[PATCH v2 01/32] perf/x86/intel/cqm: remove previous version of CQM and MBM

From: David Carrillo-Cisneros
Date: Wed May 11 2016 - 19:02:50 EST


Completely remove previous version of CQM + MBM driver to ease
review of new version (this patch series).

Reviewed-by: Stephane Eranian <eranian@xxxxxxxxxx>
Signed-off-by: David Carrillo-Cisneros <davidcc@xxxxxxxxxx>
---
arch/x86/events/intel/cqm.c | 1789 -------------------------------------------
include/linux/perf_event.h | 14 -
kernel/events/core.c | 10 -
kernel/trace/bpf_trace.c | 5 +-
4 files changed, 2 insertions(+), 1816 deletions(-)

diff --git a/arch/x86/events/intel/cqm.c b/arch/x86/events/intel/cqm.c
index 7b5fd81..e69de29 100644
--- a/arch/x86/events/intel/cqm.c
+++ b/arch/x86/events/intel/cqm.c
@@ -1,1789 +0,0 @@
-/*
- * Intel Cache Quality-of-Service Monitoring (CQM) support.
- *
- * Based very, very heavily on work by Peter Zijlstra.
- */
-
-#include <linux/perf_event.h>
-#include <linux/slab.h>
-#include <asm/cpu_device_id.h>
-#include "../perf_event.h"
-
-#define MSR_IA32_PQR_ASSOC 0x0c8f
-#define MSR_IA32_QM_CTR 0x0c8e
-#define MSR_IA32_QM_EVTSEL 0x0c8d
-
-#define MBM_CNTR_WIDTH 24
-/*
- * Guaranteed time in ms as per SDM where MBM counters will not overflow.
- */
-#define MBM_CTR_OVERFLOW_TIME 1000
-
-static u32 cqm_max_rmid = -1;
-static unsigned int cqm_l3_scale; /* supposedly cacheline size */
-static bool cqm_enabled, mbm_enabled;
-unsigned int mbm_socket_max;
-
-/**
- * struct intel_pqr_state - State cache for the PQR MSR
- * @rmid: The cached Resource Monitoring ID
- * @closid: The cached Class Of Service ID
- * @rmid_usecnt: The usage counter for rmid
- *
- * The upper 32 bits of MSR_IA32_PQR_ASSOC contain closid and the
- * lower 10 bits rmid. The update to MSR_IA32_PQR_ASSOC always
- * contains both parts, so we need to cache them.
- *
- * The cache also helps to avoid pointless updates if the value does
- * not change.
- */
-struct intel_pqr_state {
- u32 rmid;
- u32 closid;
- int rmid_usecnt;
-};
-
-/*
- * The cached intel_pqr_state is strictly per CPU and can never be
- * updated from a remote CPU. Both functions which modify the state
- * (intel_cqm_event_start and intel_cqm_event_stop) are called with
- * interrupts disabled, which is sufficient for the protection.
- */
-static DEFINE_PER_CPU(struct intel_pqr_state, pqr_state);
-static struct hrtimer *mbm_timers;
-/**
- * struct sample - mbm event's (local or total) data
- * @total_bytes #bytes since we began monitoring
- * @prev_msr previous value of MSR
- */
-struct sample {
- u64 total_bytes;
- u64 prev_msr;
-};
-
-/*
- * samples profiled for total memory bandwidth type events
- */
-static struct sample *mbm_total;
-/*
- * samples profiled for local memory bandwidth type events
- */
-static struct sample *mbm_local;
-
-#define pkg_id topology_physical_package_id(smp_processor_id())
-/*
- * rmid_2_index returns the index for the rmid in mbm_local/mbm_total array.
- * mbm_total[] and mbm_local[] are linearly indexed by socket# * max number of
- * rmids per socket, an example is given below
- * RMID1 of Socket0: vrmid = 1
- * RMID1 of Socket1: vrmid = 1 * (cqm_max_rmid + 1) + 1
- * RMID1 of Socket2: vrmid = 2 * (cqm_max_rmid + 1) + 1
- */
-#define rmid_2_index(rmid) ((pkg_id * (cqm_max_rmid + 1)) + rmid)
-/*
- * Protects cache_cgroups and cqm_rmid_free_lru and cqm_rmid_limbo_lru.
- * Also protects event->hw.cqm_rmid
- *
- * Hold either for stability, both for modification of ->hw.cqm_rmid.
- */
-static DEFINE_MUTEX(cache_mutex);
-static DEFINE_RAW_SPINLOCK(cache_lock);
-
-/*
- * Groups of events that have the same target(s), one RMID per group.
- */
-static LIST_HEAD(cache_groups);
-
-/*
- * Mask of CPUs for reading CQM values. We only need one per-socket.
- */
-static cpumask_t cqm_cpumask;
-
-#define RMID_VAL_ERROR (1ULL << 63)
-#define RMID_VAL_UNAVAIL (1ULL << 62)
-
-/*
- * Event IDs are used to program IA32_QM_EVTSEL before reading event
- * counter from IA32_QM_CTR
- */
-#define QOS_L3_OCCUP_EVENT_ID 0x01
-#define QOS_MBM_TOTAL_EVENT_ID 0x02
-#define QOS_MBM_LOCAL_EVENT_ID 0x03
-
-/*
- * This is central to the rotation algorithm in __intel_cqm_rmid_rotate().
- *
- * This rmid is always free and is guaranteed to have an associated
- * near-zero occupancy value, i.e. no cachelines are tagged with this
- * RMID, once __intel_cqm_rmid_rotate() returns.
- */
-static u32 intel_cqm_rotation_rmid;
-
-#define INVALID_RMID (-1)
-
-/*
- * Is @rmid valid for programming the hardware?
- *
- * rmid 0 is reserved by the hardware for all non-monitored tasks, which
- * means that we should never come across an rmid with that value.
- * Likewise, an rmid value of -1 is used to indicate "no rmid currently
- * assigned" and is used as part of the rotation code.
- */
-static inline bool __rmid_valid(u32 rmid)
-{
- if (!rmid || rmid == INVALID_RMID)
- return false;
-
- return true;
-}
-
-static u64 __rmid_read(u32 rmid)
-{
- u64 val;
-
- /*
- * Ignore the SDM, this thing is _NOTHING_ like a regular perfcnt,
- * it just says that to increase confusion.
- */
- wrmsr(MSR_IA32_QM_EVTSEL, QOS_L3_OCCUP_EVENT_ID, rmid);
- rdmsrl(MSR_IA32_QM_CTR, val);
-
- /*
- * Aside from the ERROR and UNAVAIL bits, assume this thing returns
- * the number of cachelines tagged with @rmid.
- */
- return val;
-}
-
-enum rmid_recycle_state {
- RMID_YOUNG = 0,
- RMID_AVAILABLE,
- RMID_DIRTY,
-};
-
-struct cqm_rmid_entry {
- u32 rmid;
- enum rmid_recycle_state state;
- struct list_head list;
- unsigned long queue_time;
-};
-
-/*
- * cqm_rmid_free_lru - A least recently used list of RMIDs.
- *
- * Oldest entry at the head, newest (most recently used) entry at the
- * tail. This list is never traversed, it's only used to keep track of
- * the lru order. That is, we only pick entries of the head or insert
- * them on the tail.
- *
- * All entries on the list are 'free', and their RMIDs are not currently
- * in use. To mark an RMID as in use, remove its entry from the lru
- * list.
- *
- *
- * cqm_rmid_limbo_lru - list of currently unused but (potentially) dirty RMIDs.
