[PATCH char-misc-next 5/8] misc: mic: Enable VOP host side functionality

[Sudeep Dutt]

This patch moves virtio functionality from the MIC host driver into a
separate hardware independent Virtio Over PCIe (VOP) driver. This
functionality was introduced in commit f69bcbf3b4c4 ("Intel MIC Host
Driver Changes for Virtio Devices.") in
drivers/misc/mic/host/mic_virtio.c. Apart from being moved into a
separate driver the functionality is essentially unchanged. See the
above mentioned commit for a description of this functionality.

Signed-off-by: Ashutosh Dixit <ashutosh.dixit@xxxxxxxxx>
Signed-off-by: Sudeep Dutt <sudeep.dutt@xxxxxxxxx>
---
 drivers/misc/mic/vop/vop_vringh.c | 1164 +++++++++++++++++++++++++++++++++++++
 1 file changed, 1164 insertions(+)
 create mode 100644 drivers/misc/mic/vop/vop_vringh.c

diff --git a/drivers/misc/mic/vop/vop_vringh.c b/drivers/misc/mic/vop/vop_vringh.c
new file mode 100644
index 0000000..6dc41fe
--- /dev/null
+++ b/drivers/misc/mic/vop/vop_vringh.c
@@ -0,0 +1,1164 @@
+/*
+ * Intel MIC Platform Software Stack (MPSS)
+ *
+ * Copyright(c) 2016 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Intel Virtio Over PCIe (VOP) driver.
+ *
+ */
+#include <linux/sched.h>
+#include <linux/poll.h>
+#include <linux/dma-mapping.h>
+
+#include <linux/mic_common.h>
+#include "../common/mic_dev.h"
+
+#include <linux/mic_ioctl.h>
+#include "vop_main.h"
+
+/* Helper API to obtain the VOP PCIe device */
+static inline struct device *vop_dev(struct vop_vdev *vdev)
+{
+	return vdev->vpdev->dev.parent;
+}
+
+/* Helper API to check if a virtio device is initialized */
+static inline int vop_vdev_inited(struct vop_vdev *vdev)
+{
+	if (!vdev)
+		return -EINVAL;
+	/* Device has not been created yet */
+	if (!vdev->dd || !vdev->dd->type) {
+		dev_err(vop_dev(vdev), "%s %d err %d\n",
+			__func__, __LINE__, -EINVAL);
+		return -EINVAL;
+	}
+	/* Device has been removed/deleted */
+	if (vdev->dd->type == -1) {
+		dev_dbg(vop_dev(vdev), "%s %d err %d\n",
+			__func__, __LINE__, -ENODEV);
+		return -ENODEV;
+	}
+	return 0;
+}
+
+static void _vop_notify(struct vringh *vrh)
+{
+	struct vop_vringh *vvrh = container_of(vrh, struct vop_vringh, vrh);
+	struct vop_vdev *vdev = vvrh->vdev;
+	struct vop_device *vpdev = vdev->vpdev;
+	s8 db = vdev->dc->h2c_vdev_db;
+
+	if (db != -1)
+		vpdev->hw_ops->send_intr(vpdev, db);
+}
+
+static void vop_virtio_init_post(struct vop_vdev *vdev)
+{
+	struct mic_vqconfig *vqconfig = mic_vq_config(vdev->dd);
+	struct vop_device *vpdev = vdev->vpdev;
+	int i, used_size;
+
+	for (i = 0; i < vdev->dd->num_vq; i++) {
+		used_size = PAGE_ALIGN(sizeof(u16) * 3 +
+				sizeof(struct vring_used_elem) *
+				le16_to_cpu(vqconfig->num));
+		if (!le64_to_cpu(vqconfig[i].used_address)) {
+			dev_warn(vop_dev(vdev), "used_address zero??\n");
+			continue;
+		}
+		vdev->vvr[i].vrh.vring.used =
+			(void __force *)vpdev->hw_ops->ioremap(
+			vpdev,
+			le64_to_cpu(vqconfig[i].used_address),
+			used_size);
+	}
+
+	vdev->dc->used_address_updated = 0;
+
+	dev_info(vop_dev(vdev), "%s: device type %d LINKUP\n",
+		 __func__, vdev->virtio_id);
+}
+
+static inline void vop_virtio_device_reset(struct vop_vdev *vdev)
+{
+	int i;
+
+	dev_dbg(vop_dev(vdev), "%s: status %d device type %d RESET\n",
+		__func__, vdev->dd->status, vdev->virtio_id);
+
+	for (i = 0; i < vdev->dd->num_vq; i++)
+		/*
+		 * Avoid lockdep false positive. The + 1 is for the vop
+		 * mutex which is held in the reset devices code path.
