[PATCH v5 0/2] Add a new Rockchip usb2 phy driver

From: Frank Wang
Date: Sun Jun 12 2016 - 22:11:22 EST


The newer SoCs (rk3366, rk3399) of Rock-chip take a different usb-phy
IP block than rk3288 and before, and most of phy-related registers are
also different from the past, so a new phy driver is required necessarily.

These series patches add phy-rockchip-inno-usb2.c and the corresponding
documentation.

Changes in v5:
- Added 'reg' property both in devicetree bindings and driver to match the different phy-blocks.

Changes in v4:
- Used 'phy-supply' instead of 'vbus_*-supply'.

Changes in v3:
- Supplemented some hardware-description into the devicetree bindings.
- Resolved the mapping defect between fixed value in driver and the property
in devicetree.
- Code cleanup.

Changes in v2:
- Specified more hardware-description into the devicetree bindings.
- Optimized some process of driver.

Frank Wang (2):
Documentation: bindings: add DT documentation for Rockchip USB2PHY
phy: rockchip-inno-usb2: add a new driver for Rockchip usb2phy

.../bindings/phy/phy-rockchip-inno-usb2.txt | 64 ++
drivers/phy/Kconfig | 7 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-rockchip-inno-usb2.c | 645 ++++++++++++++++++++
4 files changed, 717 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
create mode 100644 drivers/phy/phy-rockchip-inno-usb2.c

--
1.7.9.5