- *
- * This list is contains RMIDs that no one is currently using but that
- * may have a non-zero occupancy value associated with them. The
- * rotation worker moves RMIDs from the limbo list to the free list once
- * the occupancy value drops below __intel_cqm_threshold.
- *
- * Both lists are protected by cache_mutex.
- */
-static LIST_HEAD(cqm_rmid_free_lru);
-static LIST_HEAD(cqm_rmid_limbo_lru);
-
-/*
- * We use a simple array of pointers so that we can lookup a struct
- * cqm_rmid_entry in O(1). This alleviates the callers of __get_rmid()
- * and __put_rmid() from having to worry about dealing with struct
- * cqm_rmid_entry - they just deal with rmids, i.e. integers.
- *
- * Once this array is initialized it is read-only. No locks are required
- * to access it.
- *
- * All entries for all RMIDs can be looked up in the this array at all
- * times.
- */
-static struct cqm_rmid_entry **cqm_rmid_ptrs;
-
-static inline struct cqm_rmid_entry *__rmid_entry(u32 rmid)
-{
- struct cqm_rmid_entry *entry;
-
- entry = cqm_rmid_ptrs[rmid];
- WARN_ON(entry->rmid != rmid);
-
- return entry;
-}
-
-/*
- * Returns < 0 on fail.
- *
- * We expect to be called with cache_mutex held.
- */
-static u32 __get_rmid(void)
-{
- struct cqm_rmid_entry *entry;
-
- lockdep_assert_held(&cache_mutex);
-
- if (list_empty(&cqm_rmid_free_lru))
- return INVALID_RMID;
-
- entry = list_first_entry(&cqm_rmid_free_lru, struct cqm_rmid_entry, list);
- list_del(&entry->list);
-
- return entry->rmid;
-}
-
-static void __put_rmid(u32 rmid)
-{
- struct cqm_rmid_entry *entry;
-
- lockdep_assert_held(&cache_mutex);
-
- WARN_ON(!__rmid_valid(rmid));
- entry = __rmid_entry(rmid);
-
- entry->queue_time = jiffies;
- entry->state = RMID_YOUNG;
-
- list_add_tail(&entry->list, &cqm_rmid_limbo_lru);
-}
-
-static void cqm_cleanup(void)
-{
- int i;
-
- if (!cqm_rmid_ptrs)
- return;
-
- for (i = 0; i < cqm_max_rmid; i++)
- kfree(cqm_rmid_ptrs[i]);
-
- kfree(cqm_rmid_ptrs);
- cqm_rmid_ptrs = NULL;
- cqm_enabled = false;
-}
-
-static int intel_cqm_setup_rmid_cache(void)
-{
- struct cqm_rmid_entry *entry;
- unsigned int nr_rmids;
- int r = 0;
-
- nr_rmids = cqm_max_rmid + 1;
- cqm_rmid_ptrs = kzalloc(sizeof(struct cqm_rmid_entry *) *
- nr_rmids, GFP_KERNEL);
- if (!cqm_rmid_ptrs)
- return -ENOMEM;
-
- for (; r <= cqm_max_rmid; r++) {
- struct cqm_rmid_entry *entry;
-
- entry = kmalloc(sizeof(*entry), GFP_KERNEL);
- if (!entry)
- goto fail;
-
- INIT_LIST_HEAD(&entry->list);
- entry->rmid = r;
- cqm_rmid_ptrs[r] = entry;
-
- list_add_tail(&entry->list, &cqm_rmid_free_lru);
- }
-
- /*
- * RMID 0 is special and is always allocated. It's used for all
- * tasks that are not monitored.
- */
- entry = __rmid_entry(0);
- list_del(&entry->list);
-
- mutex_lock(&cache_mutex);
- intel_cqm_rotation_rmid = __get_rmid();
- mutex_unlock(&cache_mutex);
-
- return 0;
-
-fail:
- cqm_cleanup();
- return -ENOMEM;
-}
-
-/*
- * Determine if @a and @b measure the same set of tasks.
- *
- * If @a and @b measure the same set of tasks then we want to share a
- * single RMID.
- */
-static bool __match_event(struct perf_event *a, struct perf_event *b)
-{
- /* Per-cpu and task events don't mix */
- if ((a->attach_state & PERF_ATTACH_TASK) !=
- (b->attach_state & PERF_ATTACH_TASK))
- return false;
-
-#ifdef CONFIG_CGROUP_PERF
- if (a->cgrp != b->cgrp)
- return false;
-#endif
-
- /* If not task event, we're machine wide */
- if (!(b->attach_state & PERF_ATTACH_TASK))
- return true;
-
- /*
- * Events that target same task are placed into the same cache group.
- * Mark it as a multi event group, so that we update ->count
- * for every event rather than just the group leader later.
- */
- if (a->hw.target == b->hw.target) {
- b->hw.is_group_event = true;
- return true;
- }
-
- /*
- * Are we an inherited event?
- */
- if (b->parent == a)
- return true;
-
- return false;
-}
-
-#ifdef CONFIG_CGROUP_PERF
-static inline struct perf_cgroup *event_to_cgroup(struct perf_event *event)
-{
- if (event->attach_state & PERF_ATTACH_TASK)
- return perf_cgroup_from_task(event->hw.target, event->ctx);
-
- return event->cgrp;
-}
-#endif
-
-/*
- * Determine if @a's tasks intersect with @b's tasks
- *
- * There are combinations of events that we explicitly prohibit,
- *
- * PROHIBITS
- * system-wide -> cgroup and task
- * cgroup -> system-wide
- * -> task in cgroup
- * task -> system-wide
- * -> task in cgroup
- *
- * Call this function before allocating an RMID.
- */
-static bool __conflict_event(struct perf_event *a, struct perf_event *b)
-{
-#ifdef CONFIG_CGROUP_PERF
- /*
- * We can have any number of cgroups but only one system-wide
- * event at a time.
- */
- if (a->cgrp && b->cgrp) {
- struct perf_cgroup *ac = a->cgrp;
- struct perf_cgroup *bc = b->cgrp;
-
- /*
- * This condition should have been caught in
- * __match_event() and we should be sharing an RMID.
- */
- WARN_ON_ONCE(ac == bc);
-
- if (cgroup_is_descendant(ac->css.cgroup, bc->css.cgroup) ||
- cgroup_is_descendant(bc->css.cgroup, ac->css.cgroup))
- return true;
-
- return false;
- }
-
- if (a->cgrp || b->cgrp) {
- struct perf_cgroup *ac, *bc;
-
- /*
- * cgroup and system-wide events are mutually exclusive
- */
- if ((a->cgrp && !(b->attach_state & PERF_ATTACH_TASK)) ||
- (b->cgrp && !(a->attach_state & PERF_ATTACH_TASK)))
- return true;
-
- /*
- * Ensure neither event is part of the other's cgroup
- */
- ac = event_to_cgroup(a);
- bc = event_to_cgroup(b);
- if (ac == bc)
- return true;
-
- /*
- * Must have cgroup and non-intersecting task events.
- */
- if (!ac || !bc)
- return false;
-
- /*
- * We have cgroup and task events, and the task belongs
- * to a cgroup. Check for for overlap.
- */
- if (cgroup_is_descendant(ac->css.cgroup, bc->css.cgroup) ||
- cgroup_is_descendant(bc->css.cgroup, ac->css.cgroup))
- return true;
-
- return false;
- }
-#endif
- /*
- * If one of them is not a task, same story as above with cgroups.
- */
- if (!(a->attach_state & PERF_ATTACH_TASK) ||
- !(b->attach_state & PERF_ATTACH_TASK))
- return true;
-
- /*
- * Must be non-overlapping.
