Re: [Xen-devel] efi_enabled(EFI_PARAVIRT) use

From: Shannon Zhao
Date: Mon May 02 2016 - 21:45:57 EST




On 2016/5/2 18:45, Matt Fleming wrote:
> On Sun, 01 May, at 10:36:51PM, Shannon Zhao wrote:
>> So is there any other way you suggest?
>
> Would this work (compile tested but not runtime tested)?
>
> ---
>
> diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c
> index 3a69ed5ecfcb..13d8be16447a 100644
> --- a/drivers/firmware/efi/efi.c
> +++ b/drivers/firmware/efi/efi.c
> @@ -469,12 +469,14 @@ device_initcall(efi_load_efivars);
> FIELD_SIZEOF(struct efi_fdt_params, field) \
> }
>
> -static __initdata struct {
> +struct params {
> const char name[32];
> const char propname[32];
> int offset;
> int size;
> -} dt_params[] = {
> +};
> +
> +static __initdata struct params fdt_params[] = {
> UEFI_PARAM("System Table", "linux,uefi-system-table", system_table),
> UEFI_PARAM("MemMap Address", "linux,uefi-mmap-start", mmap),
> UEFI_PARAM("MemMap Size", "linux,uefi-mmap-size", mmap_size),
> @@ -482,44 +484,83 @@ static __initdata struct {
> UEFI_PARAM("MemMap Desc. Version", "linux,uefi-mmap-desc-ver", desc_ver)
> };
>
> +static __initdata struct params xen_fdt_params[] = {
> + UEFI_PARAM("System Table", "xen,uefi-system-table", system_table),
> + UEFI_PARAM("MemMap Address", "xen,uefi-mmap-start", mmap),
> + UEFI_PARAM("MemMap Size", "xen,uefi-mmap-size", mmap_size),
> + UEFI_PARAM("MemMap Desc. Size", "xen,uefi-mmap-desc-size", desc_size),
> + UEFI_PARAM("MemMap Desc. Version", "xen,uefi-mmap-desc-ver", desc_ver)
> +};
> +
> +#define EFI_FDT_PARAMS_SIZE ARRAY_SIZE(fdt_params)
> +
> +static __initdata struct {
> + const char *uname;
> + struct params *params;
> +} dt_params[] = {
> + { "hypervisor", xen_fdt_params },
While the uefi params are located under /hypervisor/uefi node not
/hypervisor node.

> + { "chosen", fdt_params },
> +};
> +
> struct param_info {
> int found;
> void *params;
> + const char *missing;
> };
>
> -static int __init fdt_find_uefi_params(unsigned long node, const char *uname,
> - int depth, void *data)
> +static int __init __find_uefi_params(unsigned long node,
> + struct param_info *info,
> + struct params *params)
> {
> - struct param_info *info = data;
> const void *prop;
> void *dest;
> u64 val;
> int i, len;
>
> - if (depth != 1 || strcmp(uname, "chosen") != 0)
> - return 0;
> -
> - for (i = 0; i < ARRAY_SIZE(dt_params); i++) {
> - prop = of_get_flat_dt_prop(node, dt_params[i].propname, &len);
> - if (!prop)
> + for (i = 0; i < EFI_FDT_PARAMS_SIZE; i++) {
> + prop = of_get_flat_dt_prop(node, params[i].propname, &len);
> + if (!prop) {
> + info->missing = params[i].name;
> return 0;
> - dest = info->params + dt_params[i].offset;
> + }
> +
> + dest = info->params + params[i].offset;
> info->found++;
>
> val = of_read_number(prop, len / sizeof(u32));
>
> - if (dt_params[i].size == sizeof(u32))
> + if (params[i].size == sizeof(u32))
> *(u32 *)dest = val;
> else
> *(u64 *)dest = val;
>
> if (efi_enabled(EFI_DBG))
> - pr_info(" %s: 0x%0*llx\n", dt_params[i].name,
> - dt_params[i].size * 2, val);
> + pr_info(" %s: 0x%0*llx\n", params[i].name,
> + params[i].size * 2, val);
> }
> +
> return 1;
> }
>
> +static int __init fdt_find_uefi_params(unsigned long node, const char *uname,
> + int depth, void *data)
> +{
> + struct param_info *info = data;
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(dt_params); i++) {
> +
> + if (depth != 1 || strcmp(uname, dt_params[i].uname) != 0) {
> + info->missing = dt_params[i].params[0].name;
> + continue;
> + }
> +
So here it needs to check whether the node is /hypervisor. If so, get
the subnode "uefi". Like below:
if (strcmp(uname, "hypervisor") == 0) {
offset = of_get_flat_dt_subnode_by_name(node, "uefi");
if (offset < 0)
return 0;
node = offset;
}

> + return __find_uefi_params(node, info, dt_params[i].params);
> + }
> +
> + return 0;
> +}
> +
> int __init efi_get_fdt_params(struct efi_fdt_params *params)
> {
> struct param_info info;
> @@ -535,7 +576,7 @@ int __init efi_get_fdt_params(struct efi_fdt_params *params)
> pr_info("UEFI not found.\n");
> else if (!ret)
> pr_err("Can't find '%s' in device tree!\n",
> - dt_params[info.found].name);
> + info.missing);
>
> return ret;
> }
>

--
Shannon