[PATCH] usb: dwc3: fix runtime PM in error path

From: Roger Quadros
Date: Fri Jun 10 2016 - 04:54:51 EST


If there is a failure after pm_runtime_enable/get_sync()
we need to call pm_runtime_disable/put_sync().

Otherwise it will lead to an unbalanced pm_runtime_enable() on the
subsequent probe if the earlier probe bailed out due to -EPROBE_DEFER.

Signed-off-by: Roger Quadros <rogerq@xxxxxx>
---
drivers/usb/dwc3/core.c | 19 ++++++++++++-------
1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 5bf38f8..222d2c9 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1419,7 +1419,7 @@ static int dwc3_probe(struct platform_device *pdev)
if (ret) {
dev_err(dwc->dev, "failed to allocate event buffers\n");
ret = -ENOMEM;
- goto err0;
+ goto err1;
}

if (IS_ENABLED(CONFIG_USB_DWC3_HOST) &&
@@ -1436,12 +1436,12 @@ static int dwc3_probe(struct platform_device *pdev)

ret = dwc3_alloc_scratch_buffers(dwc);
if (ret)
- goto err1;
+ goto err2;

ret = dwc3_core_init(dwc);
if (ret) {
dev_err(dev, "failed to initialize core\n");
- goto err2;
+ goto err3;
}

/* Check the maximum_speed parameter */
@@ -1473,23 +1473,28 @@ static int dwc3_probe(struct platform_device *pdev)

ret = dwc3_core_init_mode(dwc);
if (ret)
- goto err3;
+ goto err4;

dwc3_debugfs_init(dwc);
pm_runtime_put(dev);

return 0;

-err3:
+err4:
dwc3_event_buffers_cleanup(dwc);

-err2:
+err3:
dwc3_free_scratch_buffers(dwc);

-err1:
+err2:
dwc3_free_event_buffers(dwc);
dwc3_ulpi_exit(dwc);

+err1:
+ pm_runtime_allow(&pdev->dev);
+ pm_runtime_put_sync(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+
err0:
/*
* restore res->start back to its original value so that, in case the
--
2.7.4