- */
- return false;
-}
-
-struct rmid_read {
- u32 rmid;
- u32 evt_type;
- atomic64_t value;
-};
-
-static void __intel_cqm_event_count(void *info);
-static void init_mbm_sample(u32 rmid, u32 evt_type);
-static void __intel_mbm_event_count(void *info);
-
-static bool is_mbm_event(int e)
-{
- return (e >= QOS_MBM_TOTAL_EVENT_ID && e <= QOS_MBM_LOCAL_EVENT_ID);
-}
-
-static void cqm_mask_call(struct rmid_read *rr)
-{
- if (is_mbm_event(rr->evt_type))
- on_each_cpu_mask(&cqm_cpumask, __intel_mbm_event_count, rr, 1);
- else
- on_each_cpu_mask(&cqm_cpumask, __intel_cqm_event_count, rr, 1);
-}
-
-/*
- * Exchange the RMID of a group of events.
- */
-static u32 intel_cqm_xchg_rmid(struct perf_event *group, u32 rmid)
-{
- struct perf_event *event;
- struct list_head *head = &group->hw.cqm_group_entry;
- u32 old_rmid = group->hw.cqm_rmid;
-
- lockdep_assert_held(&cache_mutex);
-
- /*
- * If our RMID is being deallocated, perform a read now.
- */
- if (__rmid_valid(old_rmid) && !__rmid_valid(rmid)) {
- struct rmid_read rr = {
- .rmid = old_rmid,
- .evt_type = group->attr.config,
- .value = ATOMIC64_INIT(0),
- };
-
- cqm_mask_call(&rr);
- local64_set(&group->count, atomic64_read(&rr.value));
- }
-
- raw_spin_lock_irq(&cache_lock);
-
- group->hw.cqm_rmid = rmid;
- list_for_each_entry(event, head, hw.cqm_group_entry)
- event->hw.cqm_rmid = rmid;
-
- raw_spin_unlock_irq(&cache_lock);
-
- /*
- * If the allocation is for mbm, init the mbm stats.
- * Need to check if each event in the group is mbm event
- * because there could be multiple type of events in the same group.
- */
- if (__rmid_valid(rmid)) {
- event = group;
- if (is_mbm_event(event->attr.config))
- init_mbm_sample(rmid, event->attr.config);
-
- list_for_each_entry(event, head, hw.cqm_group_entry) {
- if (is_mbm_event(event->attr.config))
- init_mbm_sample(rmid, event->attr.config);
- }
- }
-
- return old_rmid;
-}
-
-/*
- * If we fail to assign a new RMID for intel_cqm_rotation_rmid because
- * cachelines are still tagged with RMIDs in limbo, we progressively
- * increment the threshold until we find an RMID in limbo with <=
- * __intel_cqm_threshold lines tagged. This is designed to mitigate the
- * problem where cachelines tagged with an RMID are not steadily being
- * evicted.
- *
- * On successful rotations we decrease the threshold back towards zero.
- *
- * __intel_cqm_max_threshold provides an upper bound on the threshold,
- * and is measured in bytes because it's exposed to userland.
- */
-static unsigned int __intel_cqm_threshold;
-static unsigned int __intel_cqm_max_threshold;
-
-/*
- * Test whether an RMID has a zero occupancy value on this cpu.
- */
-static void intel_cqm_stable(void *arg)
-{
- struct cqm_rmid_entry *entry;
-
- list_for_each_entry(entry, &cqm_rmid_limbo_lru, list) {
- if (entry->state != RMID_AVAILABLE)
- break;
-
- if (__rmid_read(entry->rmid) > __intel_cqm_threshold)
- entry->state = RMID_DIRTY;
- }
-}
-
-/*
- * If we have group events waiting for an RMID that don't conflict with
- * events already running, assign @rmid.
- */
-static bool intel_cqm_sched_in_event(u32 rmid)
-{
- struct perf_event *leader, *event;
-
- lockdep_assert_held(&cache_mutex);
-
- leader = list_first_entry(&cache_groups, struct perf_event,
- hw.cqm_groups_entry);
- event = leader;
-
- list_for_each_entry_continue(event, &cache_groups,
- hw.cqm_groups_entry) {
- if (__rmid_valid(event->hw.cqm_rmid))
- continue;
-
- if (__conflict_event(event, leader))
- continue;
-
- intel_cqm_xchg_rmid(event, rmid);
- return true;
- }
-
- return false;
-}
-
-/*
- * Initially use this constant for both the limbo queue time and the
- * rotation timer interval, pmu::hrtimer_interval_ms.
- *
- * They don't need to be the same, but the two are related since if you
- * rotate faster than you recycle RMIDs, you may run out of available
- * RMIDs.
- */
-#define RMID_DEFAULT_QUEUE_TIME 250 /* ms */
-
-static unsigned int __rmid_queue_time_ms = RMID_DEFAULT_QUEUE_TIME;
-
-/*
- * intel_cqm_rmid_stabilize - move RMIDs from limbo to free list
- * @nr_available: number of freeable RMIDs on the limbo list
- *
- * Quiescent state; wait for all 'freed' RMIDs to become unused, i.e. no
- * cachelines are tagged with those RMIDs. After this we can reuse them
- * and know that the current set of active RMIDs is stable.
- *
- * Return %true or %false depending on whether stabilization needs to be
- * reattempted.
- *
- * If we return %true then @nr_available is updated to indicate the
- * number of RMIDs on the limbo list that have been queued for the
- * minimum queue time (RMID_AVAILABLE), but whose data occupancy values
- * are above __intel_cqm_threshold.
- */
-static bool intel_cqm_rmid_stabilize(unsigned int *available)
-{
- struct cqm_rmid_entry *entry, *tmp;
-
- lockdep_assert_held(&cache_mutex);
-
- *available = 0;
- list_for_each_entry(entry, &cqm_rmid_limbo_lru, list) {
- unsigned long min_queue_time;
- unsigned long now = jiffies;
-
- /*
- * We hold RMIDs placed into limbo for a minimum queue
- * time. Before the minimum queue time has elapsed we do
- * not recycle RMIDs.
- *
- * The reasoning is that until a sufficient time has
- * passed since we stopped using an RMID, any RMID
- * placed onto the limbo list will likely still have
- * data tagged in the cache, which means we'll probably
- * fail to recycle it anyway.
- *
- * We can save ourselves an expensive IPI by skipping
- * any RMIDs that have not been queued for the minimum
- * time.
- */
- min_queue_time = entry->queue_time +
- msecs_to_jiffies(__rmid_queue_time_ms);
-
- if (time_after(min_queue_time, now))
- break;
-
- entry->state = RMID_AVAILABLE;
- (*available)++;
- }
-
- /*
- * Fast return if none of the RMIDs on the limbo list have been
- * sitting on the queue for the minimum queue time.
- */
- if (!*available)
- return false;
-
- /*
- * Test whether an RMID is free for each package.
- */
- on_each_cpu_mask(&cqm_cpumask, intel_cqm_stable, NULL, true);
-
- list_for_each_entry_safe(entry, tmp, &cqm_rmid_limbo_lru, list) {
- /*
- * Exhausted all RMIDs that have waited min queue time.
- */
- if (entry->state == RMID_YOUNG)
- break;
-
- if (entry->state == RMID_DIRTY)
- continue;
-
- list_del(&entry->list); /* remove from limbo */
-
- /*
- * The rotation RMID gets priority if it's
- * currently invalid. In which case, skip adding
- * the RMID to the the free lru.
- */
- if (!__rmid_valid(intel_cqm_rotation_rmid)) {
- intel_cqm_rotation_rmid = entry->rmid;
- continue;
- }
-
- /*
- * If we have groups waiting for RMIDs, hand
- * them one now provided they don't conflict.
