[PATCH 4/4] leds: Replace dedicated SN3218 driver with IS31FL32XX driver
From: David Rivshin (Allworx)
Date: Wed Mar 02 2016 - 22:03:14 EST
From: David Rivshin <drivshin@xxxxxxxxxxx>
Si-En Technology was acquired by ISSI in 2011, and it appears that
the IS31FL3218/IS31FL3216 are just rebranded SN3218/SN3216 devices.
As the IS31FL32XX driver already handles the *3218 devices, there
is no longer a need for the dedicated SN3218 driver.
Add the "sn,sn3218" and "sn,sn3216" compatible strings into the
IS31FL32XX driver and binding documentation, and remove the
leds-sn3218 driver.
Datasheets:
IS31FL3218: http://www.issi.com/WW/pdf/31FL3218.pdf
SN3218: http://www.si-en.com/uploadpdf/s2011517171720.pdf
IS31FL3216: http://www.issi.com/WW/pdf/31FL3216.pdf
SN3216; http://www.si-en.com/uploadpdf/SN3216201152410148.pdf
Signed-off-by: David Rivshin <drivshin@xxxxxxxxxxx>
---
Note that the leds-sn3218 binding use a 0-based 'reg' property, while
the leds-is31fl32xx binding uses a 1-based 'reg' property. This seemed
to be the preferred binding based on [1]. Since leds-sn3216 has not been
in a released kernel, there is are no backwards-compatibility concerns.
Changes from RFC:
new
[1] http://www.spinics.net/lists/linux-leds/msg05589.html
.../devicetree/bindings/leds/leds-is31fl32xx.txt | 9 +-
.../devicetree/bindings/leds/leds-sn3218.txt | 41 ---
drivers/leds/Kconfig | 18 +-
drivers/leds/Makefile | 1 -
drivers/leds/leds-is31fl32xx.c | 6 +-
drivers/leds/leds-sn3218.c | 306 ---------------------
6 files changed, 14 insertions(+), 367 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/leds/leds-sn3218.txt
delete mode 100644 drivers/leds/leds-sn3218.c
diff --git a/Documentation/devicetree/bindings/leds/leds-is31fl32xx.txt b/Documentation/devicetree/bindings/leds/leds-is31fl32xx.txt
index 539df2e..c59eb1a 100644
--- a/Documentation/devicetree/bindings/leds/leds-is31fl32xx.txt
+++ b/Documentation/devicetree/bindings/leds/leds-is31fl32xx.txt
@@ -1,6 +1,6 @@
-Binding for ISSI IS31FL32xx LED Drivers
+Binding for ISSI IS31FL32xx and Si-En SN32xx LED Drivers
-The IS31FL32xx family of LED drivers are I2C devices with multiple
+The IS31FL32xx/SN32xx family of LED drivers are I2C devices with multiple
constant-current channels, each with independent 256-level PWM control.
Each LED is represented as a sub-node of the device.
@@ -10,6 +10,8 @@ Required properties:
issi,is31fl3235
issi,is31fl3218
issi,is31fl3216
+ si-en,sn3218
+ si-en,sn3216
- reg: I2C slave address
- address-cells : must be 1
- size-cells : must be 0
@@ -45,5 +47,6 @@ leds: is31fl3236@3c {
};
};
-For more product information please see the link below:
+For more product information please see the links below:
http://www.issi.com/US/product-analog-fxled-driver.shtml
+http://www.si-en.com/product.asp?parentid=890
diff --git a/Documentation/devicetree/bindings/leds/leds-sn3218.txt b/Documentation/devicetree/bindings/leds/leds-sn3218.txt
deleted file mode 100644
index 19cbf57..0000000
--- a/Documentation/devicetree/bindings/leds/leds-sn3218.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-* Si-En Technology - SN3218 18-Channel LED Driver
-
-Required properties:
-- compatible :
- "si-en,sn3218"
-- address-cells : must be 1
-- size-cells : must be 0
-- reg : I2C slave address, typically 0x54
-
-There must be at least 1 LED which is represented as a sub-node
-of the sn3218 device.
