[PATCH 5/5] pwm: pwm-tiehrpwm: Update dt binding document to use generic node name

[Franklin S Cooper Jr]

Now that the node name has been changed from ehrpwm to pwm the document
should show this proper usage. Also change the unit address in the example
from 0 to the proper physical address value that should be used.

Signed-off-by: Franklin S Cooper Jr <fcooper@xxxxxx>
---
 Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
index 9c100b2..20211ed 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
@@ -15,14 +15,14 @@ Optional properties:
 
 Example:
 
-ehrpwm0: ehrpwm@0 { /* EHRPWM on am33xx */
+ehrpwm0: pwm@48300200 { /* EHRPWM on am33xx */
 	compatible = "ti,am33xx-ehrpwm";
 	#pwm-cells = <3>;
 	reg = <0x48300200 0x100>;
 	ti,hwmods = "ehrpwm0";
 };
 
-ehrpwm0: ehrpwm@0 { /* EHRPWM on da850 */
+ehrpwm0: pwm@01f00000 { /* EHRPWM on da850 */
 	compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
 	#pwm-cells = <3>;
 	reg = <0x300000 0x2000>;
-- 
2.7.0