Re: [PATCH 12/12] mtd: mtd: drop NAND_ECC_SOFT_BCH enum value

From: Boris Brezillon
Date: Sun Apr 17 2016 - 13:05:54 EST


On Fri, 15 Apr 2016 21:54:12 +0200
RafaÅ MiÅecki <zajec5@xxxxxxxxx> wrote:

> This value should not be part of nand_ecc_modes_t as it specifies
> algorithm not a mode. We successfully managed to introduce new "algo"
> field which is respected now.
>
> Signed-off-by: RafaÅ MiÅecki <zajec5@xxxxxxxxx>
> ---
> drivers/mtd/nand/fsmc_nand.c | 3 +--
> drivers/mtd/nand/jz4780_nand.c | 1 -
> drivers/mtd/nand/nand_base.c | 2 --
> drivers/mtd/nand/nandsim.c | 2 +-
> drivers/mtd/nand/sunxi_nand.c | 2 --
> include/linux/mtd/nand.h | 1 -
> 6 files changed, 2 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c
> index 0f8c63f..d4f454a 100644
> --- a/drivers/mtd/nand/fsmc_nand.c
> +++ b/drivers/mtd/nand/fsmc_nand.c
> @@ -959,7 +959,6 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
> break;
>
> case NAND_ECC_SOFT:
> - case NAND_ECC_SOFT_BCH:
> if (nand->ecc.algo == NAND_ECC_BCH) {
> dev_info(&pdev->dev, "Using 4-bit SW BCH ECC scheme\n");
> break;
> @@ -974,7 +973,7 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
> * Don't set layout for BCH4 SW ECC. This will be
> * generated later in nand_bch_init() later.
> */
> - if (nand->ecc.mode != NAND_ECC_SOFT_BCH) {
> + if (nand->ecc.mode == NAND_ECC_HW) {

This test is wrong, it should be

if (nand->ecc.mode != NAND_ECC_SOFT ||
nand->ecc.algo != NAND_ECC_BCH)

or
if (!(nand->ecc.mode == NAND_ECC_SOFT &&
nand->ecc.algo == NAND_ECC_BCH)

> switch (mtd->oobsize) {
> case 16:
> case 64:
> diff --git a/drivers/mtd/nand/jz4780_nand.c b/drivers/mtd/nand/jz4780_nand.c
> index 10f249a..daf3c42 100644
> --- a/drivers/mtd/nand/jz4780_nand.c
> +++ b/drivers/mtd/nand/jz4780_nand.c
> @@ -179,7 +179,6 @@ static int jz4780_nand_init_ecc(struct jz4780_nand_chip *nand, struct device *de
> chip->ecc.correct = jz4780_nand_ecc_correct;
> /* fall through */
> case NAND_ECC_SOFT:
> - case NAND_ECC_SOFT_BCH:
> dev_info(dev, "using %s (strength %d, size %d, bytes %d)\n",
> (nfc->bch) ? "hardware BCH" : "software ECC",
> chip->ecc.strength, chip->ecc.size, chip->ecc.bytes);
> diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
> index ffd1b32..186d5b5 100644
> --- a/drivers/mtd/nand/nand_base.c
> +++ b/drivers/mtd/nand/nand_base.c
> @@ -4248,7 +4248,6 @@ int nand_scan_tail(struct mtd_info *mtd)
> ecc->algo = NAND_ECC_HAMMING;
>
> case NAND_ECC_SOFT:
> - case NAND_ECC_SOFT_BCH:
> switch (ecc->algo) {
> case NAND_ECC_HAMMING:
> ecc->calculate = nand_calculate_ecc;
> @@ -4386,7 +4385,6 @@ int nand_scan_tail(struct mtd_info *mtd)
> /* Large page NAND with SOFT_ECC should support subpage reads */
> switch (ecc->mode) {
> case NAND_ECC_SOFT:
> - case NAND_ECC_SOFT_BCH:
> if (chip->page_shift > 9)
> chip->options |= NAND_SUBPAGE_READ;
> break;
> diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
> index 6ff1d8d..b0074c2 100644
> --- a/drivers/mtd/nand/nandsim.c
> +++ b/drivers/mtd/nand/nandsim.c
> @@ -2339,7 +2339,7 @@ static int __init ns_init_module(void)
> retval = -EINVAL;
> goto error;
> }
> - chip->ecc.mode = NAND_ECC_SOFT_BCH;
> + chip->ecc.mode = NAND_ECC_SOFT;
> chip->ecc.algo = NAND_ECC_BCH;
> chip->ecc.size = 512;
> chip->ecc.strength = bch;
> diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c
> index 1baf8983..a83a690 100644
> --- a/drivers/mtd/nand/sunxi_nand.c
> +++ b/drivers/mtd/nand/sunxi_nand.c
> @@ -1612,8 +1612,6 @@ static int sunxi_nand_ecc_init(struct mtd_info *mtd, struct nand_ecc_ctrl *ecc,
> return -EINVAL;
>
> switch (ecc->mode) {
> - case NAND_ECC_SOFT_BCH:
> - break;
> case NAND_ECC_HW:
> ret = sunxi_nand_hw_ecc_ctrl_init(mtd, ecc, np);
> if (ret)
> diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
> index e851839..fbe8e16 100644
> --- a/include/linux/mtd/nand.h
> +++ b/include/linux/mtd/nand.h
> @@ -116,7 +116,6 @@ typedef enum {
> NAND_ECC_HW,
> NAND_ECC_HW_SYNDROME,
> NAND_ECC_HW_OOB_FIRST,
> - NAND_ECC_SOFT_BCH,
> } nand_ecc_modes_t;
>
> enum nand_ecc_algo {



--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com