-
-LED sub-node properties:
-- label : (optional) see Documentation/devicetree/bindings/leds/common.txt
-- reg : number of LED line (could be from 0 to 17)
-- linux,default-trigger : (optional)
- see Documentation/devicetree/bindings/leds/common.txt
-
-Example:
-
-sn3218: led-controller@54 {
- compatible = "si-en,sn3218";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x54>;
-
- led@0 {
- label = "led1";
- reg = <0x0>;
- };
-
- led@1 {
- label = "led2";
- reg = <0x1>;
- };
-
- led@2 {
- label = "led3";
- reg = <0x2>;
- };
-};
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 9c63ba4..1f64151 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -568,25 +568,13 @@ config LEDS_SEAD3
This driver can also be built as a module. If so the module
will be called leds-sead3.
-config LEDS_SN3218
- tristate "LED support for Si-En SN3218 I2C chip"
- depends on LEDS_CLASS && I2C
- depends on OF
- select REGMAP_I2C
- help
- This option enables support for the Si-EN SN3218 LED driver
- connected through I2C. Say Y to enable support for the SN3218 LED.
-
- This driver can also be built as a module. If so the module
- will be called leds-sn3218.
-
config LEDS_IS31FL32XX
tristate "LED support for ISSI IS31FL32XX I2C LED controller family"
depends on LEDS_CLASS && I2C && OF
help
- Say Y here to include support for ISSI IS31FL32XX LED controllers.
- They are I2C devices with multiple constant-current channels, each
- with independent 256-level PWM control.
+ Say Y here to include support for ISSI IS31FL32XX and Si-En SN32xx
+ LED controllers. They are I2C devices with multiple constant-current
+ channels, each with independent 256-level PWM control.
comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)"
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 3fdf313..cb2013d 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -66,7 +66,6 @@ obj-$(CONFIG_LEDS_MENF21BMC) += leds-menf21bmc.o
obj-$(CONFIG_LEDS_KTD2692) += leds-ktd2692.o
obj-$(CONFIG_LEDS_POWERNV) += leds-powernv.o
obj-$(CONFIG_LEDS_SEAD3) += leds-sead3.o
-obj-$(CONFIG_LEDS_SN3218) += leds-sn3218.o
obj-$(CONFIG_LEDS_IS31FL32XX) += leds-is31fl32xx.o
# LED SPI Drivers
diff --git a/drivers/leds/leds-is31fl32xx.c b/drivers/leds/leds-is31fl32xx.c
index 49818f0..ec3f541 100644
--- a/drivers/leds/leds-is31fl32xx.c
+++ b/drivers/leds/leds-is31fl32xx.c
@@ -10,7 +10,9 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
- * Datasheets: http://www.issi.com/US/product-analog-fxled-driver.shtml
+ * Datasheets:
+ * http://www.issi.com/US/product-analog-fxled-driver.shtml
+ * http://www.si-en.com/product.asp?parentid=890
*/
#include <linux/err.h>
@@ -425,7 +427,9 @@ static const struct of_device_id of_is31fl31xx_match[] = {
{ .compatible = "issi,is31fl3236", .data = &is31fl3236_cdef, },
{ .compatible = "issi,is31fl3235", .data = &is31fl3235_cdef, },
{ .compatible = "issi,is31fl3218", .data = &is31fl3218_cdef, },
+ { .compatible = "si-en,sn3218", .data = &is31fl3218_cdef, },
{ .compatible = "issi,is31fl3216", .data = &is31fl3216_cdef, },
+ { .compatible = "si-en,sn3216", .data = &is31fl3216_cdef, },
{},
};
diff --git a/drivers/leds/leds-sn3218.c b/drivers/leds/leds-sn3218.c
deleted file mode 100644
index dcc2581..0000000
--- a/drivers/leds/leds-sn3218.c
+++ /dev/null
@@ -1,306 +0,0 @@
-/*
- * Si-En SN3218 18 Channel LED Driver
- *
- * Copyright (C) 2016 Stefan Wahren <stefan.wahren@xxxxxxxx>
- *
- * Based on leds-pca963x.c
