[PATCH 04/12] ARM: dts: dragonboard-600c: add board support with serial

From: Srinivas Kandagatla
Date: Wed Mar 23 2016 - 15:47:33 EST


This patch adds support to DragonBoard600 with basic serial ports.
DragonBoard600 is based on APQ8064.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
arch/arm/boot/dts/Makefile | 1 +
.../arm/boot/dts/qcom-apq8064-dragonboard-600c.dts | 36 ++++++++++++++++++++++
2 files changed, 37 insertions(+)
create mode 100644 arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 52b34a0..265941a4 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -532,6 +532,7 @@ dtb-$(CONFIG_ARCH_PRIMA2) += \
prima2-evb.dtb
dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8064-cm-qs600.dtb \
+ qcom-apq8064-dragonboard-600c.dtb \
qcom-apq8064-ifc6410.dtb \
qcom-apq8064-sony-xperia-yuga.dtb \
qcom-apq8064-asus-nexus7-flo.dtb \
diff --git a/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts b/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts
new file mode 100644
index 0000000..e96aab6
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts
@@ -0,0 +1,36 @@
+#include "qcom-apq8064-v2.0.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. APQ8064 DragonBoard600c";
+ compatible = "qcom,apq8064-dragonboard600c", "qcom,apq8064";
+
+ aliases {
+ serial0 = &gsbi7_serial;
+ serial1 = &gsbi1_serial;
+ };
+
+ soc {
+ gsbi@12440000 {
+ status = "okay";
+ qcom,mode = <GSBI_PROT_UART_W_FC>;
+ serial@12450000 {
+ label = "LS-UART1";
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gsbi1_uart_4pins>;
+ };
+ };
+
+ /* DEBUG UART */
+ gsbi@16600000 {
+ status = "okay";
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ serial@16640000 {
+ label = "LS-UART0";
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gsbi7_uart_2pins>;
+ };
+ };
+ };
+};
--
2.5.0