[PATCH v3 2/2] dmaengine: vdma: Fix race condition in Non-SG mode

From: Kedareswara rao Appana
Date: Fri Mar 25 2016 - 05:16:51 EST


When VDMA is configured in Non-sg mode
Users can queue descriptors greater than h/w configured frames.

Current driver allows the user to queue descriptors upto h/w configured.
Which is wrong for non-sg mode configuration.

This patch fixes this issue.

Signed-off-by: Kedareswara rao Appana <appanad@xxxxxxxxxx>
---
Changes for v3:
---> New patch.

drivers/dma/xilinx/xilinx_vdma.c | 25 +++++++++++++++++++------
1 file changed, 19 insertions(+), 6 deletions(-)

diff --git a/drivers/dma/xilinx/xilinx_vdma.c b/drivers/dma/xilinx/xilinx_vdma.c
index abe915c..b873d98 100644
--- a/drivers/dma/xilinx/xilinx_vdma.c
+++ b/drivers/dma/xilinx/xilinx_vdma.c
@@ -209,6 +209,7 @@ struct xilinx_vdma_tx_descriptor {
* @flush_on_fsync: Flush on Frame sync
* @desc_pendingcount: Descriptor pending count
* @ext_addr: Indicates 64 bit addressing is supported by dma channel
+ * @desc_submitcount: Descriptor h/w submitted count
*/
struct xilinx_vdma_chan {
struct xilinx_vdma_device *xdev;
@@ -233,6 +234,7 @@ struct xilinx_vdma_chan {
bool flush_on_fsync;
u32 desc_pendingcount;
bool ext_addr;
+ u32 desc_submitcount;
};

/**
@@ -716,9 +718,10 @@ static void xilinx_vdma_start_transfer(struct xilinx_vdma_chan *chan)
struct xilinx_vdma_tx_segment *segment, *last = NULL;
int i = 0;

- list_for_each_entry(desc, &chan->pending_list, node) {
- segment = list_first_entry(&desc->segments,
- struct xilinx_vdma_tx_segment, node);
+ if (chan->desc_submitcount < chan->num_frms)
+ i = chan->desc_submitcount;
+
+ list_for_each_entry(segment, &desc->segments, node) {
if (chan->ext_addr)
vdma_desc_write_64(chan,
XILINX_VDMA_REG_START_ADDRESS_64(i++),
@@ -742,8 +745,17 @@ static void xilinx_vdma_start_transfer(struct xilinx_vdma_chan *chan)
vdma_desc_write(chan, XILINX_VDMA_REG_VSIZE, last->hw.vsize);
}

- list_splice_tail_init(&chan->pending_list, &chan->active_list);
- chan->desc_pendingcount = 0;
+ if (!chan->has_sg) {
+ list_del(&desc->node);
+ list_add_tail(&desc->node, &chan->active_list);
+ chan->desc_submitcount++;
+ chan->desc_pendingcount--;
+ if (chan->desc_submitcount == chan->num_frms)
+ chan->desc_submitcount = 0;
+ } else {
+ list_splice_tail_init(&chan->pending_list, &chan->active_list);
+ chan->desc_pendingcount = 0;
+ }
}

/**
@@ -927,7 +939,8 @@ append:
list_add_tail(&desc->node, &chan->pending_list);
chan->desc_pendingcount++;

- if (unlikely(chan->desc_pendingcount > chan->num_frms)) {
+ if (chan->has_sg &&
+ unlikely(chan->desc_pendingcount > chan->num_frms)) {
dev_dbg(chan->dev, "desc pendingcount is too high\n");
chan->desc_pendingcount = chan->num_frms;
}
--
2.1.2