Re: [PATCH] qla1280: Reduce can_queue to 32

From: Johannes Thumshirn
Date: Fri Apr 22 2016 - 10:01:56 EST


On Fri, Apr 22, 2016 at 08:16:44AM -0400, Laurence Oberman wrote:
> The change looks fine, I see its hard-coded to 32 in qla1280_set_defaults()
> Would it be better to create a #define like other drivers and use that in both.
> Also did the below patch resolve this for the bug reporter.

Yes, that's probably a reasonable idea, I'll re-send.

> I ask because if I check 4.3 it was also set to the same value of 0xfffff and that is reported as working.
> So other changes in 4.4 must be "abusing" this high value.

I think it was introduced with commit 64d513ac31b - "scsi: use host wide
tags by default". Since this commit scsi_add_host_with_dma() directly calls
blk_init_tags() instead of scsi_init_shared_tag_map(). The qla1280 driver
has never set up the block tags though, so the bogus value was not a problem.
That at least is my analysis, feel free to correct my assumptions.

>
> Reviewed-by Laurence Oberman <loberman@xxxxxxxxxx>
>
> Laurence Oberman
> Principal Software Maintenance Engineer
> Red Hat Global Support Services
>
> ----- Original Message -----
> From: "Johannes Thumshirn" <jthumshirn@xxxxxxx>
> To: "Martin K . Petersen" <martin.petersen@xxxxxxxxxx>, "James E . J . Bottomley" <jejb@xxxxxxxxxxxxxxxxxx>
> Cc: linux-scsi@xxxxxxxxxxxxxxx, linux-kernel@xxxxxxxxxxxxxxx, "Johannes Thumshirn" <jthumshirn@xxxxxxx>, "Laura Abbott" <labbott@xxxxxxxxxx>, "Michael Reed" <mdr@xxxxxxx>, stable@xxxxxxxxxxxxxxx
> Sent: Friday, April 22, 2016 3:31:10 AM
> Subject: [PATCH] qla1280: Reduce can_queue to 32
>
> It was reported in https://bugzilla.redhat.com/show_bug.cgi?id=1321033,
> that the qla1280 driver sets the scsi_host_template's can_queue field
> to 0xfffff which results in an allocation failure when allocating the
> block layer tags for the driver's queues like the one shown below:
>
> [ 4.804166] scsi host0: QLogic QLA1040 PCI to SCSI Host Adapter Firmware version: 7.65.06, Driver version 3.27.1
> [ 4.804174] ------------[ cut here ]------------
> [ 4.804184] WARNING: CPU: 2 PID: 305 at mm/page_alloc.c:2989 alloc_pages_nodemask+0xae8/0xbc0()
> [ 4.804186] Modules linked in: amdkfd amd_iommu_v2 radeon i2c_algo_bit m_kms_helper ttm drm megaraid_sas serio_raw 8021q garp bnx2 stp llc mrp nhme qla1280(+) fjes
> [ 4.804208] CPU: 2 PID: 305 Comm: systemd-udevd Not tainted 4.6-201.fc22.x86_64 #1
> [ 4.804210] Hardware name: Google Enterprise Search Appliance/0DT021, OS 1.1.2 08/14/2006
> [ 4.804212] 0000000000000286 000000002f01064c ffff88042985b710 ffffff813b542e
> [ 4.804216] 0000000000000000 ffffffff81a75024 ffff88042985b748 ffffff810a40f2
> [ 4.804220] 0000000000000000 0000000000000000 000000000000000b 00000000000000
> [ 4.804223] Call Trace:
> [ 4.804231] [<ffffffff813b542e>] dump_stack+0x63/0x85
> [ 4.804236] [<ffffffff810a40f2>] warn_slowpath_common+0x82/0xc0
> [ 4.804239] [<ffffffff810a423a>] warn_slowpath_null+0x1a/0x20
> [ 4.804242] [<ffffffff811b75e8>] __alloc_pages_nodemask+0xae8/0xbc0
> [ 4.804247] [<ffffffff817a002e>] ? _raw_spin_unlock_irqrestore+0xe/0x10
> [ 4.804251] [<ffffffff811908be>] ? irq_work_queue+0x8e/0xa0
