Re: [PATCH] mmc: dw_mmc: fix num_slots setting

From: Shawn Lin
Date: Tue Feb 02 2016 - 01:02:52 EST


Hi Jaehoon,

On 2016/2/2 12:42, Jaehoon Chung wrote:
Hi, Shawn.

On 01/22/2016 04:43 PM, Shawn Lin wrote:
This patch make num_slots to 1 if pdata->num_slot is not
defined. Meanwhile, we need to make sure num_slots should
not larger that the supported slots

Signed-off-by: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
---

drivers/mmc/host/dw_mmc.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 7128351..065a8f5 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -2949,12 +2949,6 @@ int dw_mci_probe(struct dw_mci *host)
}
}

- if (host->pdata->num_slots < 1) {
- dev_err(host->dev,
- "Platform data must supply num_slots.\n");
- return -ENODEV;
- }
-
host->biu_clk = devm_clk_get(host->dev, "biu");
if (IS_ERR(host->biu_clk)) {
dev_dbg(host->dev, "biu clock not available\n");
@@ -3111,7 +3105,15 @@ int dw_mci_probe(struct dw_mci *host)
if (host->pdata->num_slots)
host->num_slots = host->pdata->num_slots;
else
- host->num_slots = SDMMC_GET_SLOT_NUM(mci_readl(host, HCON));
+ host->num_slots = 1;

If host->nums_slots is set to 1, it assumes that there is one slot.
Then the code in dw_mci_parse_dt() can be removed

dev_info(dev,
"num-slots property not found, assuming 1 slot is available\n");
pdata->num_slots = 1;


Good catch. I will respin v2 to move it.

Thanks.

Best Regards,
Jaehoon Chung


+
+ if (host->num_slots < 1 ||
+ host->num_slots > SDMMC_GET_SLOT_NUM(mci_readl(host, HCON))) {
+ dev_err(host->dev,
+ "Platform data must supply correct num_slots.\n");
+ ret = -ENODEV;
+ goto err_clk_ciu;
+ }

/*
* Enable interrupts for command done, data over, data empty,







--
Best Regards
Shawn Lin