+		 */
+		mutex_lock_nested(&vdev->vvr[i].vr_mutex, i + 1);
+
+	/* 0 status means "reset" */
+	vdev->dd->status = 0;
+	vdev->dc->vdev_reset = 0;
+	vdev->dc->host_ack = 1;
+
+	for (i = 0; i < vdev->dd->num_vq; i++) {
+		struct vringh *vrh = &vdev->vvr[i].vrh;
+
+		vdev->vvr[i].vring.info->avail_idx = 0;
+		vrh->completed = 0;
+		vrh->last_avail_idx = 0;
+		vrh->last_used_idx = 0;
+	}
+
+	for (i = 0; i < vdev->dd->num_vq; i++)
+		mutex_unlock(&vdev->vvr[i].vr_mutex);
+}
+
+static void vop_virtio_reset_devices(struct vop_info *vi)
+{
+	struct list_head *pos, *tmp;
+	struct vop_vdev *vdev;
+
+	list_for_each_safe(pos, tmp, &vi->vdev_list) {
+		vdev = list_entry(pos, struct vop_vdev, list);
+		vop_virtio_device_reset(vdev);
+		vdev->poll_wake = 1;
+		wake_up(&vdev->waitq);
+	}
+}
+
+static void vop_bh_handler(struct work_struct *work)
+{
+	struct vop_vdev *vdev = container_of(work, struct vop_vdev,
+			virtio_bh_work);
+
+	if (vdev->dc->used_address_updated)
+		vop_virtio_init_post(vdev);
+
+	if (vdev->dc->vdev_reset)
+		vop_virtio_device_reset(vdev);
+
+	vdev->poll_wake = 1;
+	wake_up(&vdev->waitq);
+}
+
+static irqreturn_t _vop_virtio_intr_handler(int irq, void *data)
+{
+	struct vop_vdev *vdev = data;
+	struct vop_device *vpdev = vdev->vpdev;
+
+	vpdev->hw_ops->ack_interrupt(vpdev, vdev->virtio_db);
+	schedule_work(&vdev->virtio_bh_work);
+	return IRQ_HANDLED;
+}
+
+static int vop_virtio_config_change(struct vop_vdev *vdev, void *argp)
+{
+	DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake);
+	int ret = 0, retry, i;
+	struct vop_device *vpdev = vdev->vpdev;
+	struct vop_info *vi = vpdev->priv;
+	struct mic_bootparam *bootparam = vpdev->hw_ops->get_dp(vpdev);
+	s8 db = bootparam->h2c_config_db;
+
+	mutex_lock(&vi->vop_mutex);
+	for (i = 0; i < vdev->dd->num_vq; i++)
+		mutex_lock_nested(&vdev->vvr[i].vr_mutex, i + 1);
+
+	if (db == -1 || vdev->dd->type == -1) {
+		ret = -EIO;
+		goto exit;
+	}
+
+	memcpy(mic_vq_configspace(vdev->dd), argp, vdev->dd->config_len);
+	vdev->dc->config_change = MIC_VIRTIO_PARAM_CONFIG_CHANGED;
+	vpdev->hw_ops->send_intr(vpdev, db);
+
+	for (retry = 100; retry--;) {
+		ret = wait_event_timeout(wake, vdev->dc->guest_ack,
+					 msecs_to_jiffies(100));
+		if (ret)
+			break;
+	}
+
+	dev_dbg(vop_dev(vdev),
+		"%s %d retry: %d\n", __func__, __LINE__, retry);
+	vdev->dc->config_change = 0;
+	vdev->dc->guest_ack = 0;
+exit:
+	for (i = 0; i < vdev->dd->num_vq; i++)
+		mutex_unlock(&vdev->vvr[i].vr_mutex);
+	mutex_unlock(&vi->vop_mutex);
+	return ret;
+}
+
