[PATCH 18/30] ACPICA: Utilities: Update for strtoul64 merger
From: Lv Zheng
Date: Wed Mar 23 2016 - 21:40:45 EST
From: Bob Moore <robert.moore@xxxxxxxxx>
ACPICA commit 795e136d2ac77c1c8b091fba019b5fe36a44a323
Fixes a problem with the merger of the two internal versions
of this function. Make the maximum integer width (32-bit or
64-bit) a parameter to the function so that it no longer
exclusively uses the integer width specified in the DSDT/SSDT.
ACPICA BZ 1260
Link: https://github.com/acpica/acpica/commit/795e136d
Signed-off-by: Bob Moore <robert.moore@xxxxxxxxx>
Signed-off-by: Lv Zheng <lv.zheng@xxxxxxxxx>
---
drivers/acpi/acpica/acutils.h | 9 +++-
drivers/acpi/acpica/dbconvert.c | 4 +-
drivers/acpi/acpica/exconvrt.c | 4 +-
drivers/acpi/acpica/nsconvert.c | 3 +-
drivers/acpi/acpica/utnonansi.c | 67 +++++++++++++++++-------------
tools/power/acpi/tools/acpidump/apdump.c | 3 +-
tools/power/acpi/tools/acpidump/apmain.c | 3 +-
7 files changed, 57 insertions(+), 36 deletions(-)
diff --git a/drivers/acpi/acpica/acutils.h b/drivers/acpi/acpica/acutils.h
index e43ab6f..7422ff7 100644
--- a/drivers/acpi/acpica/acutils.h
+++ b/drivers/acpi/acpica/acutils.h
@@ -175,7 +175,14 @@ void acpi_ut_strlwr(char *src_string);
int acpi_ut_stricmp(char *string1, char *string2);
-acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 *ret_integer);
+acpi_status
+acpi_ut_strtoul64(char *string,
+ u32 base, u32 max_integer_byte_width, u64 *ret_integer);
+
+/* Values for max_integer_byte_width above */
+
+#define ACPI_MAX32_BYTE_WIDTH 4
+#define ACPI_MAX64_BYTE_WIDTH 8
/*
* utglobal - Global data structures and procedures
diff --git a/drivers/acpi/acpica/dbconvert.c b/drivers/acpi/acpica/dbconvert.c
index 68f4e0f4..c79c5fb 100644
--- a/drivers/acpi/acpica/dbconvert.c
+++ b/drivers/acpi/acpica/dbconvert.c
@@ -277,7 +277,9 @@ acpi_db_convert_to_object(acpi_object_type type,
default:
object->type = ACPI_TYPE_INTEGER;
- status = acpi_ut_strtoul64(string, 16, &object->integer.value);
+ status =
+ acpi_ut_strtoul64(string, 16, acpi_gbl_integer_byte_width,
+ &object->integer.value);
break;
}
diff --git a/drivers/acpi/acpica/exconvrt.c b/drivers/acpi/acpica/exconvrt.c
index 0b9f2c1..d0d16da 100644
--- a/drivers/acpi/acpica/exconvrt.c
+++ b/drivers/acpi/acpica/exconvrt.c
@@ -124,7 +124,9 @@ acpi_ex_convert_to_integer(union acpi_operand_object *obj_desc,
* of ACPI 3.0) is that the to_integer() operator allows both decimal
* and hexadecimal strings (hex prefixed with "0x").
