Re: [PATCH v4] usb: dwc2: fix regression on big-endian PowerPC/ARM systems

From: John Youn
Date: Fri May 13 2016 - 22:50:34 EST


On 5/13/2016 6:53 AM, Arnd Bergmann wrote:
> A patch that went into Linux-4.4 to fix big-endian mode on a Lantiq
> MIPS system unfortunately broke big-endian operation on PowerPC
> APM82181 as reported by Christian Lamparter, and likely other
> systems.
>
> It actually introduced multiple issues:
>
> - it broke big-endian ARM kernels: any machine that was working
> correctly with a little-endian kernel is no longer using byteswaps
> on big-endian kernels, which clearly breaks them.
> - On PowerPC the same thing must be true: if it was working before,
> using big-endian kernels is now broken. Unlike ARM, 32-bit PowerPC
> usually uses big-endian kernels, so they are likely all broken.
> - The barrier for dwc2_writel is on the wrong side of the __raw_writel(),
> so the MMIO no longer synchronizes with DMA operations.
> - On architectures that require specific CPU instructions for MMIO
> access, using the __raw_ variant may turn this into a pointer
> dereference that does not have the same effect as the readl/writel.
>
> This patch is a simple revert for all architectures other than MIPS,
> in the hope that we can more easily backport it to fix the regression
> on PowerPC and ARM systems without breaking the Lantiq system again.
>
> We should follow this up with a more elaborate change to add runtime
> detection of endianness, to make sure it also works on all other
> combinations of architectures and implementations of the usb-dwc2
> device. That patch however will be fairly large and not appropriate
> for backports to stable kernels.
>
> Felipe suggested a different approach, using an endianness switching
> register to always put the device into LE mode, but unfortunately
> the dwc2 hardware does not provide a generic way to do that. Also,
> I see no practical way of addressing the problem more generally by
> patching architecture specific code on MIPS.
>
> Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
> Fixes: 95c8bc360944 ("usb: dwc2: Use platform endianness when accessing registers")
> ---
> drivers/usb/dwc2/core.h | 27 +++++++++++++++++++++++++++
> 1 file changed, 27 insertions(+)
>
> diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
> index 3c58d633ce80..dec0b21fc626 100644
> --- a/drivers/usb/dwc2/core.h
> +++ b/drivers/usb/dwc2/core.h
> @@ -64,6 +64,17 @@
> DWC2_TRACE_SCHEDULER_VB(pr_fmt("%s: SCH: " fmt), \
> dev_name(hsotg->dev), ##__VA_ARGS__)
>
> +#ifdef CONFIG_MIPS
> +/*
> + * There are some MIPS machines that can run in either big-endian
> + * or little-endian mode and that use the dwc2 register without
> + * a byteswap in both ways.
> + * Unlike other architectures, MIPS apparently does not require a
> + * barrier before the __raw_writel() to synchronize with DMA but does
> + * require the barrier after the __raw_writel() to serialize a set of
> + * writes. This set of operations was added specifically for MIPS and
> + * should only be used there.
> + */
> static inline u32 dwc2_readl(const void __iomem *addr)
> {
> u32 value = __raw_readl(addr);
> @@ -90,6 +101,22 @@ static inline void dwc2_writel(u32 value, void __iomem *addr)
> pr_info("INFO:: wrote %08x to %p\n", value, addr);
> #endif
> }
> +#else
> +/* Normal architectures just use readl/write */
> +static inline u32 dwc2_readl(const void __iomem *addr)
> +{
> + return readl(addr);
> +}
> +
> +static inline void dwc2_writel(u32 value, void __iomem *addr)
> +{
> + writel(value, addr);
> +
> +#ifdef DWC2_LOG_WRITES
> + pr_info("info:: wrote %08x to %p\n", value, addr);
> +#endif
> +}
> +#endif
>
> /* Maximum number of Endpoints/HostChannels */
> #define MAX_EPS_CHANNELS 16
>

Thanks Arnd.

Acked-by: John Youn <johnyoun@xxxxxxxxxxxx>

John