+static int vop_copy_dp_entry(struct vop_vdev *vdev,
+			     struct mic_device_desc *argp, __u8 *type,
+			     struct mic_device_desc **devpage)
+{
+	struct vop_device *vpdev = vdev->vpdev;
+	struct mic_device_desc *devp;
+	struct mic_vqconfig *vqconfig;
+	int ret = 0, i;
+	bool slot_found = false;
+
+	vqconfig = mic_vq_config(argp);
+	for (i = 0; i < argp->num_vq; i++) {
+		if (le16_to_cpu(vqconfig[i].num) > MIC_MAX_VRING_ENTRIES) {
+			ret =  -EINVAL;
+			dev_err(vop_dev(vdev), "%s %d err %d\n",
+				__func__, __LINE__, ret);
+			goto exit;
+		}
+	}
+
+	/* Find the first free device page entry */
+	for (i = sizeof(struct mic_bootparam);
+		i < MIC_DP_SIZE - mic_total_desc_size(argp);
+		i += mic_total_desc_size(devp)) {
+		devp = vpdev->hw_ops->get_dp(vpdev) + i;
+		if (devp->type == 0 || devp->type == -1) {
+			slot_found = true;
+			break;
+		}
+	}
+	if (!slot_found) {
+		ret =  -EINVAL;
+		dev_err(vop_dev(vdev), "%s %d err %d\n",
+			__func__, __LINE__, ret);
+		goto exit;
+	}
+	/*
+	 * Save off the type before doing the memcpy. Type will be set in the
+	 * end after completing all initialization for the new device.
+	 */
+	*type = argp->type;
+	argp->type = 0;
+	memcpy(devp, argp, mic_desc_size(argp));
+
+	*devpage = devp;
+exit:
+	return ret;
+}
+
+static void vop_init_device_ctrl(struct vop_vdev *vdev,
+				 struct mic_device_desc *devpage)
+{
+	struct mic_device_ctrl *dc;
+
+	dc = (void *)devpage + mic_aligned_desc_size(devpage);
+
+	dc->config_change = 0;
+	dc->guest_ack = 0;
+	dc->vdev_reset = 0;
+	dc->host_ack = 0;
+	dc->used_address_updated = 0;
+	dc->c2h_vdev_db = -1;
+	dc->h2c_vdev_db = -1;
+	vdev->dc = dc;
+}
+
+static int vop_virtio_add_device(struct vop_vdev *vdev,
+				 struct mic_device_desc *argp)
+{
+	struct vop_info *vi = vdev->vi;
+	struct vop_device *vpdev = vi->vpdev;
+	struct mic_device_desc *dd = NULL;
+	struct mic_vqconfig *vqconfig;
+	int vr_size, i, j, ret;
+	u8 type = 0;
+	s8 db = -1;
+	char irqname[16];
+	struct mic_bootparam *bootparam;
+	u16 num;
+	dma_addr_t vr_addr;
+
+	bootparam = vpdev->hw_ops->get_dp(vpdev);
+	init_waitqueue_head(&vdev->waitq);
+	INIT_LIST_HEAD(&vdev->list);
+	vdev->vpdev = vpdev;
+
+	ret = vop_copy_dp_entry(vdev, argp, &type, &dd);
+	if (ret) {
+		kfree(vdev);
+		dev_err(vop_dev(vdev), "%s %d err %d\n",
+			__func__, __LINE__, ret);
+		return ret;
+	}
+
+	vop_init_device_ctrl(vdev, dd);
+
+	vdev->dd = dd;
+	vdev->virtio_id = type;
+	vqconfig = mic_vq_config(dd);
+	INIT_WORK(&vdev->virtio_bh_work, vop_bh_handler);
+
+	for (i = 0; i < dd->num_vq; i++) {
