[PATCH v3] drm/dsi: Implement set tear scanline

From: Vinay Simha BN
Date: Thu Apr 21 2016 - 02:27:50 EST


Provide a small convenience wrapper that transmits
a set_tear_scanline command.

Cc: Archit Taneja <archit.taneja@xxxxxxxxx>
Cc: John Stultz <john.stultz@xxxxxxxxxx>
[thierry.reding: suggested to create helper function (v1)]
Cc: Thierry Reding <thierry.reding@xxxxxxxxx>
[sumit.semwal: create a single patch for compilation fix (v2)]
Cc: Sumit Semwal <sumit.semwal@xxxxxxxxxx>
[vinay simha bn: subject line changed (v3)]
Signed-off-by: Vinay Simha BN <simhavcs@xxxxxxxxx>
---
drivers/gpu/drm/drm_mipi_dsi.c | 23 +++++++++++++++++++++++
include/drm/drm_mipi_dsi.h | 2 ++
2 files changed, 25 insertions(+)

diff --git a/drivers/gpu/drm/drm_mipi_dsi.c b/drivers/gpu/drm/drm_mipi_dsi.c
index f5d8083..2f0b85c 100644
--- a/drivers/gpu/drm/drm_mipi_dsi.c
+++ b/drivers/gpu/drm/drm_mipi_dsi.c
@@ -983,6 +983,29 @@ int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi,
EXPORT_SYMBOL(mipi_dsi_dcs_set_tear_on);

/**
+ * mipi_dsi_set_tear_scanline() - turn on the display module's Tearing Effect
+ * output signal on the TE signal line when display module reaches line N
+ * defined by STS[n:0].
+ * @dsi: DSI peripheral device
+ * @param1: STS[10:8]
+ * @param2: STS[7:0]
+ * Return: 0 on success or a negative error code on failure
+ */
+int mipi_dsi_set_tear_scanline(struct mipi_dsi_device *dsi,
+ u8 param1, u8 param2)
+{
+ u8 payload[3] = { MIPI_DCS_SET_TEAR_SCANLINE, param1, param2};
+ ssize_t err;
+
+ err = mipi_dsi_generic_write(dsi, &payload, sizeof(payload));
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_set_tear_scanline);
+
+/**
* mipi_dsi_dcs_set_pixel_format() - sets the pixel format for the RGB image
* data used by the interface
* @dsi: DSI peripheral device
diff --git a/include/drm/drm_mipi_dsi.h b/include/drm/drm_mipi_dsi.h
index 7a9840f..2788dbe 100644
--- a/include/drm/drm_mipi_dsi.h
+++ b/include/drm/drm_mipi_dsi.h
@@ -263,6 +263,8 @@ int mipi_dsi_dcs_set_column_address(struct mipi_dsi_device *dsi, u16 start,
u16 end);
int mipi_dsi_dcs_set_page_address(struct mipi_dsi_device *dsi, u16 start,
u16 end);
+int mipi_dsi_set_tear_scanline(struct mipi_dsi_device *dsi, u8 param1,
+ u8 param2);
int mipi_dsi_dcs_set_tear_off(struct mipi_dsi_device *dsi);
int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi,
enum mipi_dsi_dcs_tear_mode mode);
--
2.1.2