phy_port *rport = data;
>> + struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
>> +
>> + if (!property_enabled(rphy, &rport->port_cfg->ls_det_st))
>> + return IRQ_NONE;
>> +
>> + mutex_lock(&rport->mutex);
>> +
>> + /* disable linestate detect irq and clear its status */
>> + property_enable(rphy, &rport->port_cfg->ls_det_en, false);
>> + property_enable(rphy, &rport->port_cfg->ls_det_clr, true);
>> +
>> + mutex_unlock(&rport->mutex);
>> +
>> + /*
>> + * In this case for host phy port, a new device is plugged in,
>> + * meanwhile, if the phy port is suspended, we need rearm the work to
>> + * resume it and mange its states; otherwise, we do nothing about that.
>> + */
>> + if (rport->suspended && rport->port_id == USB2PHY_PORT_HOST)
>> + rockchip_usb2phy_sm_work(&rport->sm_work.work);
>> +
>> + return IRQ_HANDLED;
>> +}
>> +
>> +static int rockchip_usb2phy_host_port_init(struct rockchip_usb2phy *rphy,
>> + struct rockchip_usb2phy_port *rport,
>> + struct device_node *child_np)
>> +{
>> + int ret;
>> +
>> + rport->port_id = USB2PHY_PORT_HOST;
>> + rport->port_cfg = &rphy->phy_cfg->port_cfgs[USB2PHY_PORT_HOST];
>> +
>> + mutex_init(&rport->mutex);
>> + INIT_DELAYED_WORK(&rport->sm_work, rockchip_usb2phy_sm_work);
>> +
>> + rport->ls_irq = of_irq_get_byname(child_np, "linestate");
>> + if (rport->ls_irq < 0) {
>> + dev_err(rphy->dev, "no linestate irq provided\n");
>> + return rport->ls_irq;
>> + }
>> +
>> + ret = devm_request_threaded_irq(rphy->dev, rport->ls_irq, NULL,
>> + rockchip_usb2phy_linestate_irq,
>> + IRQF_ONESHOT,
>> + "rockchip_usb2phy", rport);
>> + if (ret) {
>> + dev_err(rphy->dev, "failed to request irq handle\n");
>> + return ret;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int rockchip_usb2phy_probe(struct platform_device *pdev)
>> +{
>> + struct device *dev = &pdev->dev;
>> + struct device_node *np = dev->of_node;
>> + struct device_node *child_np;
>> + struct phy_provider *provider;
>> + struct rockchip_usb2phy *rphy;
>> + const struct rockchip_usb2phy_cfg *phy_cfgs;
>> + const struct of_device_id *match;
>> + unsigned int reg;
>> + int index, ret;
>> +
>> + rphy = devm_kzalloc(dev, sizeof(*rphy), GFP_KERNEL);
>> + if (!rphy)
>> + return -ENOMEM;
>> +
>> + match = of_match_device(dev->driver->of_match_table, dev);
>> + if (!match || !match->data) {
>> + dev_err(dev, "phy configs are not assigned!\n");
>> + return -EINVAL;
>> + }
>> +
>> + if (!dev->parent || !dev->parent->of_node)
>> + return -EINVAL;
>> +
>> + rphy->grf = syscon_node_to_regmap(dev->parent->of_node);
>> + if (IS_ERR(rphy->grf))
>> + return PTR_ERR(rphy->grf);
>> +
>> + if (of_property_read_u32(np, "reg", ®)) {
>> + dev_err(dev, "the reg property is not assigned in %s node\n",
>> + np->name);
>> + return -EINVAL;
>> + }
>> +
>> + rphy->dev = dev;
>> + phy_cfgs = match->data;
>> + platform_set_drvdata(pdev, rphy);
>> +
>> + /* find out a proper config which can be matched with dt. */
>> + index = 0;
>> + while (phy_cfgs[index].reg) {
>> + if (phy_cfgs[index].reg == reg) {
>> + rphy->phy_cfg = &phy_cfgs[index];
>> + break;
>> + }
>> +
>> + ++index;
>> + }
>> +
>> + if (!rphy->phy_cfg) {
>> + dev_err(dev, "no phy-config can be matched with %s node\n",
>> + np->name);
>> + return -EINVAL;
>> + }
>> +
>> + ret = rockchip_usb2phy_clk480m_register(rphy);
>> + if (ret) {
>> + dev_err(dev, "failed to register 480m output clock\n");
>> + return ret;
>> + }
>> +
>> + index = 0;
>> + for_each_available_child_of_node(np, child_np) {
>> + struct rockchip_usb2phy_port *rport = &rphy->ports[index];
>> + struct phy *phy;
>> +
>> + phy = devm_phy_create(dev, child_np, &rockchip_usb2phy_ops);
>> + if (IS_ERR(phy)) {
>> + dev_err(dev, "failed to create phy\n");
>> + ret = PTR_ERR(phy);
>> + goto put_child;
>> + }
>> +
>> + rport->phy = phy;
>
> phy_set_drvdata(rport->phy, rport);
>
>> +
>> + /* initialize otg/host port separately */
>> + if (!of_node_cmp(child_np->name, "host-port")) {
>> + ret = rockchip_usb2phy_host_port_init(rphy, rport,
>> + child_np);
>> + if (ret)
>> + goto put_child;
>> + }
>> +
>> + phy_set_drvdata(rport->phy, rport);
>
> move this to the location above to prevent null-pointer dereferences with
> devices plugged in on boot.
>
> I've tested this a bit on a rk3036 (which is lacking the disconnect-detection
> it seems), so in general (apart from the stuff mentioned above) this looks
> nice now. So with the stuff above fixed:
>
> Reviewed-by: Heiko Stuebner <heiko@xxxxxxxxx>
> Tested-by: Heiko Stuebner <heiko@xxxxxxxxx>
>
>
> Heiko