+		struct vop_vringh *vvr = &vdev->vvr[i];
+		struct mic_vring *vr = &vdev->vvr[i].vring;
+
+		num = le16_to_cpu(vqconfig[i].num);
+		mutex_init(&vvr->vr_mutex);
+		vr_size = PAGE_ALIGN(vring_size(num, MIC_VIRTIO_RING_ALIGN) +
+			sizeof(struct _mic_vring_info));
+		vr->va = (void *)
+			__get_free_pages(GFP_KERNEL | __GFP_ZERO,
+					 get_order(vr_size));
+		if (!vr->va) {
+			ret = -ENOMEM;
+			dev_err(vop_dev(vdev), "%s %d err %d\n",
+				__func__, __LINE__, ret);
+			goto err;
+		}
+		vr->len = vr_size;
+		vr->info = vr->va + vring_size(num, MIC_VIRTIO_RING_ALIGN);
+		vr->info->magic = cpu_to_le32(MIC_MAGIC + vdev->virtio_id + i);
+		vr_addr = dma_map_single(&vpdev->dev, vr->va, vr_size,
+					 DMA_BIDIRECTIONAL);
+		if (dma_mapping_error(&vpdev->dev, vr_addr)) {
+			free_pages((unsigned long)vr->va, get_order(vr_size));
+			ret = -ENOMEM;
+			dev_err(vop_dev(vdev), "%s %d err %d\n",
+				__func__, __LINE__, ret);
+			goto err;
+		}
+		vqconfig[i].address = cpu_to_le64(vr_addr);
+
+		vring_init(&vr->vr, num, vr->va, MIC_VIRTIO_RING_ALIGN);
+		ret = vringh_init_kern(&vvr->vrh,
+				       *(u32 *)mic_vq_features(vdev->dd),
+				       num, false, vr->vr.desc, vr->vr.avail,
+				       vr->vr.used);
+		if (ret) {
+			dev_err(vop_dev(vdev), "%s %d err %d\n",
+				__func__, __LINE__, ret);
+			goto err;
+		}
+		vringh_kiov_init(&vvr->riov, NULL, 0);
+		vringh_kiov_init(&vvr->wiov, NULL, 0);
+		vvr->head = USHRT_MAX;
+		vvr->vdev = vdev;
+		vvr->vrh.notify = _vop_notify;
+		dev_dbg(&vpdev->dev,
+			"%s %d index %d va %p info %p vr_size 0x%x\n",
+			__func__, __LINE__, i, vr->va, vr->info, vr_size);
+		vvr->buf = (void *)__get_free_pages(GFP_KERNEL,
+					get_order(VOP_INT_DMA_BUF_SIZE));
+		vvr->buf_da = dma_map_single(&vpdev->dev,
+					  vvr->buf, VOP_INT_DMA_BUF_SIZE,
+					  DMA_BIDIRECTIONAL);
+	}
+
+	snprintf(irqname, sizeof(irqname), "vop%dvirtio%d", vpdev->index,
+		 vdev->virtio_id);
+	vdev->virtio_db = vpdev->hw_ops->next_db(vpdev);
+	vdev->virtio_cookie = vpdev->hw_ops->request_irq(vpdev,
+			_vop_virtio_intr_handler, irqname, vdev,
+			vdev->virtio_db);
+	if (IS_ERR(vdev->virtio_cookie)) {
+		ret = PTR_ERR(vdev->virtio_cookie);
+		dev_dbg(&vpdev->dev, "request irq failed\n");
+		goto err;
+	}
+
+	vdev->dc->c2h_vdev_db = vdev->virtio_db;
+
+	/*
+	 * Order the type update with previous stores. This write barrier
+	 * is paired with the corresponding read barrier before the uncached
+	 * system memory read of the type, on the card while scanning the
+	 * device page.
