[PATCH v2 6/6] drm/panel: simple: Add support for Sharp LQ123P1JX31 2400x1600 panel

From: Yakir Yang
Date: Wed Jun 08 2016 - 07:53:09 EST


The Sharp LQ123P1JX31 is an 12.3", 2400x1600 TFT-LCD panel connected
using eDP interfaces.

Signed-off-by: Yakir Yang <ykk@xxxxxxxxxxxxxx>
---
Changes in v2:
- Add detail timing of Sharp LQ123P1JX31 panel in v2

drivers/gpu/drm/panel/panel-simple.c | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 067a5c4..38b6660 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1314,6 +1314,29 @@ static const struct panel_desc samsung_ltn140at29_301 = {
},
};

+static const struct drm_display_mode sharp_lq123p1jx31_mode = {
+ .clock = 252750,
+ .hdisplay = 2400,
+ .hsync_start = 2400 + 48,
+ .hsync_end = 2400 + 48 + 32,
+ .htotal = 2400 + 48 + 32 + 80,
+ .vdisplay = 1600,
+ .vsync_start = 1600 + 3,
+ .vsync_end = 1600 + 3 + 10,
+ .vtotal = 1600 + 3 + 10 + 33,
+ .vrefresh = 60,
+ .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
+};
+
+static const struct panel_desc sharp_lq123p1jx31 = {
+ .modes = &sharp_lq123p1jx31_mode,
+ .num_modes = 1,
+ .size = {
+ .width = 2400,
+ .height = 1600,
+ },
+};
+
static const struct drm_display_mode shelly_sca07010_bfn_lnn_mode = {
.clock = 33300,
.hdisplay = 800,
@@ -1537,6 +1560,9 @@ static const struct of_device_id platform_of_match[] = {
.compatible = "samsung,ltn140at29-301",
.data = &samsung_ltn140at29_301,
}, {
+ .compatible = "sharp,lq123p1jx31",
+ .data = &sharp_lq123p1jx31,
+ }, {
.compatible = "shelly,sca07010-bfn-lnn",
.data = &shelly_sca07010_bfn_lnn,
}, {
--
1.9.1