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * Datasheet: http://www.si-en.com/uploadpdf/s2011517171720.pdf
- *
- */
-
-#include <linux/err.h>
-#include <linux/i2c.h>
-#include <linux/leds.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/regmap.h>
-#include <linux/slab.h>
-
-#define SN3218_MODE 0x00
-#define SN3218_PWM_1 0x01
-#define SN3218_PWM_2 0x02
-#define SN3218_PWM_3 0x03
-#define SN3218_PWM_4 0x04
-#define SN3218_PWM_5 0x05
-#define SN3218_PWM_6 0x06
-#define SN3218_PWM_7 0x07
-#define SN3218_PWM_8 0x08
-#define SN3218_PWM_9 0x09
-#define SN3218_PWM_10 0x0a
-#define SN3218_PWM_11 0x0b
-#define SN3218_PWM_12 0x0c
-#define SN3218_PWM_13 0x0d
-#define SN3218_PWM_14 0x0e
-#define SN3218_PWM_15 0x0f
-#define SN3218_PWM_16 0x10
-#define SN3218_PWM_17 0x11
-#define SN3218_PWM_18 0x12
-#define SN3218_LED_1_6 0x13
-#define SN3218_LED_7_12 0x14
-#define SN3218_LED_13_18 0x15
-#define SN3218_UPDATE 0x16 /* applies to reg 0x01 .. 0x15 */
-#define SN3218_RESET 0x17
-
-#define SN3218_LED_MASK 0x3f
-#define SN3218_LED_ON 0x01
-#define SN3218_LED_OFF 0x00
-
-#define SN3218_MODE_SHUTDOWN 0x00
-#define SN3218_MODE_NORMAL 0x01
-
-#define NUM_LEDS 18
-
-struct sn3218_led;
-
-/**
- * struct sn3218 -
- * @client - Pointer to the I2C client
- * @leds - Pointer to the individual LEDs
- * @num_leds - Actual number of LEDs
-**/
-struct sn3218 {
- struct i2c_client *client;
- struct regmap *regmap;
- struct sn3218_led *leds;
- int num_leds;
-};
-
-/**
- * struct sn3218_led -
- * @chip - Pointer to the container
- * @led_cdev - led class device pointer
- * @led_num - LED index ( 0 .. 17 )
-**/
-struct sn3218_led {
- struct sn3218 *chip;
- struct led_classdev led_cdev;
- int led_num;
-};
-
-static int sn3218_led_set(struct led_classdev *led_cdev,
- enum led_brightness brightness)
-{
- struct sn3218_led *led =
- container_of(led_cdev, struct sn3218_led, led_cdev);
- struct regmap *regmap = led->chip->regmap;
- u8 bank = led->led_num / 6;
- u8 mask = 0x1 << (led->led_num % 6);
- u8 val;
- int ret;
-
- if (brightness == LED_OFF)
- val = 0;
- else
- val = mask;
-
- ret = regmap_update_bits(regmap, SN3218_LED_1_6 + bank, mask, val);
- if (ret < 0)
- return ret;
-
- if (brightness > LED_OFF) {
- ret = regmap_write(regmap, SN3218_PWM_1 + led->led_num,
- brightness);
- if (ret < 0)
- return ret;
- }
-
- ret = regmap_write(regmap, SN3218_UPDATE, 0xff);
-
- return ret;
-}
-
-static void sn3218_led_init(struct sn3218 *sn3218, struct device_node *node,
- u32 reg)
-{
- struct sn3218_led *leds = sn3218->leds;
- struct led_classdev *cdev = &leds[reg].led_cdev;
-
- leds[reg].led_num = reg;
- leds[reg].chip = sn3218;
-
- if (of_property_read_string(node, "label", &cdev->name))
- cdev->name = node->name;
-
- of_property_read_string(node, "linux,default-trigger",
- &cdev->default_trigger);
-
- cdev->brightness_set_blocking = sn3218_led_set;
-}
-
-static const struct reg_default sn3218_reg_defs[] = {
- { SN3218_MODE, 0x00},
- { SN3218_PWM_1, 0x00},
- { SN3218_PWM_2, 0x00},
- { SN3218_PWM_3, 0x00},
- { SN3218_PWM_4, 0x00},
- { SN3218_PWM_5, 0x00},
- { SN3218_PWM_6, 0x00},
- { SN3218_PWM_7, 0x00},
- { SN3218_PWM_8, 0x00},
- { SN3218_PWM_9, 0x00},
- { SN3218_PWM_10, 0x00},
- { SN3218_PWM_11, 0x00},
- { SN3218_PWM_12, 0x00},
- { SN3218_PWM_13, 0x00},
- { SN3218_PWM_14, 0x00},
- { SN3218_PWM_15, 0x00},
- { SN3218_PWM_16, 0x00},
- { SN3218_PWM_17, 0x00},
- { SN3218_PWM_18, 0x00},
