[PATCH 09/10] staging: rtl8188eu: remove PWR_INTF_*_MSK macro definitions and interface_mask of wl_pwr_cfg structure

From: Ivan Safonov
Date: Wed Mar 02 2016 - 03:08:22 EST


This driver is intended only for usb devices.

Signed-off-by: Ivan Safonov <insafonov@xxxxxxxxx>
---
drivers/staging/rtl8188eu/hal/pwrseqcmd.c | 10 +-
drivers/staging/rtl8188eu/hal/usb_halinit.c | 6 +-
drivers/staging/rtl8188eu/include/pwrseq.h | 139 +++++++++-----------------
drivers/staging/rtl8188eu/include/pwrseqcmd.h | 10 +-
4 files changed, 57 insertions(+), 108 deletions(-)

diff --git a/drivers/staging/rtl8188eu/hal/pwrseqcmd.c b/drivers/staging/rtl8188eu/hal/pwrseqcmd.c
index 7eb1fdb..99d89f9 100644
--- a/drivers/staging/rtl8188eu/hal/pwrseqcmd.c
+++ b/drivers/staging/rtl8188eu/hal/pwrseqcmd.c
@@ -24,7 +24,7 @@
* for RTL8723/RTL8188E Series IC.
*/
u8 rtl88eu_pwrseqcmdparsing(struct adapter *padapter, u8 cut_vers,
- u8 ifacetype, struct wl_pwr_cfg pwrseqcmd[])
+ struct wl_pwr_cfg pwrseqcmd[])
{
struct wl_pwr_cfg pwrcfgcmd = {0};
u8 poll_bit = false;
@@ -39,19 +39,17 @@ u8 rtl88eu_pwrseqcmdparsing(struct adapter *padapter, u8 cut_vers,

RT_TRACE(_module_hal_init_c_, _drv_info_,
("rtl88eu_pwrseqcmdparsing: offset(%#x) cut_msk(%#x)"
- "interface_msk(%#x) base(%#x) cmd(%#x)"
+ " base(%#x) cmd(%#x)"
"msk(%#x) value(%#x)\n",
GET_PWR_CFG_OFFSET(pwrcfgcmd),
GET_PWR_CFG_CUT_MASK(pwrcfgcmd),
- GET_PWR_CFG_INTF_MASK(pwrcfgcmd),
GET_PWR_CFG_BASE(pwrcfgcmd),
GET_PWR_CFG_CMD(pwrcfgcmd),
GET_PWR_CFG_MASK(pwrcfgcmd),
GET_PWR_CFG_VALUE(pwrcfgcmd)));

- /* Only Handle the command whose CUT and Interface are matched */
- if ((GET_PWR_CFG_CUT_MASK(pwrcfgcmd) & cut_vers) &&
- (GET_PWR_CFG_INTF_MASK(pwrcfgcmd) & ifacetype)) {
+ /* Only Handle the command whose CUT is matched */
+ if (GET_PWR_CFG_CUT_MASK(pwrcfgcmd) & cut_vers) {
switch (GET_PWR_CFG_CMD(pwrcfgcmd)) {
case PWR_CMD_READ:
RT_TRACE(_module_hal_init_c_, _drv_info_,
diff --git a/drivers/staging/rtl8188eu/hal/usb_halinit.c b/drivers/staging/rtl8188eu/hal/usb_halinit.c
index 0868635..07a61b8 100644
--- a/drivers/staging/rtl8188eu/hal/usb_halinit.c
+++ b/drivers/staging/rtl8188eu/hal/usb_halinit.c
@@ -107,7 +107,7 @@ static u32 rtl8188eu_InitPowerOn(struct adapter *adapt)
if (haldata->bMacPwrCtrlOn)
return _SUCCESS;

- if (!rtl88eu_pwrseqcmdparsing(adapt, PWR_CUT_ALL_MSK, PWR_INTF_USB_MSK,
+ if (!rtl88eu_pwrseqcmdparsing(adapt, PWR_CUT_ALL_MSK,
Rtl8188E_NIC_PWR_ON_FLOW)) {
DBG_88E(KERN_ERR "%s: run power on flow fail\n", __func__);
return _FAIL;
@@ -924,7 +924,7 @@ static void CardDisableRTL8188EU(struct adapter *Adapter)
usb_write8(Adapter, REG_CR, 0x0);

/* Run LPS WL RFOFF flow */
- rtl88eu_pwrseqcmdparsing(Adapter, PWR_CUT_ALL_MSK, PWR_INTF_USB_MSK,
+ rtl88eu_pwrseqcmdparsing(Adapter, PWR_CUT_ALL_MSK,
Rtl8188E_NIC_LPS_ENTER_FLOW);

