Re: [PATCH V6 03/13] x86, ia64: Include acpi_pci_{add|remove}_bus to the default pcibios_{add|remove}_bus implementation.

From: Tomasz Nowicki
Date: Wed Apr 27 2016 - 09:20:24 EST


On 27.04.2016 04:34, Bjorn Helgaas wrote:
On Fri, Apr 15, 2016 at 07:06:38PM +0200, Tomasz Nowicki wrote:
x86 and ia64 are the only arches that implement pcibios_{add|remove}_bus hooks
and implement them in the same way. Moreover ARM64 is going to do the same.
So it seems that acpi_pci_{add|remove}_bus is generic enough to be default
option for pcibios_{add|remove}_bus hooks. Also, it is always safe to run
acpi_pci_{add|remove}_bus as they have empty stubs for !ACPI case and
return if ACPI has been switched off in run time.

After all we can remove x86 and ia64 pcibios_{add|remove}_bus
implementation.

Signed-off-by: Tomasz Nowicki <tn@xxxxxxxxxxxx>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
Tested-by: Duc Dang <dhdang@xxxxxxx>
Tested-by: Dongdong Liu <liudongdong3@xxxxxxxxxx>
Tested-by: Hanjun Guo <hanjun.guo@xxxxxxxxxx>
Tested-by: Graeme Gregory <graeme.gregory@xxxxxxxxxx>
Tested-by: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
---
arch/ia64/pci/pci.c | 10 ----------
arch/x86/pci/common.c | 10 ----------
drivers/pci/probe.c | 3 +++
3 files changed, 3 insertions(+), 20 deletions(-)

diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index 978d6af..be4c9ef 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -358,16 +358,6 @@ void pcibios_fixup_bus(struct pci_bus *b)
platform_pci_fixup_bus(b);
}

-void pcibios_add_bus(struct pci_bus *bus)
-{
- acpi_pci_add_bus(bus);
-}
-
-void pcibios_remove_bus(struct pci_bus *bus)
-{
- acpi_pci_remove_bus(bus);
-}
-
void pcibios_set_master (struct pci_dev *dev)
{
/* No special bus mastering setup handling */
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 381a43c..7763a84 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -170,16 +170,6 @@ void pcibios_fixup_bus(struct pci_bus *b)
pcibios_fixup_device_resources(dev);
}

-void pcibios_add_bus(struct pci_bus *bus)
-{
- acpi_pci_add_bus(bus);
-}
-
-void pcibios_remove_bus(struct pci_bus *bus)
-{
- acpi_pci_remove_bus(bus);
-}
-
/*
* Only use DMI information to set this if nothing was passed
* on the kernel command line (which was parsed earlier).
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 8087297..ef569e8 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -12,6 +12,7 @@
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/cpumask.h>
+#include <linux/pci-acpi.h>
#include <linux/pci-aspm.h>
#include <linux/aer.h>
#include <linux/acpi.h>
@@ -2101,10 +2102,12 @@ int __weak pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)

void __weak pcibios_add_bus(struct pci_bus *bus)
{
+ acpi_pci_add_bus(bus);
}

void __weak pcibios_remove_bus(struct pci_bus *bus)
{
+ acpi_pci_remove_bus(bus);
}

Is this buying us something more than just getting rid of these
pcibios functions in the arches? The arch-specific pcibios methods
by themselves don't seem too onerous, and I don't really want to add
#includes and calls to every firmware interface under the sun.

I admit it's a net removal of 17 lines, but I'm not sure it's a net
reduction in complexity for the reader, who now has to remember that
this ACPI stuff is a no-op on most arches.

As a tangent, some of the stuff in acpi_pci_add_bus() really belongs
elsewhere anyway. For example, the _DSM stuff should probably be in
acpi_pci_root_create() since it's a one-per-host bridge kind of thing.


OK, I will add pcibios_add_bus to ARM64 arch code and call acpi_pci_remove_bus(bus) from there.

Thanks,
Tomasz