- */
- if (intel_cqm_sched_in_event(entry->rmid))
- continue;
-
- /*
- * Otherwise place it onto the free list.
- */
- list_add_tail(&entry->list, &cqm_rmid_free_lru);
- }
-
-
- return __rmid_valid(intel_cqm_rotation_rmid);
-}
-
-/*
- * Pick a victim group and move it to the tail of the group list.
- * @next: The first group without an RMID
- */
-static void __intel_cqm_pick_and_rotate(struct perf_event *next)
-{
- struct perf_event *rotor;
- u32 rmid;
-
- lockdep_assert_held(&cache_mutex);
-
- rotor = list_first_entry(&cache_groups, struct perf_event,
- hw.cqm_groups_entry);
-
- /*
- * The group at the front of the list should always have a valid
- * RMID. If it doesn't then no groups have RMIDs assigned and we
- * don't need to rotate the list.
- */
- if (next == rotor)
- return;
-
- rmid = intel_cqm_xchg_rmid(rotor, INVALID_RMID);
- __put_rmid(rmid);
-
- list_rotate_left(&cache_groups);
-}
-
-/*
- * Deallocate the RMIDs from any events that conflict with @event, and
- * place them on the back of the group list.
- */
-static void intel_cqm_sched_out_conflicting_events(struct perf_event *event)
-{
- struct perf_event *group, *g;
- u32 rmid;
-
- lockdep_assert_held(&cache_mutex);
-
- list_for_each_entry_safe(group, g, &cache_groups, hw.cqm_groups_entry) {
- if (group == event)
- continue;
-
- rmid = group->hw.cqm_rmid;
-
- /*
- * Skip events that don't have a valid RMID.
- */
- if (!__rmid_valid(rmid))
- continue;
-
- /*
- * No conflict? No problem! Leave the event alone.
- */
- if (!__conflict_event(group, event))
- continue;
-
- intel_cqm_xchg_rmid(group, INVALID_RMID);
- __put_rmid(rmid);
- }
-}
-
-/*
- * Attempt to rotate the groups and assign new RMIDs.
- *
- * We rotate for two reasons,
- * 1. To handle the scheduling of conflicting events
- * 2. To recycle RMIDs
- *
- * Rotating RMIDs is complicated because the hardware doesn't give us
- * any clues.
- *
- * There's problems with the hardware interface; when you change the
- * task:RMID map cachelines retain their 'old' tags, giving a skewed
- * picture. In order to work around this, we must always keep one free
- * RMID - intel_cqm_rotation_rmid.
- *
- * Rotation works by taking away an RMID from a group (the old RMID),
- * and assigning the free RMID to another group (the new RMID). We must
- * then wait for the old RMID to not be used (no cachelines tagged).
- * This ensure that all cachelines are tagged with 'active' RMIDs. At
- * this point we can start reading values for the new RMID and treat the
- * old RMID as the free RMID for the next rotation.
- *
- * Return %true or %false depending on whether we did any rotating.
- */
-static bool __intel_cqm_rmid_rotate(void)
-{
- struct perf_event *group, *start = NULL;
- unsigned int threshold_limit;
- unsigned int nr_needed = 0;
- unsigned int nr_available;
- bool rotated = false;
-
- mutex_lock(&cache_mutex);
-
-again:
- /*
- * Fast path through this function if there are no groups and no
- * RMIDs that need cleaning.
- */
- if (list_empty(&cache_groups) && list_empty(&cqm_rmid_limbo_lru))
- goto out;
-
- list_for_each_entry(group, &cache_groups, hw.cqm_groups_entry) {
- if (!__rmid_valid(group->hw.cqm_rmid)) {
- if (!start)
- start = group;
- nr_needed++;
- }
- }
-
- /*
- * We have some event groups, but they all have RMIDs assigned
- * and no RMIDs need cleaning.
- */
- if (!nr_needed && list_empty(&cqm_rmid_limbo_lru))
- goto out;
-
- if (!nr_needed)
- goto stabilize;
-
- /*
- * We have more event groups without RMIDs than available RMIDs,
- * or we have event groups that conflict with the ones currently
- * scheduled.
- *
- * We force deallocate the rmid of the group at the head of
- * cache_groups. The first event group without an RMID then gets
- * assigned intel_cqm_rotation_rmid. This ensures we always make
- * forward progress.
- *
- * Rotate the cache_groups list so the previous head is now the
- * tail.
- */
- __intel_cqm_pick_and_rotate(start);
-
- /*
- * If the rotation is going to succeed, reduce the threshold so
- * that we don't needlessly reuse dirty RMIDs.
- */
- if (__rmid_valid(intel_cqm_rotation_rmid)) {
- intel_cqm_xchg_rmid(start, intel_cqm_rotation_rmid);
- intel_cqm_rotation_rmid = __get_rmid();
-
- intel_cqm_sched_out_conflicting_events(start);
-
- if (__intel_cqm_threshold)
- __intel_cqm_threshold--;
- }
-
- rotated = true;
-
-stabilize:
- /*
- * We now need to stablize the RMID we freed above (if any) to
- * ensure that the next time we rotate we have an RMID with zero
- * occupancy value.
- *
- * Alternatively, if we didn't need to perform any rotation,
- * we'll have a bunch of RMIDs in limbo that need stabilizing.
- */
- threshold_limit = __intel_cqm_max_threshold / cqm_l3_scale;
-
- while (intel_cqm_rmid_stabilize(&nr_available) &&
- __intel_cqm_threshold < threshold_limit) {
- unsigned int steal_limit;
-
- /*
- * Don't spin if nobody is actively waiting for an RMID,
- * the rotation worker will be kicked as soon as an
- * event needs an RMID anyway.
- */
- if (!nr_needed)
- break;
-
- /* Allow max 25% of RMIDs to be in limbo. */
- steal_limit = (cqm_max_rmid + 1) / 4;
-
- /*
- * We failed to stabilize any RMIDs so our rotation
- * logic is now stuck. In order to make forward progress
- * we have a few options:
- *
- * 1. rotate ("steal") another RMID
- * 2. increase the threshold
- * 3. do nothing
- *
- * We do both of 1. and 2. until we hit the steal limit.
- *
- * The steal limit prevents all RMIDs ending up on the
- * limbo list. This can happen if every RMID has a
- * non-zero occupancy above threshold_limit, and the
- * occupancy values aren't dropping fast enough.
- *
- * Note that there is prioritisation at work here - we'd
- * rather increase the number of RMIDs on the limbo list
- * than increase the threshold, because increasing the
- * threshold skews the event data (because we reuse
- * dirty RMIDs) - threshold bumps are a last resort.
- */
- if (nr_available < steal_limit)
- goto again;
-
- __intel_cqm_threshold++;
- }
-
-out:
- mutex_unlock(&cache_mutex);
- return rotated;
-}
-
-static void intel_cqm_rmid_rotate(struct work_struct *work);
-
-static DECLARE_DELAYED_WORK(intel_cqm_rmid_work, intel_cqm_rmid_rotate);
-
-static struct pmu intel_cqm_pmu;
-
-static void intel_cqm_rmid_rotate(struct work_struct *work)
-{
- unsigned long delay;
-
- __intel_cqm_rmid_rotate();
-
- delay = msecs_to_jiffies(intel_cqm_pmu.hrtimer_interval_ms);
- schedule_delayed_work(&intel_cqm_rmid_work, delay);
-}
-
-static u64 update_sample(unsigned int rmid, u32 evt_type, int first)
-{
- struct sample *mbm_current;
- u32 vrmid = rmid_2_index(rmid);
- u64 val, bytes, shift;
- u32 eventid;
-
- if (evt_type == QOS_MBM_LOCAL_EVENT_ID) {
- mbm_current = &mbm_local[vrmid];
- eventid = QOS_MBM_LOCAL_EVENT_ID;
- } else {
- mbm_current = &mbm_total[vrmid];
- eventid = QOS_MBM_TOTAL_EVENT_ID;
- }
-
- wrmsr(MSR_IA32_QM_EVTSEL, eventid, rmid);
- rdmsrl(MSR_IA32_QM_CTR, val);
- if (val & (RMID_VAL_ERROR | RMID_VAL_UNAVAIL))
- return mbm_current->total_bytes;
-
- if (first) {
- mbm_current->prev_msr = val;
- mbm_current->total_bytes = 0;
- return mbm_current->total_bytes;
- }
-
- /*
- * The h/w guarantees that counters will not overflow
- * so long as we poll them at least once per second.