/* 2. 0x1F[7:0] = 0 turn off RF */
@@ -946,7 +946,7 @@ static void CardDisableRTL8188EU(struct adapter *Adapter)
usb_write8(Adapter, REG_32K_CTRL, val8&(~BIT(0)));

/* Card disable power action flow */
- rtl88eu_pwrseqcmdparsing(Adapter, PWR_CUT_ALL_MSK, PWR_INTF_USB_MSK,
+ rtl88eu_pwrseqcmdparsing(Adapter, PWR_CUT_ALL_MSK,
Rtl8188E_NIC_DISABLE_FLOW);

/* Reset MCU IO Wrapper */
diff --git a/drivers/staging/rtl8188eu/include/pwrseq.h b/drivers/staging/rtl8188eu/include/pwrseq.h
index bf89d7c..889565e 100644
--- a/drivers/staging/rtl8188eu/include/pwrseq.h
+++ b/drivers/staging/rtl8188eu/include/pwrseq.h
@@ -64,33 +64,30 @@
* },
* comment here
*/ \
- {0x0006, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK, \
+ {0x0006, PWR_CUT_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), BIT(1)}, \
/* wait till 0x04[17] = 1 power ready*/ \
- {0x0002, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK, \
+ {0x0002, PWR_CUT_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0) | BIT(1), 0}, \
/* 0x02[1:0] = 0 reset BB*/ \
- {0x0026, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK, \
+ {0x0026, PWR_CUT_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)}, \
/*0x24[23] = 2b'01 schmit trigger */ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK, \
+ {0x0005, PWR_CUT_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0}, \
/* 0x04[15] = 0 disable HWPDN (control by DRV)*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK, \
+ {0x0005, PWR_CUT_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4) | BIT(3), 0}, \
/*0x04[12:11] = 2b'00 disable WL suspend*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK, \
+ {0x0005, PWR_CUT_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), BIT(0)}, \
/*0x04[8] = 1 polling until return 0*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK, \
+ {0x0005, PWR_CUT_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(0), 0}, \
/*wait till 0x04[8] = 0*/ \
- {0x0023, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK, \
+ {0x0023, PWR_CUT_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, \
- /*LDO normal mode*/ \
- {0x0074, PWR_CUT_ALL_MSK, PWR_INTF_SDIO_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, \
- /*SDIO Driving*/
+ /*LDO normal mode*/

#define RTL8188E_TRANS_ACT_TO_CARDEMU \
/* format
@@ -98,16 +95,16 @@
* },
* comments here
*/ \
- {0x001F, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK, \
+ {0x001F, PWR_CUT_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, \
/*0x1F[7:0] = 0 turn off RF*/ \
- {0x0023, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK, \
+ {0x0023, PWR_CUT_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, \
/*LDO Sleep mode*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK, \
+ {0x0005, PWR_CUT_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)}, \
/*0x04[9] = 1 turn off MAC by HW state machine*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK, \
+ {0x0005, PWR_CUT_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), 0}, \
/*wait till 0x04[9] = 0 polling until return 0 to disable*/

@@ -117,31 +114,18 @@
* value },
* comments here
*/ \
- {0x0005, PWR_CUT_ALL_MSK, \
- PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_BASEADDR_MAC, \
PWR_CMD_WRITE, BIT(3) | BIT(4), BIT(3)}, \
/* 0x04[12:11] = 2b'01enable WL suspend */ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_INTF_PCI_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3) | BIT(4), BIT(3) | BIT(4)}, \
- /* 0x04[12:11] = 2b'11enable WL suspend for PCIe */ \
- {0x0007, PWR_CUT_ALL_MSK, \
- PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \
+ {0x0007, PWR_CUT_ALL_MSK, PWR_BASEADDR_MAC, \
PWR_CMD_WRITE, 0xFF, BIT(7)}, \
/* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */\
- {0x0041, PWR_CUT_ALL_MSK, \
- PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \
+ {0x0041, PWR_CUT_ALL_MSK, PWR_BASEADDR_MAC, \
PWR_CMD_WRITE, BIT(4), 0}, \
/*Clear SIC_EN register 0x40[12] = 1'b0 */ \
- {0xfe10, PWR_CUT_ALL_MSK, \
- PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \
+ {0xfe10, PWR_CUT_ALL_MSK, PWR_BASEADDR_MAC, \
PWR_CMD_WRITE, BIT(4), BIT(4)}, \
- /*Set USB suspend enable local register 0xfe10[4]=1 */ \
- {0x0086, PWR_CUT_ALL_MSK, PWR_INTF_SDIO_MSK, \
- PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), BIT(0)}, \
- /*Set SDIO suspend local register*/ \
- {0x0086, PWR_CUT_ALL_MSK, PWR_INTF_SDIO_MSK, \
- PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), 0}, \
- /*wait power state to suspend*/
+ /*Set USB suspend enable local register 0xfe10[4]=1 */

