[PATCH 1/2] pinctrl: sunxi: Remove non existing irq's

From: Henry Paulissen
Date: Sun Feb 28 2016 - 18:23:00 EST


While I was testing irq's on the cubietruck I found a couple of
not working irq pins. Further diving into the problem it opened
up a mess called "manual".

This so called manual (A20 user manual v1.3 dated 2014-10-10) says:

Pin overview:
Page 233: EINT12 is on pin PC19 mux6.
Page 236: EINT12 is on pin PH12 mux6.

Now, it is a bit strange to have the same IRQ on 2 different pins,
but I guess this could still be possible hardware wise. But then:

Pin registers:
Page 253: EINT12 is *not* on pin PC19.
Page 281: EINT12 is on pin PH12.

The manual is so contradicting that further tests had to be made
to see which of the 2 statements where correct.

This patch is based on actual outcome of these tests and not what
the manual says.

Test procedure used:

Connect a 1 pulse per second (GPS) line to the pin.

echo pin### > /sys/class/gpio/export
echo in > /sys/class/gpio/gpio###/direction
echo rising > /sys/class/gpio/gpio###/edge

Check /proc/interrupts if a irq was attached and if irq's where
received.

Signed-off-by: Henry Paulissen <henry@xxxxxxxxxxxxxxxx>
---
drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c | 12 ++++--------
1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c b/drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c
index cf1ce0c..25748b4 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c
@@ -343,26 +343,22 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "nand0"), /* NCE4 */
- SUNXI_FUNCTION(0x3, "spi2"), /* CS0 */
- SUNXI_FUNCTION_IRQ(0x6, 12)), /* EINT12 */
+ SUNXI_FUNCTION(0x3, "spi2")), /* CS0 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 20),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "nand0"), /* NCE5 */
- SUNXI_FUNCTION(0x3, "spi2"), /* CLK */
- SUNXI_FUNCTION_IRQ(0x6, 13)), /* EINT13 */
+ SUNXI_FUNCTION(0x3, "spi2")), /* CLK */
SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 21),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "nand0"), /* NCE6 */
- SUNXI_FUNCTION(0x3, "spi2"), /* MOSI */
- SUNXI_FUNCTION_IRQ(0x6, 14)), /* EINT14 */
+ SUNXI_FUNCTION(0x3, "spi2")), /* MOSI */
SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 22),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "nand0"), /* NCE7 */
- SUNXI_FUNCTION(0x3, "spi2"), /* MISO */
- SUNXI_FUNCTION_IRQ(0x6, 15)), /* EINT15 */
+ SUNXI_FUNCTION(0x3, "spi2")), /* MISO */
SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 23),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
--
2.5.0