- */
- shift = 64 - MBM_CNTR_WIDTH;
- bytes = (val << shift) - (mbm_current->prev_msr << shift);
- bytes >>= shift;
-
- bytes *= cqm_l3_scale;
-
- mbm_current->total_bytes += bytes;
- mbm_current->prev_msr = val;
-
- return mbm_current->total_bytes;
-}
-
-static u64 rmid_read_mbm(unsigned int rmid, u32 evt_type)
-{
- return update_sample(rmid, evt_type, 0);
-}
-
-static void __intel_mbm_event_init(void *info)
-{
- struct rmid_read *rr = info;
-
- update_sample(rr->rmid, rr->evt_type, 1);
-}
-
-static void init_mbm_sample(u32 rmid, u32 evt_type)
-{
- struct rmid_read rr = {
- .rmid = rmid,
- .evt_type = evt_type,
- .value = ATOMIC64_INIT(0),
- };
-
- /* on each socket, init sample */
- on_each_cpu_mask(&cqm_cpumask, __intel_mbm_event_init, &rr, 1);
-}
-
-/*
- * Find a group and setup RMID.
- *
- * If we're part of a group, we use the group's RMID.
- */
-static void intel_cqm_setup_event(struct perf_event *event,
- struct perf_event **group)
-{
- struct perf_event *iter;
- bool conflict = false;
- u32 rmid;
-
- event->hw.is_group_event = false;
- list_for_each_entry(iter, &cache_groups, hw.cqm_groups_entry) {
- rmid = iter->hw.cqm_rmid;
-
- if (__match_event(iter, event)) {
- /* All tasks in a group share an RMID */
- event->hw.cqm_rmid = rmid;
- *group = iter;
- if (is_mbm_event(event->attr.config) && __rmid_valid(rmid))
- init_mbm_sample(rmid, event->attr.config);
- return;
- }
-
- /*
- * We only care about conflicts for events that are
- * actually scheduled in (and hence have a valid RMID).
- */
- if (__conflict_event(iter, event) && __rmid_valid(rmid))
- conflict = true;
- }
-
- if (conflict)
- rmid = INVALID_RMID;
- else
- rmid = __get_rmid();
-
- if (is_mbm_event(event->attr.config) && __rmid_valid(rmid))
- init_mbm_sample(rmid, event->attr.config);
-
- event->hw.cqm_rmid = rmid;
-}
-
-static void intel_cqm_event_read(struct perf_event *event)
-{
- unsigned long flags;
- u32 rmid;
- u64 val;
-
- /*
- * Task events are handled by intel_cqm_event_count().
- */
- if (event->cpu == -1)
- return;
-
- raw_spin_lock_irqsave(&cache_lock, flags);
- rmid = event->hw.cqm_rmid;
-
- if (!__rmid_valid(rmid))
- goto out;
-
- if (is_mbm_event(event->attr.config))
- val = rmid_read_mbm(rmid, event->attr.config);
- else
- val = __rmid_read(rmid);
-
- /*
- * Ignore this reading on error states and do not update the value.
- */
- if (val & (RMID_VAL_ERROR | RMID_VAL_UNAVAIL))
- goto out;
-
- local64_set(&event->count, val);
-out:
- raw_spin_unlock_irqrestore(&cache_lock, flags);
-}
-
-static void __intel_cqm_event_count(void *info)
-{
- struct rmid_read *rr = info;
- u64 val;
-
- val = __rmid_read(rr->rmid);
-
- if (val & (RMID_VAL_ERROR | RMID_VAL_UNAVAIL))
- return;
-
- atomic64_add(val, &rr->value);
-}
-
-static inline bool cqm_group_leader(struct perf_event *event)
-{
- return !list_empty(&event->hw.cqm_groups_entry);
-}
-
-static void __intel_mbm_event_count(void *info)
-{
- struct rmid_read *rr = info;
- u64 val;
-
- val = rmid_read_mbm(rr->rmid, rr->evt_type);
- if (val & (RMID_VAL_ERROR | RMID_VAL_UNAVAIL))
- return;
- atomic64_add(val, &rr->value);
-}
-
-static enum hrtimer_restart mbm_hrtimer_handle(struct hrtimer *hrtimer)
-{
- struct perf_event *iter, *iter1;
- int ret = HRTIMER_RESTART;
- struct list_head *head;
- unsigned long flags;
- u32 grp_rmid;
-
- /*
- * Need to cache_lock as the timer Event Select MSR reads
- * can race with the mbm/cqm count() and mbm_init() reads.
- */
- raw_spin_lock_irqsave(&cache_lock, flags);
-
- if (list_empty(&cache_groups)) {
- ret = HRTIMER_NORESTART;
- goto out;
- }
-
- list_for_each_entry(iter, &cache_groups, hw.cqm_groups_entry) {
- grp_rmid = iter->hw.cqm_rmid;
- if (!__rmid_valid(grp_rmid))
- continue;
- if (is_mbm_event(iter->attr.config))
- update_sample(grp_rmid, iter->attr.config, 0);
-
- head = &iter->hw.cqm_group_entry;
- if (list_empty(head))
- continue;
- list_for_each_entry(iter1, head, hw.cqm_group_entry) {
- if (!iter1->hw.is_group_event)
- break;
- if (is_mbm_event(iter1->attr.config))
- update_sample(iter1->hw.cqm_rmid,
- iter1->attr.config, 0);
- }
- }
-
- hrtimer_forward_now(hrtimer, ms_to_ktime(MBM_CTR_OVERFLOW_TIME));
-out:
- raw_spin_unlock_irqrestore(&cache_lock, flags);
-
- return ret;
-}
-
-static void __mbm_start_timer(void *info)
-{
- hrtimer_start(&mbm_timers[pkg_id], ms_to_ktime(MBM_CTR_OVERFLOW_TIME),
- HRTIMER_MODE_REL_PINNED);
-}
-
-static void __mbm_stop_timer(void *info)
-{
- hrtimer_cancel(&mbm_timers[pkg_id]);
-}
-
-static void mbm_start_timers(void)
-{
- on_each_cpu_mask(&cqm_cpumask, __mbm_start_timer, NULL, 1);
-}
-
-static void mbm_stop_timers(void)
-{
- on_each_cpu_mask(&cqm_cpumask, __mbm_stop_timer, NULL, 1);
-}
-
-static void mbm_hrtimer_init(void)
-{
- struct hrtimer *hr;
- int i;
-
- for (i = 0; i < mbm_socket_max; i++) {
- hr = &mbm_timers[i];
- hrtimer_init(hr, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
- hr->function = mbm_hrtimer_handle;
- }
-}
-
-static u64 intel_cqm_event_count(struct perf_event *event)
-{
- unsigned long flags;
- struct rmid_read rr = {
- .evt_type = event->attr.config,
- .value = ATOMIC64_INIT(0),
- };
-
- /*
- * We only need to worry about task events. System-wide events
- * are handled like usual, i.e. entirely with
- * intel_cqm_event_read().
