Re: [RFC][PATCH 2/5] hi655x-pmic: Make hi655x pmic logic probe child nodes in the dt

From: John Stultz
Date: Wed Jun 08 2016 - 13:22:29 EST


On Wed, Jun 8, 2016 at 7:31 AM, Lee Jones <lee.jones@xxxxxxxxxx> wrote:
>
> Please use full buffer width. Wrapping at 50 chars is not necessary.

But then how would you be able to review patches on your phone?! :)


>> --- a/drivers/mfd/hi655x-pmic.c
>> +++ b/drivers/mfd/hi655x-pmic.c
>> @@ -39,6 +39,11 @@ static const struct regmap_irq hi655x_irqs[] = {
>> { .reg_offset = 0, .mask = RESERVE_INT },
>> };
>>
>> +static const struct of_device_id of_hi655x_pmic_child_match_tbl[] = {
>> + { .compatible = "hisilicon,hi6552-powerkey", },
>> + { /* end */ }
>> +};
>> +
>> static const struct regmap_irq_chip hi655x_irq_chip = {
>> .name = "hi655x-pmic",
>> .irqs = hi655x_irqs,
>> @@ -122,6 +127,9 @@ static int hi655x_pmic_probe(struct platform_device *pdev)
>>
>> platform_set_drvdata(pdev, pmic);
>>
>> + /* populate sub nodes */
>> + of_platform_populate(np, of_hi655x_pmic_child_match_tbl, NULL, dev);
>> +
>
> Oh, holey poop, no!
>
> Please don't mix DT and MFD registration like this.
>
> Drivers should contain either of_platform_populate() or
> mfd_add_devices(), but never both.
>
>> ret = mfd_add_devices(dev, PLATFORM_DEVID_AUTO, hi655x_pmic_devs,
>> ARRAY_SIZE(hi655x_pmic_devs), NULL, 0, NULL);
>> if (ret) {


So apologies for my ignorance here. I'm not quite sure I see what the
right thing to do. I tried adding a "hi65xx-powerkey" entry in the
hi655x_pmic_devs, but then mfd_add_devices doesn't seem to provide any
of the irq info from the DT.

The only way I can think to make it work w/o calling to populate
sub-nodes is to pull the powerkey subnode out of the pmic node. It
seems to work, but I'm not sure if it properly describes the hardware
then. Sorry again for being a bit clueless here.

Thanks for the review!
-john