Re: [PATCH RESEND v3 1/2] drm: introduce bus_flags in drm_display_info

From: Mark yao
Date: Thu May 05 2016 - 02:18:55 EST


Hi Stefan

Actually, the pixel clock or data enable polarity are also needed by drm/rockchip,

but I have a question:

why not add these polarity into drm_display_mode->flags. drm_display_mode->flags has hsync and vsync polarity,
I think it's cool that add pixel clock or data enable polarity on drm_display_mode->flags.

The polarity seems should be used on crtc, but crtc can't direct get the panel, save polarity on panel_desc means need more work to transmit it to crtc.

Thanks.

On 2016å05æ05æ 13:08, Stefan Agner wrote:
Introduce bus_flags to specify display bus properties like signal
polarities. This is useful for parallel display buses, e.g. to
specify the pixel clock or data enable polarity.

Suggested-by: Thierry Reding <thierry.reding@xxxxxxxxx>
Acked-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
Acked-by: Manfred Schlaegl <manfred.schlaegl@xxxxxx>
Acked-by: Daniel Vetter <daniel.vetter@xxxxxxxx>
Signed-off-by: Stefan Agner <stefan@xxxxxxxx>
---
drivers/gpu/drm/panel/panel-simple.c | 2 ++
include/drm/drm_crtc.h | 9 +++++++++
2 files changed, 11 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index ceb2048..77ae07f 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -72,6 +72,7 @@ struct panel_desc {
} delay;
u32 bus_format;
+ u32 bus_flags;
};
struct panel_simple {
@@ -144,6 +145,7 @@ static int panel_simple_get_fixed_modes(struct panel_simple *panel)
if (panel->desc->bus_format)
drm_display_info_set_bus_formats(&connector->display_info,
&panel->desc->bus_format, 1);
+ connector->display_info.bus_flags = panel->desc->bus_flags;
return num;
}
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 4acdaf5..d1559cd 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -118,6 +118,14 @@ enum subpixel_order {
#define DRM_COLOR_FORMAT_RGB444 (1<<0)
#define DRM_COLOR_FORMAT_YCRCB444 (1<<1)
#define DRM_COLOR_FORMAT_YCRCB422 (1<<2)
+
+#define DRM_BUS_FLAG_DE_LOW (1<<0)
+#define DRM_BUS_FLAG_DE_HIGH (1<<1)
+/* drive data on pos. edge */
+#define DRM_BUS_FLAG_PIXDATA_POSEDGE (1<<2)
+/* drive data on neg. edge */
+#define DRM_BUS_FLAG_PIXDATA_NEGEDGE (1<<3)
+
/*
* Describes a given display (e.g. CRT or flat panel) and its limitations.
*/
@@ -139,6 +147,7 @@ struct drm_display_info {
const u32 *bus_formats;
unsigned int num_bus_formats;
+ u32 bus_flags;
/* Mask of supported hdmi deep color modes */
u8 edid_hdmi_dc_modes;


--
ïark Yao