[PATCH v4 net-next 1/9] ARM: dts: armada-38x: add buffer manager nodes

From: Gregory CLEMENT
Date: Sat Mar 05 2016 - 17:41:09 EST


From: Marcin Wojtas <mw@xxxxxxxxxxxx>

Armada 38x network controller supports hardware buffer management (BM).
Since it is now enabled in mvneta driver, appropriate nodes can be added
to armada-38x.dtsi - for the actual common BM unit (bm@c8000) and its
internal SRAM (bm-bppi), which is used for indirect access to buffer
pointer ring residing in DRAM.

Pools - ports mapping, bm-bppi entry in 'soc' node's ranges and optional
parameters are supposed to be set in board files.

Signed-off-by: Marcin Wojtas <mw@xxxxxxxxxxxx>
Signed-off-by: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/armada-38x.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)

diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index e8b7f6726772..1b7d690d8e10 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -540,6 +540,14 @@
status = "disabled";
};

+ bm: bm@c8000 {
+ compatible = "marvell,armada-380-neta-bm";
+ reg = <0xc8000 0xac>;
+ clocks = <&gateclk 13>;
+ internal-mem = <&bm_bppi>;
+ status = "disabled";
+ };
+
sata@e0000 {
compatible = "marvell,armada-380-ahci";
reg = <0xe0000 0x2000>;
@@ -618,6 +626,16 @@
#size-cells = <1>;
ranges = <0 MBUS_ID(0x09, 0x15) 0 0x800>;
};
+
+ bm_bppi: bm-bppi {
+ compatible = "mmio-sram";
+ reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>;
+ ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&gateclk 13>;
+ status = "disabled";
+ };
};

clocks {
--
2.5.0