On Wed 23 Mar 12:46 PDT 2016, Srinivas Kandagatla wrote:
Hi Andy,
This patchset adds support to Dragonboard 600c which is based on APQ8064.
With this patchset, except spi I was able to test all the below features
on this board on top of linus master branch.
1> i2c
2> spi
3> sd/mmc with card detect
4> eMMC
5> USB
6> SATA
7> on board Ethernet based on PCIE.
8> user and activity leds.
AHCI SATA is broken on APQ8064 on mainline, due to changes in libahci, fix is
being discussed which should not effect this dt patches anyway.
This patchset also has a fix to i2c/spi pinctrls which was not set correctly
in my previous apq8064 patches, I have verified this patchset with eeprom and
sensors on the board, you might want to take that patch in next rc.
Thanks,
srini
Srinivas Kandagatla (12):
ARM: dts: apq8064: fix the pinctrls for i2c and spi
ARM: dts: apq8064: add support to gsbi1 uart
ARM: dts: apq8064: add gsbi7 i2c support
ARM: dts: dragonboard-600c: add board support with serial
ARM: dts: dragonboard-600c: add pmic regulator supplies
ARM: dts: dragonboard-600c: Add eMMC and SD card support
ARM: dts: dragonboard-600c: add usb support
ARM: dts: dragonboard-600c: add pcie support
ARM: dts: dragonboard-600c: add on board sata support.
ARM: dts: dragonboard-600c: Add on board leds support
ARM: dts: dragonboard-600c: add i2c support
ARM: dts: dragonboard-600c: add spi support
Please abbreviate db600c (and drop those upper case As).
Ok, makes sense.
arch/arm/boot/dts/Makefile | 1 +
.../arm/boot/dts/qcom-apq8064-dragonboard-600c.dts | 377 +++++++++++++++++++++
Please make this qcom-apq8064-arrow-db600c.dts
arch/arm/boot/dts/qcom-apq8064-pins.dtsi | 39 +++
arch/arm/boot/dts/qcom-apq8064.dtsi | 41 ++-
4 files changed, 452 insertions(+), 6 deletions(-)
create mode 100644 arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts
Regards,
Bjorn