- { SN3218_LED_1_6, 0x00},
- { SN3218_LED_7_12, 0x00},
- { SN3218_LED_13_18, 0x00},
- { SN3218_UPDATE, 0x00},
- { SN3218_RESET, 0x00},
-};
-
-static const struct regmap_config sn3218_regmap_config = {
- .reg_bits = 8,
- .val_bits = 8,
-
- .max_register = SN3218_RESET,
- .reg_defaults = sn3218_reg_defs,
- .num_reg_defaults = ARRAY_SIZE(sn3218_reg_defs),
- .cache_type = REGCACHE_RBTREE,
-};
-
-static int sn3218_init(struct i2c_client *client, struct sn3218 *sn3218)
-{
- struct device_node *np = client->dev.of_node, *child;
- struct sn3218_led *leds;
- int ret, count;
-
- count = of_get_child_count(np);
- if (!count)
- return -ENODEV;
-
- if (count > NUM_LEDS) {
- dev_err(&client->dev, "Invalid LED count %d\n", count);
- return -EINVAL;
- }
-
- leds = devm_kzalloc(&client->dev, count * sizeof(*leds), GFP_KERNEL);
- if (!leds)
- return -ENOMEM;
-
- sn3218->leds = leds;
- sn3218->num_leds = count;
- sn3218->client = client;
-
- sn3218->regmap = devm_regmap_init_i2c(client, &sn3218_regmap_config);
- if (IS_ERR(sn3218->regmap)) {
- ret = PTR_ERR(sn3218->regmap);
- dev_err(&client->dev, "Failed to allocate register map: %d\n",
- ret);
- return ret;
- }
-
- for_each_child_of_node(np, child) {
- u32 reg;
-
- ret = of_property_read_u32(child, "reg", ®);
- if (ret)
- goto fail;
-
- if (reg >= count) {
- dev_err(&client->dev, "Invalid LED (%u >= %d)\n", reg,
- count);
- ret = -EINVAL;
- goto fail;
- }
-
- sn3218_led_init(sn3218, child, reg);
- }
-
- return 0;
-
-fail:
- of_node_put(child);
- return ret;
-}
-
-static int sn3218_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
-{
- struct sn3218 *sn3218;
- struct sn3218_led *leds;
- struct device *dev = &client->dev;
- int i, ret;
-
- sn3218 = devm_kzalloc(dev, sizeof(*sn3218), GFP_KERNEL);
- if (!sn3218)
- return -ENOMEM;
-
- ret = sn3218_init(client, sn3218);
- if (ret)
- return ret;
-
- i2c_set_clientdata(client, sn3218);
- leds = sn3218->leds;
-
- /*
- * Since the chip is write-only we need to reset him into
- * a defined state (all LEDs off).
- */
- ret = regmap_write(sn3218->regmap, SN3218_RESET, 0xff);
- if (ret)
- return ret;
-
- for (i = 0; i < sn3218->num_leds; i++) {
- ret = devm_led_classdev_register(dev, &leds[i].led_cdev);
- if (ret < 0)
- return ret;
- }
-
- return regmap_write(sn3218->regmap, SN3218_MODE, SN3218_MODE_NORMAL);
-}
-
-static int sn3218_remove(struct i2c_client *client)
-{
- struct sn3218 *sn3218 = i2c_get_clientdata(client);
-
- regmap_write(sn3218->regmap, SN3218_MODE, SN3218_MODE_SHUTDOWN);
-
- return 0;
-}
-
-static void sn3218_shutdown(struct i2c_client *client)
-{
- struct sn3218 *sn3218 = i2c_get_clientdata(client);
-
- regmap_write(sn3218->regmap, SN3218_MODE, SN3218_MODE_SHUTDOWN);
-}
-
-static const struct i2c_device_id sn3218_id[] = {
- { "sn3218", 0 },
- { }
-};
-MODULE_DEVICE_TABLE(i2c, sn3218_id);
-
-static const struct of_device_id of_sn3218_match[] = {
- { .compatible = "si-en,sn3218", },
- {},
-};
-MODULE_DEVICE_TABLE(of, of_sn3218_match);
-
-static struct i2c_driver sn3218_driver = {
- .driver = {
- .name = "leds-sn3218",
- .of_match_table = of_match_ptr(of_sn3218_match),
- },
- .probe = sn3218_probe,
- .remove = sn3218_remove,
- .shutdown = sn3218_shutdown,
- .id_table = sn3218_id,
-};
-
-module_i2c_driver(sn3218_driver);
-
-MODULE_DESCRIPTION("Si-En SN3218 LED Driver");
-MODULE_AUTHOR("Stefan Wahren <stefan.wahren@xxxxxxxx>");
-MODULE_LICENSE("GPL v2");
--
2.5.0