- */
- if (event->cpu != -1)
- return __perf_event_count(event);
-
- /*
- * Only the group leader gets to report values except in case of
- * multiple events in the same group, we still need to read the
- * other events.This stops us
- * reporting duplicate values to userspace, and gives us a clear
- * rule for which task gets to report the values.
- *
- * Note that it is impossible to attribute these values to
- * specific packages - we forfeit that ability when we create
- * task events.
- */
- if (!cqm_group_leader(event) && !event->hw.is_group_event)
- return 0;
-
- /*
- * Getting up-to-date values requires an SMP IPI which is not
- * possible if we're being called in interrupt context. Return
- * the cached values instead.
- */
- if (unlikely(in_interrupt()))
- goto out;
-
- /*
- * Notice that we don't perform the reading of an RMID
- * atomically, because we can't hold a spin lock across the
- * IPIs.
- *
- * Speculatively perform the read, since @event might be
- * assigned a different (possibly invalid) RMID while we're
- * busying performing the IPI calls. It's therefore necessary to
- * check @event's RMID afterwards, and if it has changed,
- * discard the result of the read.
- */
- rr.rmid = ACCESS_ONCE(event->hw.cqm_rmid);
-
- if (!__rmid_valid(rr.rmid))
- goto out;
-
- cqm_mask_call(&rr);
-
- raw_spin_lock_irqsave(&cache_lock, flags);
- if (event->hw.cqm_rmid == rr.rmid)
- local64_set(&event->count, atomic64_read(&rr.value));
- raw_spin_unlock_irqrestore(&cache_lock, flags);
-out:
- return __perf_event_count(event);
-}
-
-static void intel_cqm_event_start(struct perf_event *event, int mode)
-{
- struct intel_pqr_state *state = this_cpu_ptr(&pqr_state);
- u32 rmid = event->hw.cqm_rmid;
-
- if (!(event->hw.cqm_state & PERF_HES_STOPPED))
- return;
-
- event->hw.cqm_state &= ~PERF_HES_STOPPED;
-
- if (state->rmid_usecnt++) {
- if (!WARN_ON_ONCE(state->rmid != rmid))
- return;
- } else {
- WARN_ON_ONCE(state->rmid);
- }
-
- state->rmid = rmid;
- wrmsr(MSR_IA32_PQR_ASSOC, rmid, state->closid);
-}
-
-static void intel_cqm_event_stop(struct perf_event *event, int mode)
-{
- struct intel_pqr_state *state = this_cpu_ptr(&pqr_state);
-
- if (event->hw.cqm_state & PERF_HES_STOPPED)
- return;
-
- event->hw.cqm_state |= PERF_HES_STOPPED;
-
- intel_cqm_event_read(event);
-
- if (!--state->rmid_usecnt) {
- state->rmid = 0;
- wrmsr(MSR_IA32_PQR_ASSOC, 0, state->closid);
- } else {
- WARN_ON_ONCE(!state->rmid);
- }
-}
-
-static int intel_cqm_event_add(struct perf_event *event, int mode)
-{
- unsigned long flags;
- u32 rmid;
-
- raw_spin_lock_irqsave(&cache_lock, flags);
-
- event->hw.cqm_state = PERF_HES_STOPPED;
- rmid = event->hw.cqm_rmid;
-
- if (__rmid_valid(rmid) && (mode & PERF_EF_START))
- intel_cqm_event_start(event, mode);
-
- raw_spin_unlock_irqrestore(&cache_lock, flags);
-
- return 0;
-}
-
-static void intel_cqm_event_destroy(struct perf_event *event)
-{
- struct perf_event *group_other = NULL;
- unsigned long flags;
-
- mutex_lock(&cache_mutex);
- /*
- * Hold the cache_lock as mbm timer handlers could be
- * scanning the list of events.
- */
- raw_spin_lock_irqsave(&cache_lock, flags);
-
- /*
- * If there's another event in this group...
- */
- if (!list_empty(&event->hw.cqm_group_entry)) {
- group_other = list_first_entry(&event->hw.cqm_group_entry,
- struct perf_event,
- hw.cqm_group_entry);
- list_del(&event->hw.cqm_group_entry);
- }
-
- /*
- * And we're the group leader..
- */
- if (cqm_group_leader(event)) {
- /*
- * If there was a group_other, make that leader, otherwise
- * destroy the group and return the RMID.
- */
- if (group_other) {
- list_replace(&event->hw.cqm_groups_entry,
- &group_other->hw.cqm_groups_entry);
- } else {
- u32 rmid = event->hw.cqm_rmid;
-
- if (__rmid_valid(rmid))
- __put_rmid(rmid);
- list_del(&event->hw.cqm_groups_entry);
- }
- }
-
- raw_spin_unlock_irqrestore(&cache_lock, flags);
-
- /*
- * Stop the mbm overflow timers when the last event is destroyed.
- */
- if (mbm_enabled && list_empty(&cache_groups))
- mbm_stop_timers();
-
- mutex_unlock(&cache_mutex);
-}
-
-static int intel_cqm_event_init(struct perf_event *event)
-{
- struct perf_event *group = NULL;
- bool rotate = false;
- unsigned long flags;
-
- if (event->attr.type != intel_cqm_pmu.type)
- return -ENOENT;
-
- if ((event->attr.config < QOS_L3_OCCUP_EVENT_ID) ||
- (event->attr.config > QOS_MBM_LOCAL_EVENT_ID))
- return -EINVAL;
-
- /* unsupported modes and filters */
- if (event->attr.exclude_user ||
- event->attr.exclude_kernel ||
- event->attr.exclude_hv ||
- event->attr.exclude_idle ||
- event->attr.exclude_host ||
- event->attr.exclude_guest ||
- event->attr.sample_period) /* no sampling */
- return -EINVAL;
-
- INIT_LIST_HEAD(&event->hw.cqm_group_entry);
- INIT_LIST_HEAD(&event->hw.cqm_groups_entry);
-
- event->destroy = intel_cqm_event_destroy;
-
- mutex_lock(&cache_mutex);
-
- /*
- * Start the mbm overflow timers when the first event is created.
- */
- if (mbm_enabled && list_empty(&cache_groups))
- mbm_start_timers();
-
- /* Will also set rmid */
- intel_cqm_setup_event(event, &group);
-
- /*
- * Hold the cache_lock as mbm timer handlers be
- * scanning the list of events.
- */
- raw_spin_lock_irqsave(&cache_lock, flags);
-
- if (group) {
- list_add_tail(&event->hw.cqm_group_entry,
- &group->hw.cqm_group_entry);
- } else {
- list_add_tail(&event->hw.cqm_groups_entry,
- &cache_groups);
-
- /*
- * All RMIDs are either in use or have recently been
- * used. Kick the rotation worker to clean/free some.
- *
- * We only do this for the group leader, rather than for
- * every event in a group to save on needless work.
