Re: [PATCH] i.MX6 PCIe: Fix imx6_pcie_deassert_core_reset() polarity

From: Marc Zyngier
Date: Tue Mar 29 2016 - 13:56:48 EST


On 29/03/16 16:24, Arnd Bergmann wrote:
> On Tuesday 29 March 2016 08:10:08 Tim Harvey wrote:
>> Arnd,
>>
>> Right, on the IMX the MSI interrupt is GIC-120 which is also the
>> legacy INTD and I do see that if I happen to put a radio in a slot
>> where due to swizzling its pin1 becomes INTD (GIC-120) the interrupt
>> does fire and the device works. Any other slot using GIC-123 (INTA),
>> GIC-122 (INTB), or GIC-121 (INTC) never fires so its very possible
>> that something in the designware core is masking out the legacy irqs.
>
> Interesting. I was actually expecting the opposite here, having the
> IRQs only work if they are not IntD.
>
>
>> I typically advise our users to 'not' enable MSI because
>> architecturally you can spread 4 distinct legacy irq's across CPU's
>> better than a single shared irq.
>
> That is a very good point, I never understood why we want to enable
> MSI support on any PCI host bridge that just forwards all MSIs
> to a single IRQ line. Originally MSI was meant as a performance
> feature, but there is nothing in this setup that makes things go
> faster, and several things that make it go slower.

Feature-ticking exercise.

"We support MSI", never mind if that negating the benefits of the
mechanism and ending up with disastrous impacts on interrupt affinity,
and a set of open questions regarding the effect of the MSI as a DMA fence.

/me stops ranting for the day...

M.
--
Jazz is not dead. It just smells funny...