> [ 4.804256] [<ffffffff810fa10a>] ? console_unlock+0x20a/0x540
> [ 4.804262] [<ffffffff812029cc>] alloc_pages_current+0x8c/0x110
> [ 4.804265] [<ffffffff811b5159>] alloc_kmem_pages+0x19/0x90
> [ 4.804268] [<ffffffff811d2efe>] kmalloc_order_trace+0x2e/0xe0
> [ 4.804272] [<ffffffff8120e6d2>] __kmalloc+0x232/0x260
> [ 4.804277] [<ffffffff8138990d>] init_tag_map+0x3d/0xc0
> [ 4.804290] [<ffffffff813899d5>] __blk_queue_init_tags+0x45/0x80
> [ 4.804293] [<ffffffff81389a24>] blk_init_tags+0x14/0x20
> [ 4.804298] [<ffffffff81520e60>] scsi_add_host_with_dma+0x80/0x300
> [ 4.804305] [<ffffffffa000fec3>] qla1280_probe_one+0x683/0x9ef [qla1280]
> [ 4.804309] [<ffffffff81401115>] local_pci_probe+0x45/0xa0
> [ 4.804312] [<ffffffff814024fd>] pci_device_probe+0xfd/0x140
> [ 4.804316] [<ffffffff814ef1d2>] driver_probe_device+0x222/0x490
> [ 4.804319] [<ffffffff814ef4c4>] __driver_attach+0x84/0x90
> [ 4.804321] [<ffffffff814ef440>] ? driver_probe_device+0x490/0x490
> [ 4.804324] [<ffffffff814eccac>] bus_for_each_dev+0x6c/0xc0
> [ 4.804326] [<ffffffff814ee98e>] driver_attach+0x1e/0x20
> [ 4.804328] [<ffffffff814ee4cb>] bus_add_driver+0x1eb/0x280
> [ 4.804331] [<ffffffffa0015000>] ? 0xffffffffa0015000
> [ 4.804333] [<ffffffff814efd80>] driver_register+0x60/0xe0
> [ 4.804336] [<ffffffff81400a5c>] __pci_register_driver+0x4c/0x50
> [ 4.804339] [<ffffffffa00151ce>] qla1280_init+0x1ce/0x1000 [qla1280]
> [ 4.804341] [<ffffffffa0015000>] ? 0xffffffffa0015000
> [ 4.804345] [<ffffffff81002123>] do_one_initcall+0xb3/0x200
> [ 4.804348] [<ffffffff8120d086>] ? kmem_cache_alloc_trace+0x196/0x210
> [ 4.804352] [<ffffffff811aba7e>] ? do_init_module+0x27/0x1cb
> [ 4.804354] [<ffffffff811abab6>] do_init_module+0x5f/0x1cb
> [ 4.804358] [<ffffffff8112a6e0>] load_module+0x2040/0x2680
> [ 4.804360] [<ffffffff81126e40>] ? __symbol_put+0x60/0x60
> [ 4.804363] [<ffffffff8112ae69>] SYSC_init_module+0x149/0x190
> [ 4.804366] [<ffffffff8112af9e>] SyS_init_module+0xe/0x10
> [ 4.804369] [<ffffffff817a05ae>] entry_SYSCALL_64_fastpath+0x12/0x71
> [ 4.804371] ---[ end trace 0ea3b625f86705f7 ]---
> [ 4.804581] qla1280: probe of 0000:11:04.0 failed with error -12
>
> In qla1280_set_defaults() the maximum queue depth is
> set to 32 so adopt the scsi_host_template to it as well.
>
> Signed-off-by: Johannes Thumshirn <jthumshirn@xxxxxxx>
> Cc: Laura Abbott <labbott@xxxxxxxxxx>
> Cc: Michael Reed <mdr@xxxxxxx>
> Cc: stable@xxxxxxxxxxxxxxx
> ---
> drivers/scsi/qla1280.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
> index 5d0ec42..6bd748e 100644
> --- a/drivers/scsi/qla1280.c
> +++ b/drivers/scsi/qla1280.c
> @@ -4214,7 +4214,7 @@ static struct scsi_host_template qla1280_driver_template = {
> .eh_bus_reset_handler = qla1280_eh_bus_reset,
> .eh_host_reset_handler = qla1280_eh_adapter_reset,
> .bios_param = qla1280_biosparam,
> - .can_queue = 0xfffff,
> + .can_queue = 32,
> .this_id = -1,
> .sg_tablesize = SG_ALL,
> .use_clustering = ENABLE_CLUSTERING,
> --
> 2.8.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html

--
Johannes Thumshirn Storage
jthumshirn@xxxxxxx +49 911 74053 689
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)
Key fingerprint = EC38 9CAB C2C4 F25D 8600 D0D0 0393 969D 2D76 0850