*/
- status = acpi_ut_strtoul64((char *)pointer, flags, &result);
+ status = acpi_ut_strtoul64((char *)pointer, flags,
+ acpi_gbl_integer_byte_width,
+ &result);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
diff --git a/drivers/acpi/acpica/nsconvert.c b/drivers/acpi/acpica/nsconvert.c
index 878e8fb..256f56c 100644
--- a/drivers/acpi/acpica/nsconvert.c
+++ b/drivers/acpi/acpica/nsconvert.c
@@ -79,7 +79,8 @@ acpi_ns_convert_to_integer(union acpi_operand_object *original_object,
/* String-to-Integer conversion */
status = acpi_ut_strtoul64(original_object->string.pointer,
- ACPI_ANY_BASE, &value);
+ ACPI_ANY_BASE,
+ acpi_gbl_integer_byte_width, &value);
if (ACPI_FAILURE(status)) {
return (status);
}
diff --git a/drivers/acpi/acpica/utnonansi.c b/drivers/acpi/acpica/utnonansi.c
index d5c3adf..3465fe2 100644
--- a/drivers/acpi/acpica/utnonansi.c
+++ b/drivers/acpi/acpica/utnonansi.c
@@ -205,37 +205,41 @@ acpi_ut_safe_strncat(char *dest,
*
* FUNCTION: acpi_ut_strtoul64
*
- * PARAMETERS: string - Null terminated string
- * base - Radix of the string: 16 or ACPI_ANY_BASE;
- * ACPI_ANY_BASE means 'in behalf of to_integer'
- * ret_integer - Where the converted integer is returned
+ * PARAMETERS: string - Null terminated string
+ * base - Radix of the string: 16 or 10 or
+ * ACPI_ANY_BASE
+ * max_integer_byte_width - Maximum allowable integer,in bytes:
+ * 4 or 8 (32 or 64 bits)
+ * ret_integer - Where the converted integer is
+ * returned
*
* RETURN: Status and Converted value
*
* DESCRIPTION: Convert a string into an unsigned value. Performs either a
- * 32-bit or 64-bit conversion, depending on the current mode
- * of the interpreter.
+ * 32-bit or 64-bit conversion, depending on the input integer
+ * size (often the current mode of the interpreter).
*
- * NOTES: acpi_gbl_integer_byte_width should be set to the proper width.
+ * NOTES: Negative numbers are not supported, as they are not supported
+ * by ACPI.
+ *
+ * acpi_gbl_integer_byte_width should be set to the proper width.
* For the core ACPICA code, this width depends on the DSDT
- * version. For iASL, the default byte width is always 8.
+ * version. For iASL, the default byte width is always 8 for the
+ * parser, but error checking is performed later to flag cases
+ * where a 64-bit constant is defined in a 32-bit DSDT/SSDT.
*
* Does not support Octal strings, not needed at this time.
*
- * There is an earlier version of the function after this one,
- * below. It is slightly different than this one, and the two
- * may eventually may need to be merged. (01/2016).
- *
******************************************************************************/
-acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 *ret_integer)
+acpi_status
+acpi_ut_strtoul64(char *string,
+ u32 base, u32 max_integer_byte_width, u64 *ret_integer)
{
u32 this_digit = 0;
u64 return_value = 0;
u64 quotient;
u64 dividend;
- u32 to_integer_op = (base == ACPI_ANY_BASE);
- u32 mode32 = (acpi_gbl_integer_byte_width == 4);
u8 valid_digits = 0;
u8 sign_of0x = 0;
u8 term = 0;
@@ -244,6 +248,7 @@ acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 *ret_integer)
switch (base) {
case ACPI_ANY_BASE:
+ case 10:
case 16:
break;
@@ -265,9 +270,9 @@ acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 *ret_integer)
string++;
}
- if (to_integer_op) {
+ if (base == ACPI_ANY_BASE) {
/*
- * Base equal to ACPI_ANY_BASE means 'ToInteger operation case'.
+ * Base equal to ACPI_ANY_BASE means 'Either decimal or hex'.
* We need to determine if it is decimal or hexadecimal.