#define RTL8188E_TRANS_SUS_TO_CARDEMU \
/* format
@@ -149,13 +133,7 @@
* value },
* comments here
*/ \
- {0x0086, PWR_CUT_ALL_MSK, PWR_INTF_SDIO_MSK, \
- PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), 0}, \
- /*Set SDIO suspend local register*/ \
- {0x0086, PWR_CUT_ALL_MSK, PWR_INTF_SDIO_MSK, \
- PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), BIT(1)}, \
- /*wait power state to suspend*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK, \
+ {0x0005, PWR_CUT_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3) | BIT(4), 0}, \
/*0x04[12:11] = 2b'01enable WL suspend*/

@@ -165,30 +143,21 @@
* value },
* comments here
*/ \
- {0x0026, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK, \
+ {0x0026, PWR_CUT_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)}, \
/*0x24[23] = 2b'01 schmit trigger */ \
- {0x0005, PWR_CUT_ALL_MSK, \
- PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_BASEADDR_MAC, \
PWR_CMD_WRITE, BIT(3) | BIT(4), BIT(3)}, \
/*0x04[12:11] = 2b'01 enable WL suspend*/ \
- {0x0007, PWR_CUT_ALL_MSK, \
- PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \
+ {0x0007, PWR_CUT_ALL_MSK, PWR_BASEADDR_MAC, \
PWR_CMD_WRITE, 0xFF, 0}, \
/* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */\
- {0x0041, PWR_CUT_ALL_MSK, \
- PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \
+ {0x0041, PWR_CUT_ALL_MSK, PWR_BASEADDR_MAC, \
PWR_CMD_WRITE, BIT(4), 0}, \
/*Clear SIC_EN register 0x40[12] = 1'b0 */ \
- {0xfe10, PWR_CUT_ALL_MSK, PWR_INTF_USB_MSK, \
+ {0xfe10, PWR_CUT_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, \
- /*Set USB suspend enable local register 0xfe10[4]=1 */ \
- {0x0086, PWR_CUT_ALL_MSK, PWR_INTF_SDIO_MSK, \
- PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), BIT(0)}, \
- /*Set SDIO suspend local register*/ \
- {0x0086, PWR_CUT_ALL_MSK, PWR_INTF_SDIO_MSK, \
- PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), 0}, \
- /*wait power state to suspend*/
+ /*Set USB suspend enable local register 0xfe10[4]=1 */

#define RTL8188E_TRANS_CARDDIS_TO_CARDEMU \
/* format
@@ -196,13 +165,7 @@
* value },
* comments here
*/ \
- {0x0086, PWR_CUT_ALL_MSK, PWR_INTF_SDIO_MSK, \
- PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), 0}, \
- /*Set SDIO suspend local register*/ \
- {0x0086, PWR_CUT_ALL_MSK, PWR_INTF_SDIO_MSK, \
- PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), BIT(1)}, \
- /*wait power state to suspend*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK, \
+ {0x0005, PWR_CUT_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3) | BIT(4), 0}, \
/*0x04[12:11] = 2b'01enable WL suspend*/

@@ -212,10 +175,10 @@
* value },
* comments here
*/ \
- {0x0006, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK, \
+ {0x0006, PWR_CUT_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0}, \
/* 0x04[16] = 0*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK, \
+ {0x0005, PWR_CUT_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)}, \
/* 0x04[15] = 1*/

@@ -225,7 +188,7 @@
* value },
* comments here
*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK, \
+ {0x0005, PWR_CUT_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0}, \
/* 0x04[15] = 0*/

@@ -236,31 +199,31 @@
* value },
* comments here
*/ \
- {0x0522, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK, \
+ {0x0522, PWR_CUT_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x7F},/*Tx Pause*/ \
- {0x05F8, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK, \
+ {0x05F8, PWR_CUT_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \
/*Should be zero if no packet is transmitting*/ \
- {0x05F9, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK, \
+ {0x05F9, PWR_CUT_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \
/*Should be zero if no packet is transmitting*/ \
- {0x05FA, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK, \
+ {0x05FA, PWR_CUT_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \
/*Should be zero if no packet is transmitting*/ \
- {0x05FB, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK, \
+ {0x05FB, PWR_CUT_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \
/*Should be zero if no packet is transmitting*/ \
- {0x0002, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK, \
+ {0x0002, PWR_CUT_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0}, \
/*CCK and OFDM are disabled,and clock are gated*/ \
- {0x0002, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK, \
+ {0x0002, PWR_CUT_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, \
PWRSEQ_DELAY_US},/*Delay 1us*/ \
- {0x0100, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK, \
+ {0x0100, PWR_CUT_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x3F},/*Reset MAC TRX*/ \
- {0x0101, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK, \
+ {0x0101, PWR_CUT_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), 0},/*check if removed later*/\
- {0x0553, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK, \
+ {0x0553, PWR_CUT_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(5), BIT(5)}, \
/*Respond TxOK to scheduler*/