- */
- if (!__rmid_valid(event->hw.cqm_rmid))
- rotate = true;
- }
-
- raw_spin_unlock_irqrestore(&cache_lock, flags);
- mutex_unlock(&cache_mutex);
-
- if (rotate)
- schedule_delayed_work(&intel_cqm_rmid_work, 0);
-
- return 0;
-}
-
-EVENT_ATTR_STR(llc_occupancy, intel_cqm_llc, "event=0x01");
-EVENT_ATTR_STR(llc_occupancy.per-pkg, intel_cqm_llc_pkg, "1");
-EVENT_ATTR_STR(llc_occupancy.unit, intel_cqm_llc_unit, "Bytes");
-EVENT_ATTR_STR(llc_occupancy.scale, intel_cqm_llc_scale, NULL);
-EVENT_ATTR_STR(llc_occupancy.snapshot, intel_cqm_llc_snapshot, "1");
-
-EVENT_ATTR_STR(total_bytes, intel_cqm_total_bytes, "event=0x02");
-EVENT_ATTR_STR(total_bytes.per-pkg, intel_cqm_total_bytes_pkg, "1");
-EVENT_ATTR_STR(total_bytes.unit, intel_cqm_total_bytes_unit, "MB");
-EVENT_ATTR_STR(total_bytes.scale, intel_cqm_total_bytes_scale, "1e-6");
-
-EVENT_ATTR_STR(local_bytes, intel_cqm_local_bytes, "event=0x03");
-EVENT_ATTR_STR(local_bytes.per-pkg, intel_cqm_local_bytes_pkg, "1");
-EVENT_ATTR_STR(local_bytes.unit, intel_cqm_local_bytes_unit, "MB");
-EVENT_ATTR_STR(local_bytes.scale, intel_cqm_local_bytes_scale, "1e-6");
-
-static struct attribute *intel_cqm_events_attr[] = {
- EVENT_PTR(intel_cqm_llc),
- EVENT_PTR(intel_cqm_llc_pkg),
- EVENT_PTR(intel_cqm_llc_unit),
- EVENT_PTR(intel_cqm_llc_scale),
- EVENT_PTR(intel_cqm_llc_snapshot),
- NULL,
-};
-
-static struct attribute *intel_mbm_events_attr[] = {
- EVENT_PTR(intel_cqm_total_bytes),
- EVENT_PTR(intel_cqm_local_bytes),
- EVENT_PTR(intel_cqm_total_bytes_pkg),
- EVENT_PTR(intel_cqm_local_bytes_pkg),
- EVENT_PTR(intel_cqm_total_bytes_unit),
- EVENT_PTR(intel_cqm_local_bytes_unit),
- EVENT_PTR(intel_cqm_total_bytes_scale),
- EVENT_PTR(intel_cqm_local_bytes_scale),
- NULL,
-};
-
-static struct attribute *intel_cmt_mbm_events_attr[] = {
- EVENT_PTR(intel_cqm_llc),
- EVENT_PTR(intel_cqm_total_bytes),
- EVENT_PTR(intel_cqm_local_bytes),
- EVENT_PTR(intel_cqm_llc_pkg),
- EVENT_PTR(intel_cqm_total_bytes_pkg),
- EVENT_PTR(intel_cqm_local_bytes_pkg),
- EVENT_PTR(intel_cqm_llc_unit),
- EVENT_PTR(intel_cqm_total_bytes_unit),
- EVENT_PTR(intel_cqm_local_bytes_unit),
- EVENT_PTR(intel_cqm_llc_scale),
- EVENT_PTR(intel_cqm_total_bytes_scale),
- EVENT_PTR(intel_cqm_local_bytes_scale),
- EVENT_PTR(intel_cqm_llc_snapshot),
- NULL,
-};
-
-static struct attribute_group intel_cqm_events_group = {
- .name = "events",
- .attrs = NULL,
-};
-
-PMU_FORMAT_ATTR(event, "config:0-7");
-static struct attribute *intel_cqm_formats_attr[] = {
- &format_attr_event.attr,
- NULL,
-};
-
-static struct attribute_group intel_cqm_format_group = {
- .name = "format",
- .attrs = intel_cqm_formats_attr,
-};
-
-static ssize_t
-max_recycle_threshold_show(struct device *dev, struct device_attribute *attr,
- char *page)
-{
- ssize_t rv;
-
- mutex_lock(&cache_mutex);
- rv = snprintf(page, PAGE_SIZE-1, "%u\n", __intel_cqm_max_threshold);
- mutex_unlock(&cache_mutex);
-
- return rv;
-}
-
-static ssize_t
-max_recycle_threshold_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- unsigned int bytes, cachelines;
- int ret;
-
- ret = kstrtouint(buf, 0, &bytes);
- if (ret)
- return ret;
-
- mutex_lock(&cache_mutex);
-
- __intel_cqm_max_threshold = bytes;
- cachelines = bytes / cqm_l3_scale;
-
- /*
- * The new maximum takes effect immediately.
- */
- if (__intel_cqm_threshold > cachelines)
- __intel_cqm_threshold = cachelines;
-
- mutex_unlock(&cache_mutex);
-
- return count;
-}
-
-static DEVICE_ATTR_RW(max_recycle_threshold);
-
-static struct attribute *intel_cqm_attrs[] = {
- &dev_attr_max_recycle_threshold.attr,
- NULL,
-};
-
-static const struct attribute_group intel_cqm_group = {
- .attrs = intel_cqm_attrs,
-};
-
-static const struct attribute_group *intel_cqm_attr_groups[] = {
- &intel_cqm_events_group,
- &intel_cqm_format_group,
- &intel_cqm_group,
- NULL,
-};
-
-static struct pmu intel_cqm_pmu = {
- .hrtimer_interval_ms = RMID_DEFAULT_QUEUE_TIME,
- .attr_groups = intel_cqm_attr_groups,
- .task_ctx_nr = perf_sw_context,
- .event_init = intel_cqm_event_init,
- .add = intel_cqm_event_add,
- .del = intel_cqm_event_stop,
- .start = intel_cqm_event_start,
- .stop = intel_cqm_event_stop,
- .read = intel_cqm_event_read,
- .count = intel_cqm_event_count,
-};
-
-static inline void cqm_pick_event_reader(int cpu)
-{
- int reader;
-
- /* First online cpu in package becomes the reader */
- reader = cpumask_any_and(&cqm_cpumask, topology_core_cpumask(cpu));
- if (reader >= nr_cpu_ids)
- cpumask_set_cpu(cpu, &cqm_cpumask);
-}
-
-static void intel_cqm_cpu_starting(unsigned int cpu)
-{
- struct intel_pqr_state *state = &per_cpu(pqr_state, cpu);
- struct cpuinfo_x86 *c = &cpu_data(cpu);
-
- state->rmid = 0;
- state->closid = 0;
- state->rmid_usecnt = 0;
-
- WARN_ON(c->x86_cache_max_rmid != cqm_max_rmid);
- WARN_ON(c->x86_cache_occ_scale != cqm_l3_scale);
-}
-
-static void intel_cqm_cpu_exit(unsigned int cpu)
-{
- int target;
-
- /* Is @cpu the current cqm reader for this package ? */
- if (!cpumask_test_and_clear_cpu(cpu, &cqm_cpumask))
- return;
-
- /* Find another online reader in this package */
- target = cpumask_any_but(topology_core_cpumask(cpu), cpu);
-
- if (target < nr_cpu_ids)
- cpumask_set_cpu(target, &cqm_cpumask);
-}
-
-static int intel_cqm_cpu_notifier(struct notifier_block *nb,
- unsigned long action, void *hcpu)
-{
- unsigned int cpu = (unsigned long)hcpu;
-
- switch (action & ~CPU_TASKS_FROZEN) {
- case CPU_DOWN_PREPARE:
- intel_cqm_cpu_exit(cpu);
- break;
- case CPU_STARTING:
- intel_cqm_cpu_starting(cpu);
- cqm_pick_event_reader(cpu);
- break;
- }
-
- return NOTIFY_OK;
-}
-
-static const struct x86_cpu_id intel_cqm_match[] = {
- { .vendor = X86_VENDOR_INTEL, .feature = X86_FEATURE_CQM_OCCUP_LLC },
- {}
-};
-
-static void mbm_cleanup(void)
-{
- if (!mbm_enabled)
- return;
-
- kfree(mbm_local);
- kfree(mbm_total);
- mbm_enabled = false;
-}
-