*/
if ((*string == '0') && (tolower((int)*(string + 1)) == 'x')) {
@@ -284,7 +289,7 @@ acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 *ret_integer)
/* Any string left? Check that '0x' is not followed by white space. */
if (!(*string) || isspace((int)*string) || *string == '\t') {
- if (to_integer_op) {
+ if (base == ACPI_ANY_BASE) {
goto error_exit;
} else {
goto all_done;
@@ -292,10 +297,11 @@ acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 *ret_integer)
}
/*
- * Perform a 32-bit or 64-bit conversion, depending upon the current
- * execution mode of the interpreter
+ * Perform a 32-bit or 64-bit conversion, depending upon the input
+ * byte width
*/
- dividend = (mode32) ? ACPI_UINT32_MAX : ACPI_UINT64_MAX;
+ dividend = (max_integer_byte_width <= ACPI_MAX32_BYTE_WIDTH) ?
+ ACPI_UINT32_MAX : ACPI_UINT64_MAX;
/* Main loop: convert the string to a 32- or 64-bit integer */
@@ -323,7 +329,7 @@ acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 *ret_integer)
}
if (term) {
- if (to_integer_op) {
+ if (base == ACPI_ANY_BASE) {
goto error_exit;
} else {
break;
@@ -338,12 +344,13 @@ acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 *ret_integer)
valid_digits++;
- if (sign_of0x
- && ((valid_digits > 16)
- || ((valid_digits > 8) && mode32))) {
+ if (sign_of0x && ((valid_digits > 16) ||
+ ((valid_digits > 8)
+ && (max_integer_byte_width <=
+ ACPI_MAX32_BYTE_WIDTH)))) {
/*
* This is to_integer operation case.
- * No any restrictions for string-to-integer conversion,
+ * No restrictions for string-to-integer conversion,
* see ACPI spec.
*/
goto error_exit;
@@ -355,7 +362,7 @@ acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 *ret_integer)
"ient, NULL);
if (return_value > quotient) {
- if (to_integer_op) {
+ if (base == ACPI_ANY_BASE) {
goto error_exit;
} else {
break;
@@ -378,7 +385,8 @@ all_done:
return_ACPI_STATUS(AE_OK);
error_exit:
- /* Base was set/validated above */
+
+ /* Base was set/validated above (10 or 16) */
if (base == 10) {
return_ACPI_STATUS(AE_BAD_DECIMAL_CONSTANT);
@@ -388,8 +396,7 @@ error_exit:
}
#ifdef _OBSOLETE_FUNCTIONS
-/* TBD: use version in ACPICA main code base? */
-/* DONE: 01/2016 */
+/* Removed: 01/2016 */
/*******************************************************************************
*
diff --git a/tools/power/acpi/tools/acpidump/apdump.c b/tools/power/acpi/tools/acpidump/apdump.c
index da44458..9c2db0e 100644
--- a/tools/power/acpi/tools/acpidump/apdump.c
+++ b/tools/power/acpi/tools/acpidump/apdump.c
@@ -286,7 +286,8 @@ int ap_dump_table_by_address(char *ascii_address)
/* Convert argument to an integer physical address */
- status = acpi_ut_strtoul64(ascii_address, 0, &long_address);
+ status = acpi_ut_strtoul64(ascii_address, ACPI_ANY_BASE,
+ ACPI_MAX64_BYTE_WIDTH, &long_address);
if (ACPI_FAILURE(status)) {
acpi_log_error("%s: Could not convert to a physical address\n",
ascii_address);
diff --git a/tools/power/acpi/tools/acpidump/apmain.c b/tools/power/acpi/tools/acpidump/apmain.c
index c3c0915..7692e6b 100644
--- a/tools/power/acpi/tools/acpidump/apmain.c
+++ b/tools/power/acpi/tools/acpidump/apmain.c
@@ -209,7 +209,8 @@ static int ap_do_options(int argc, char **argv)
case 'r': /* Dump tables from specified RSDP */
status =
- acpi_ut_strtoul64(acpi_gbl_optarg, 0,
+ acpi_ut_strtoul64(acpi_gbl_optarg, ACPI_ANY_BASE,
+ ACPI_MAX64_BYTE_WIDTH,
&gbl_rsdp_base);
if (ACPI_FAILURE(status)) {
acpi_log_error
--
1.7.10