[PATCH 2/2] ARM: dts: keystone: add interrupt property to PCI controller bindings

From: Murali Karicheri
Date: Thu Jun 02 2016 - 09:55:34 EST


Now that Keystone PCIe controller supports error interrupt handling
add interrupt property to PCI controller DT bindings to enable
error interrupt handling.

Signed-off-by: Murali Karicheri <m-karicheri2@xxxxxx>
---
- applies to master v4.7-rcx at kernel.org git repo
arch/arm/boot/dts/keystone-k2e.dtsi | 2 ++
arch/arm/boot/dts/keystone.dtsi | 2 ++
2 files changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi
index 5374c9a..9a51b8c 100644
--- a/arch/arm/boot/dts/keystone-k2e.dtsi
+++ b/arch/arm/boot/dts/keystone-k2e.dtsi
@@ -104,6 +104,8 @@
num-lanes = <2>;
bus-range = <0x00 0xff>;

+ /* error interrupt */
+ interrupts = <GIC_SPI 385 IRQ_TYPE_EDGE_RISING>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie_intc1 0>, /* INT A */
diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index f627a1c..e23f46d 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -302,6 +302,8 @@
num-lanes = <2>;
bus-range = <0x00 0xff>;

+ /* error interrupt */
+ interrupts = <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie_intc0 0>, /* INT A */
--
1.9.1