[PATCH 0/4] Add Ethernet support on STM32F429

From: Alexandre TORGUE
Date: Wed Feb 03 2016 - 09:54:47 EST


STM32F429 Chip embeds a Synopsys 3.50a MAC IP.
This series:
-enhance current stmmac driver to control it (code already available) and
adds basic glue for STM32F429 chip.
-Enable basic Net config in kernel.

Note that DT patches are not present because STM32 pinctrl code is not
yet avalaible.

Regards

Alexandre

Alexandre TORGUE (4):
net: ethernet: dwmac: add Ethernet glue logic for stm32 chip
Documentation: Bindings: Add STM32 DWMAC glue
net: ethernet: stmmac: add support of Synopsys 3.50a MAC IP
ARM: STM32: Enable Ethernet in stm32_defconfig

.../devicetree/bindings/net/stm32-dwmac.txt | 41 +++++
arch/arm/configs/stm32_defconfig | 9 ++
drivers/net/ethernet/stmicro/stmmac/Kconfig | 12 ++
drivers/net/ethernet/stmicro/stmmac/Makefile | 1 +
drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c | 177 +++++++++++++++++++++
.../net/ethernet/stmicro/stmmac/stmmac_platform.c | 1 +
6 files changed, 241 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/stm32-dwmac.txt
create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c

--
1.9.1