[PATCH v4 2/7] leds: documentation: 'ide-disk' to 'disk-activity'

From: Stephan Linz
Date: Fri Jun 10 2016 - 02:01:26 EST


Cc: Joseph Jezak <josejx@xxxxxxxxxx>
Cc: JÃrg Sommer <joerg@xxxxxxxxxxxx>
Signed-off-by: Stephan Linz <linz@xxxxxxxxxx>
---
Documentation/devicetree/bindings/leds/common.txt | 3 ++-
Documentation/devicetree/bindings/leds/leds-gpio.txt | 4 ++--
Documentation/laptops/asus-laptop.txt | 2 +-
Documentation/leds/leds-class.txt | 2 +-
4 files changed, 6 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
index af10678..4c08a01 100644
--- a/Documentation/devicetree/bindings/leds/common.txt
+++ b/Documentation/devicetree/bindings/leds/common.txt
@@ -26,7 +26,8 @@ Optional properties for child nodes:
"default-on" - LED will turn on (but for leds-gpio see "default-state"
property in Documentation/devicetree/bindings/gpio/led.txt)
"heartbeat" - LED "double" flashes at a load average based rate
- "ide-disk" - LED indicates disk activity
+ "disk-activity" - LED indicates disk activity, the old name "ide-disk" is
+ still valid for backward compatibility
"timer" - LED flashes at a fixed, configurable rate

- led-max-microamp : Maximum LED supply current in microamperes. This property
diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.txt b/Documentation/devicetree/bindings/leds/leds-gpio.txt
index cbbeb18..5b1b43a 100644
--- a/Documentation/devicetree/bindings/leds/leds-gpio.txt
+++ b/Documentation/devicetree/bindings/leds/leds-gpio.txt
@@ -33,9 +33,9 @@ Examples:
leds {
compatible = "gpio-leds";
hdd {
- label = "IDE Activity";
+ label = "Disk Activity";
gpios = <&mcu_pio 0 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "ide-disk";
+ linux,default-trigger = "disk-activity";
};

fault {
diff --git a/Documentation/laptops/asus-laptop.txt b/Documentation/laptops/asus-laptop.txt
index 79a1bc6..5f28587 100644
--- a/Documentation/laptops/asus-laptop.txt
+++ b/Documentation/laptops/asus-laptop.txt
@@ -72,7 +72,7 @@ LEDs
echo 1 > /sys/class/leds/asus::mail/brightness
will switch the mail LED on.
You can also know if they are on/off by reading their content and use
- kernel triggers like ide-disk or heartbeat.
+ kernel triggers like disk-activity or heartbeat.

Backlight
---------
diff --git a/Documentation/leds/leds-class.txt b/Documentation/leds/leds-class.txt
index d406d98..44c1bcf 100644
--- a/Documentation/leds/leds-class.txt
+++ b/Documentation/leds/leds-class.txt
@@ -11,7 +11,7 @@ brightness support so will just be turned on for non-zero brightness settings.
The class also introduces the optional concept of an LED trigger. A trigger
is a kernel based source of led events. Triggers can either be simple or
complex. A simple trigger isn't configurable and is designed to slot into
-existing subsystems with minimal additional code. Examples are the ide-disk,
+existing subsystems with minimal additional code. Examples are the disk-activity,
nand-disk and sharpsl-charge triggers. With led triggers disabled, the code
optimises away.

--
2.8.4