Re: [PATCH] i2c: exynos5: Fix possible ABBA deadlock by keeping I2C clock prepared

From: Javier Martinez Canillas
Date: Mon Apr 18 2016 - 09:29:44 EST


Hello Marek,

On 04/18/2016 03:50 AM, Marek Szyprowski wrote:
> Hello,
>
> On 2016-04-16 00:04, Javier Martinez Canillas wrote:
>> The exynos5 I2C controller driver always prepares and enables a clock
>> before using it and then disables unprepares it when the clock is not
>> used anymore.
>>
>> But this can cause a possible ABBA deadlock in some scenarios since a
>> driver that uses regmap to access its I2C registers, will first grab
>> the regmap lock and then the I2C xfer function will grab the prepare
>> lock when preparing the I2C clock. But since the clock driver also
>> uses regmap for I2C accesses, preparing a clock will first grab the
>> prepare lock and then the regmap lock when using the regmap API.
>>
>> An example of this happens on the Exynos5422 Odroid XU board where a
>> s2mps11 PMIC is used and both the s2mps11 regulators and clk drivers
>> share the same I2C regmap.
>>
>> The possible deadlock is reported by the kernel lockdep:
>>
>> Possible unsafe locking scenario:
>>
>> CPU0 CPU1
>> ---- ----
>> lock(sec_core:428:(regmap)->lock);
>> lock(prepare_lock);
>> lock(sec_core:428:(regmap)->lock);
>> lock(prepare_lock);
>>
>> *** DEADLOCK ***
>>
>> Fix this by only preparing the clock on probe and {en,dis}able in the
>> rest of the driver.
>>
>> This patch is similar to commit 34e81ad5f0b6 ("i2c: s3c2410: fix ABBA
>> deadlock by keeping clock prepared") that fixes the same bug in other
>> driver for an I2C controller found in Samsung SoCs.
>
> I'm sorry, but this is not the right approach imho. It is just a workaround
> applied to specific driver, it also duplicates incorrect clock usage
> pattern (there is really no point keeping clock prepared all the time).
>
> IMHO this ABBA deadlock should be really fixed in clocks core (probably
> by removing global prepare mutex and replacing it with per clock
> controller mutexes). Without a proper patch this issue will hit us again
> with other i2c controllers or other drivers as well.
>

Agreed, Krzysztof mentioned the same before. I'll take a look to the global
mutex to see how I can make it more fine grained to prevent these deadlocks.

>> Reported-by: Anand Moon <linux.amoon@xxxxxxxxx>
>> Signed-off-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
>>

Best regards,
--
Javier Martinez Canillas
Open Source Group
Samsung Research America