@@ -271,33 +234,29 @@
* value },
* comments here
*/ \
- {0x0080, PWR_CUT_ALL_MSK, PWR_INTF_SDIO_MSK, \
- PWR_BASEADDR_SDIO, PWR_CMD_WRITE, 0xFF, 0x84}, /*SDIO RPWM*/ \
- {0xFE58, PWR_CUT_ALL_MSK, PWR_INTF_USB_MSK, \
+ {0xFE58, PWR_CUT_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84}, /*USB RPWM*/ \
- {0x0361, PWR_CUT_ALL_MSK, PWR_INTF_PCI_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84}, /*PCIe RPWM*/ \
- {0x0002, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK, \
+ {0x0002, PWR_CUT_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_MS}, /*Delay*/ \
- {0x0008, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK, \
+ {0x0008, PWR_CUT_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, \
/* 0x08[4] = 0 switch TSF to 40M */ \
- {0x0109, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK, \
+ {0x0109, PWR_CUT_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(7), 0}, \
/* Polling 0x109[7]=0 TSF in 40M */ \
- {0x0029, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK, \
+ {0x0029, PWR_CUT_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(6) | BIT(7), 0}, \
/* 0x29[7:6] = 2b'00 enable BB clock */ \
- {0x0101, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK, \
+ {0x0101, PWR_CUT_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)}, \
/* 0x101[1] = 1 */ \
- {0x0100, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK, \
+ {0x0100, PWR_CUT_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF}, \
/* 0x100[7:0] = 0xFF enable WMAC TRX */ \
- {0x0002, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK, \
+ {0x0002, PWR_CUT_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1) | BIT(0), BIT(1) | BIT(0)}, \
/* 0x02[1:0] = 2b'11 enable BB macro */ \
- {0x0522, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK, \
+ {0x0522, PWR_CUT_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, /*. 0x522 = 0*/

#define RTL8188E_TRANS_END \
@@ -306,7 +265,7 @@
* value },
* comments here
*/ \
- {0xFFFF, PWR_CUT_ALL_MSK, PWR_INTF_ALL_MSK, 0, \
+ {0xFFFF, PWR_CUT_ALL_MSK, 0, \
PWR_CMD_END, 0, 0},


diff --git a/drivers/staging/rtl8188eu/include/pwrseqcmd.h b/drivers/staging/rtl8188eu/include/pwrseqcmd.h
index ccc066a..9dd5ce5 100644
--- a/drivers/staging/rtl8188eu/include/pwrseqcmd.h
+++ b/drivers/staging/rtl8188eu/include/pwrseqcmd.h
@@ -36,12 +36,6 @@
#define PWR_BASEADDR_PCIE 0x02
#define PWR_BASEADDR_SDIO 0x03

-/* The value of interface_msk: 4 bits */
-#define PWR_INTF_SDIO_MSK BIT(0)
-#define PWR_INTF_USB_MSK BIT(1)
-#define PWR_INTF_PCI_MSK BIT(2)
-#define PWR_INTF_ALL_MSK (BIT(0)|BIT(1)|BIT(2)|BIT(3))
-
/* The value of cut_msk: 8 bits */
#define PWR_CUT_TESTCHIP_MSK BIT(0)
#define PWR_CUT_A_MSK BIT(1)
@@ -62,7 +56,6 @@ enum pwrseq_cmd_delat_unit {
struct wl_pwr_cfg {
u16 offset;
u8 cut_msk;
- u8 interface_msk:4;
u8 base:4;
u8 cmd:4;
u8 msk;
@@ -71,13 +64,12 @@ struct wl_pwr_cfg {

#define GET_PWR_CFG_OFFSET(__PWR_CMD) __PWR_CMD.offset
#define GET_PWR_CFG_CUT_MASK(__PWR_CMD) __PWR_CMD.cut_msk
-#define GET_PWR_CFG_INTF_MASK(__PWR_CMD) __PWR_CMD.interface_msk
#define GET_PWR_CFG_BASE(__PWR_CMD) __PWR_CMD.base
#define GET_PWR_CFG_CMD(__PWR_CMD) __PWR_CMD.cmd
#define GET_PWR_CFG_MASK(__PWR_CMD) __PWR_CMD.msk
#define GET_PWR_CFG_VALUE(__PWR_CMD) __PWR_CMD.value

u8 rtl88eu_pwrseqcmdparsing(struct adapter *padapter, u8 cut_vers,
- u8 ifacetype, struct wl_pwr_cfg pwrcfgCmd[]);
+ struct wl_pwr_cfg pwrcfgCmd[]);

#endif
--
2.4.10