-static const struct x86_cpu_id intel_mbm_local_match[] = {
- { .vendor = X86_VENDOR_INTEL, .feature = X86_FEATURE_CQM_MBM_LOCAL },
- {}
-};
-
-static const struct x86_cpu_id intel_mbm_total_match[] = {
- { .vendor = X86_VENDOR_INTEL, .feature = X86_FEATURE_CQM_MBM_TOTAL },
- {}
-};
-
-static int intel_mbm_init(void)
-{
- int ret = 0, array_size, maxid = cqm_max_rmid + 1;
-
- mbm_socket_max = topology_max_packages();
- array_size = sizeof(struct sample) * maxid * mbm_socket_max;
- mbm_local = kmalloc(array_size, GFP_KERNEL);
- if (!mbm_local)
- return -ENOMEM;
-
- mbm_total = kmalloc(array_size, GFP_KERNEL);
- if (!mbm_total) {
- ret = -ENOMEM;
- goto out;
- }
-
- array_size = sizeof(struct hrtimer) * mbm_socket_max;
- mbm_timers = kmalloc(array_size, GFP_KERNEL);
- if (!mbm_timers) {
- ret = -ENOMEM;
- goto out;
- }
- mbm_hrtimer_init();
-
-out:
- if (ret)
- mbm_cleanup();
-
- return ret;
-}
-
-static int __init intel_cqm_init(void)
-{
- char *str = NULL, scale[20];
- int i, cpu, ret;
-
- if (x86_match_cpu(intel_cqm_match))
- cqm_enabled = true;
-
- if (x86_match_cpu(intel_mbm_local_match) &&
- x86_match_cpu(intel_mbm_total_match))
- mbm_enabled = true;
-
- if (!cqm_enabled && !mbm_enabled)
- return -ENODEV;
-
- cqm_l3_scale = boot_cpu_data.x86_cache_occ_scale;
-
- /*
- * It's possible that not all resources support the same number
- * of RMIDs. Instead of making scheduling much more complicated
- * (where we have to match a task's RMID to a cpu that supports
- * that many RMIDs) just find the minimum RMIDs supported across
- * all cpus.
- *
- * Also, check that the scales match on all cpus.
- */
- cpu_notifier_register_begin();
-
- for_each_online_cpu(cpu) {
- struct cpuinfo_x86 *c = &cpu_data(cpu);
-
- if (c->x86_cache_max_rmid < cqm_max_rmid)
- cqm_max_rmid = c->x86_cache_max_rmid;
-
- if (c->x86_cache_occ_scale != cqm_l3_scale) {
- pr_err("Multiple LLC scale values, disabling\n");
- ret = -EINVAL;
- goto out;
- }
- }
-
- /*
- * A reasonable upper limit on the max threshold is the number
- * of lines tagged per RMID if all RMIDs have the same number of
- * lines tagged in the LLC.
- *
- * For a 35MB LLC and 56 RMIDs, this is ~1.8% of the LLC.
- */
- __intel_cqm_max_threshold =
- boot_cpu_data.x86_cache_size * 1024 / (cqm_max_rmid + 1);
-
- snprintf(scale, sizeof(scale), "%u", cqm_l3_scale);
- str = kstrdup(scale, GFP_KERNEL);
- if (!str) {
- ret = -ENOMEM;
- goto out;
- }
-
- event_attr_intel_cqm_llc_scale.event_str = str;
-
- ret = intel_cqm_setup_rmid_cache();
- if (ret)
- goto out;
-
- for_each_online_cpu(i) {
- intel_cqm_cpu_starting(i);
- cqm_pick_event_reader(i);
- }
-
- if (mbm_enabled)
- ret = intel_mbm_init();
- if (ret && !cqm_enabled)
- goto out;
-
- if (cqm_enabled && mbm_enabled)
- intel_cqm_events_group.attrs = intel_cmt_mbm_events_attr;
- else if (!cqm_enabled && mbm_enabled)
- intel_cqm_events_group.attrs = intel_mbm_events_attr;
- else if (cqm_enabled && !mbm_enabled)
- intel_cqm_events_group.attrs = intel_cqm_events_attr;
-
- ret = perf_pmu_register(&intel_cqm_pmu, "intel_cqm", -1);
- if (ret) {
- pr_err("Intel CQM perf registration failed: %d\n", ret);
- goto out;
- }
-
- if (cqm_enabled)
- pr_info("Intel CQM monitoring enabled\n");
- if (mbm_enabled)
- pr_info("Intel MBM enabled\n");
-
- /*
- * Register the hot cpu notifier once we are sure cqm
- * is enabled to avoid notifier leak.
- */
- __perf_cpu_notifier(intel_cqm_cpu_notifier);
-out:
- cpu_notifier_register_done();
- if (ret) {
- kfree(str);
- cqm_cleanup();
- mbm_cleanup();
- }
-
- return ret;
-}
-device_initcall(intel_cqm_init);
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index b425f2d..1417d3b 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -118,14 +118,6 @@ struct hw_perf_event {
/* for tp_event->class */
struct list_head tp_list;
};
- struct { /* intel_cqm */
- int cqm_state;
- u32 cqm_rmid;
- int is_group_event;
- struct list_head cqm_events_entry;
- struct list_head cqm_groups_entry;
- struct list_head cqm_group_entry;
- };
struct { /* itrace */
int itrace_started;
};
@@ -387,12 +379,6 @@ struct pmu {
*/
size_t task_ctx_size;

-
- /*
- * Return the count value for a counter.
- */
- u64 (*count) (struct perf_event *event); /*optional*/
-
/*
* Set up pmu-private data structures for an AUX area
*/
diff --git a/kernel/events/core.c b/kernel/events/core.c
index 050a290..d464e57 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -3388,9 +3388,6 @@ unlock:

static inline u64 perf_event_count(struct perf_event *event)
{
- if (event->pmu->count)
- return event->pmu->count(event);
-
return __perf_event_count(event);
}

@@ -3400,7 +3397,6 @@ static inline u64 perf_event_count(struct perf_event *event)
* - either for the current task, or for this CPU
* - does not have inherit set, for inherited task events
* will not be local and we cannot read them atomically
- * - must not have a pmu::count method
*/
u64 perf_event_read_local(struct perf_event *event)
{
@@ -3428,12 +3424,6 @@ u64 perf_event_read_local(struct perf_event *event)
WARN_ON_ONCE(event->attr.inherit);

/*
- * It must not have a pmu::count method, those are not
- * NMI safe.
- */
- WARN_ON_ONCE(event->pmu->count);
-
- /*
* If the event is currently on this CPU, its either a per-task event,
* or local to this CPU. Furthermore it means its ACTIVE (otherwise
* oncpu == -1).
diff --git a/kernel/trace/bpf_trace.c b/kernel/trace/bpf_trace.c
index 3e4ffb3..7ef81b3 100644
--- a/kernel/trace/bpf_trace.c
+++ b/kernel/trace/bpf_trace.c
@@ -200,9 +200,8 @@ static u64 bpf_perf_event_read(u64 r1, u64 index, u64 r3, u64 r4, u64 r5)

event = file->private_data;

- /* make sure event is local and doesn't have pmu::count */
- if (event->oncpu != smp_processor_id() ||
- event->pmu->count)
+ /* make sure event is local */
+ if (event->oncpu != smp_processor_id())
return -EINVAL;

/*
--
2.8.0.rc3.226.g39d4020