[PATCH v3 09/10] Input: synaptics-rmi4: Add device tree support to the SPI transport driver

From: Andrew Duggan
Date: Tue Feb 02 2016 - 20:46:17 EST


Add devicetree binding for SPI devices.

Signed-off-by: Andrew Duggan <aduggan@xxxxxxxxxxxxx>
---
.../devicetree/bindings/input/rmi4/rmi_spi.txt | 57 ++++++++++++++++++++++
drivers/input/rmi4/rmi_spi.c | 44 ++++++++++++++++-
2 files changed, 100 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/input/rmi4/rmi_spi.txt

diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_spi.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_spi.txt
new file mode 100644
index 0000000..367b310
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/rmi4/rmi_spi.txt
@@ -0,0 +1,57 @@
+Synaptics RMI4 SPI Device Binding
+
+The Synaptics RMI4 core is able to support RMI4 devices using different
+transports and different functions. This file describes the device tree
+bindings for devices using the SPI transport driver. Complete documentation
+for other transports and functions can be found in
+Documentation/devicetree/bindings/input/rmi4.
+
+Required Properties:
+- compatible: syna,rmi4-spi
+- reg: Chip select address for the device
+- #address-cells: Set to 1 to indicate that the function child nodes
+ consist of only on uint32 value.
+- #size-cells: Set to 0 to indicate that the function child nodes do not
+ have a size property.
+
+Optional Properties:
+- interrupts: interrupt which the rmi device is connected to.
+- interrupt-parent: The interrupt controller.
+See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+
+- syna,spi-rx-delay-usec: microsecond delay after a read transfer.
+- syna,spi-tx-delay-usec: microsecond delay after a write transfer.
+
+Function Parameters:
+Parameters specific to RMI functions are contained in child nodes of the rmi device
+ node. Documentation for the parameters of each function can be found in:
+Documentation/devicetree/bindings/input/rmi4/rmi_f*.txt.
+
+
+
+Example:
+ spi@7000d800 {
+ rmi4-spi-dev@0 {
+ compatible = "syna,rmi4-spi";
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ spi-max-frequency = <4000000>;
+ spi-cpha;
+ spi-cpol;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(K, 2) 0x2>;
+ syna,spi-rx-delay-usec = <30>;
+
+ rmi4-f01@1 {
+ reg = <0x1>;
+ syna,nosleep-mode = <1>;
+ };
+
+ rmi4-f11@11 {
+ reg = <0x11>;
+ touchscreen-inverted-y;
+ syna,sensor-type = <2>;
+ };
+ };
+ };
diff --git a/drivers/input/rmi4/rmi_spi.c b/drivers/input/rmi4/rmi_spi.c
index 8b4d169..5be321c 100644
--- a/drivers/input/rmi4/rmi_spi.c
+++ b/drivers/input/rmi4/rmi_spi.c
@@ -12,6 +12,7 @@
#include <linux/rmi.h>
#include <linux/slab.h>
#include <linux/spi/spi.h>
+#include <linux/of.h>
#include "rmi_driver.h"

#define RMI_SPI_DEFAULT_XFER_BUF_SIZE 64
@@ -359,6 +360,41 @@ static int rmi_spi_init_irq(struct spi_device *spi)
return 0;
}

+#ifdef CONFIG_OF
+static int rmi_spi_of_probe(struct spi_device *spi,
+ struct rmi_device_platform_data *pdata)
+{
+ struct device *dev = &spi->dev;
+ int retval;
+
+ retval = rmi_of_property_read_u32(dev,
+ &pdata->spi_data.read_delay_us,
+ "syna,spi-rx-delay-usec", 1);
+ if (retval)
+ return retval;
+
+ retval = rmi_of_property_read_u32(dev,
+ &pdata->spi_data.write_delay_us,
+ "syna,spi-tx-delay-usec", 1);
+ if (retval)
+ return retval;
+
+ return 0;
+}
+
+static const struct of_device_id rmi_spi_of_match[] = {
+ { .compatible = "syna,rmi4-spi" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, rmi_spi_of_match);
+#else
+static inline int rmi_spi_of_probe(struct spi_device *spi,
+ struct rmi_device_platform_data *pdata)
+{
+ return -ENODEV;
+}
+#endif
+
static int rmi_spi_probe(struct spi_device *spi)
{
struct rmi_spi_xport *rmi_spi;
@@ -376,8 +412,13 @@ static int rmi_spi_probe(struct spi_device *spi)

pdata = &rmi_spi->xport.pdata;

- if (spi_pdata)
+ if (spi->dev.of_node) {
+ retval = rmi_spi_of_probe(spi, pdata);
+ if (retval)
+ return retval;
+ } else if (spi_pdata) {
*pdata = *spi_pdata;
+ }

if (pdata->spi_data.bits_per_word)
spi->bits_per_word = pdata->spi_data.bits_per_word;
@@ -532,6 +573,7 @@ static struct spi_driver rmi_spi_driver = {
.owner = THIS_MODULE,
.name = "rmi4_spi",
.pm = &rmi_spi_pm,
+ .of_match_table = of_match_ptr(rmi_spi_of_match),
},
.id_table = rmi_id,
.probe = rmi_spi_probe,
--
2.5.0