[PATCH 2/2] clk: rockchip: fix the rk3399 sdmmc sample shift

From: Douglas Anderson
Date: Thu May 12 2016 - 14:03:53 EST


Just like every other Rockhip device, the MMC "_sample" clocks should
have a shift of 0, not a shift of 1. The rk3399 TRM agrees. Presumably
these values were set to 0 because of a typo.

Things _sorta_ would have worked with the incorrect sample phase shift
because of the register layout but wouldn't have been ideal and we would
have skipped lots of phases. Also: we would never actually enabled the
fine delay unless we happened to have 128 or more delay elements.

This is expected behavior before this patch:
* Try to set: 0 degrees + 1 delay elements
Actually get: 0 degrees + 0 delay elements
* Try to set: 90 degrees + 0 delay elements
Actually get: 180 degrees + 0 delay elements
* Try to set: 180 degrees + 0 delay elements
Actually get: 0 degrees + 0 delay elements
* Try to set: 270 degrees + 0 delay elements
Actually get: 180 degrees + 0 delay elements
* Try to set: 0 degrees + 129 delay elements
Actually get: 0 degrees + 2 delay elements
* Try to set: 180 degrees + 129 delay elements
Actually get: 0 degrees + 3 delay elements
* Try to set: 0 degrees + 130 delay elements
Actually get: 0 degrees + 4 delay elements

I verified that old code had a problem by turning on debug printouts and
seeing that the old code would report this for one SD card I had:
Good phase range 347-101 (115 len)
Good phase range 202-326 (125 len)

After my fix, it went down to one big good range for the same card.
This is more expected:
Good phase range 189-1 (173 len)
Good phase range 82-85 (4 len)
Good phase range 166-168 (3 len)

Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
---
drivers/clk/rockchip/clk-rk3399.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/rockchip/clk-rk3399.c b/drivers/clk/rockchip/clk-rk3399.c
index 291543f52caa..14ff3e109e1e 100644
--- a/drivers/clk/rockchip/clk-rk3399.c
+++ b/drivers/clk/rockchip/clk-rk3399.c
@@ -895,10 +895,10 @@ static struct rockchip_clk_branch rk3399_clk_branches[] __initdata = {
RK3399_CLKGATE_CON(6), 1, GFLAGS),

MMC(SCLK_SDMMC_DRV, "sdmmc_drv", "clk_sdmmc", RK3399_SDMMC_CON0, 1),
- MMC(SCLK_SDMMC_SAMPLE, "sdmmc_sample", "clk_sdmmc", RK3399_SDMMC_CON1, 1),
+ MMC(SCLK_SDMMC_SAMPLE, "sdmmc_sample", "clk_sdmmc", RK3399_SDMMC_CON1, 0),

MMC(SCLK_SDIO_DRV, "sdio_drv", "clk_sdio", RK3399_SDIO_CON0, 1),
- MMC(SCLK_SDIO_SAMPLE, "sdio_sample", "clk_sdio", RK3399_SDIO_CON1, 1),
+ MMC(SCLK_SDIO_SAMPLE, "sdio_sample", "clk_sdio", RK3399_SDIO_CON1, 0),

/* pcie */
COMPOSITE(SCLK_PCIE_PM, "clk_pcie_pm", mux_pll_src_cpll_gpll_npll_24m_p, 0,
--
2.8.0.rc3.226.g39d4020