+	 */
+	smp_wmb();
+	dd->type = type;
+	argp->type = type;
+
+	if (bootparam) {
+		db = bootparam->h2c_config_db;
+		if (db != -1)
+			vpdev->hw_ops->send_intr(vpdev, db);
+	}
+	dev_dbg(&vpdev->dev, "Added virtio id %d db %d\n", dd->type, db);
+	return 0;
+err:
+	vqconfig = mic_vq_config(dd);
+	for (j = 0; j < i; j++) {
+		struct vop_vringh *vvr = &vdev->vvr[j];
+
+		dma_unmap_single(&vpdev->dev, le64_to_cpu(vqconfig[j].address),
+				 vvr->vring.len, DMA_BIDIRECTIONAL);
+		free_pages((unsigned long)vvr->vring.va,
+			   get_order(vvr->vring.len));
+	}
+	return ret;
+}
+
+static void vop_dev_remove(struct vop_info *pvi, struct mic_device_ctrl *devp,
+			   struct vop_device *vpdev)
+{
+	struct mic_bootparam *bootparam = vpdev->hw_ops->get_dp(vpdev);
+	s8 db;
+	int ret, retry;
+	DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake);
+
+	devp->config_change = MIC_VIRTIO_PARAM_DEV_REMOVE;
+	db = bootparam->h2c_config_db;
+	if (db != -1)
+		vpdev->hw_ops->send_intr(vpdev, db);
+	else
+		goto done;
+	for (retry = 15; retry--;) {
+		ret = wait_event_timeout(wake, devp->guest_ack,
+					 msecs_to_jiffies(1000));
+		if (ret)
+			break;
+	}
+done:
+	devp->config_change = 0;
+	devp->guest_ack = 0;
+}
+
+static void vop_virtio_del_device(struct vop_vdev *vdev)
+{
+	struct vop_info *vi = vdev->vi;
+	struct vop_device *vpdev = vdev->vpdev;
+	int i;
+	struct mic_vqconfig *vqconfig;
+	struct mic_bootparam *bootparam = vpdev->hw_ops->get_dp(vpdev);
+
+	if (!bootparam)
+		goto skip_hot_remove;
+	vop_dev_remove(vi, vdev->dc, vpdev);
+skip_hot_remove:
+	vpdev->hw_ops->free_irq(vpdev, vdev->virtio_cookie, vdev);
+	flush_work(&vdev->virtio_bh_work);
+	vqconfig = mic_vq_config(vdev->dd);
+	for (i = 0; i < vdev->dd->num_vq; i++) {
+		struct vop_vringh *vvr = &vdev->vvr[i];
+
+		dma_unmap_single(&vpdev->dev,
+				 vvr->buf_da, VOP_INT_DMA_BUF_SIZE,
+				 DMA_BIDIRECTIONAL);
+		free_pages((unsigned long)vvr->buf,
+			   get_order(VOP_INT_DMA_BUF_SIZE));
+		vringh_kiov_cleanup(&vvr->riov);
+		vringh_kiov_cleanup(&vvr->wiov);
+		dma_unmap_single(&vpdev->dev, le64_to_cpu(vqconfig[i].address),
+				 vvr->vring.len, DMA_BIDIRECTIONAL);
+		free_pages((unsigned long)vvr->vring.va,
+			   get_order(vvr->vring.len));
+	}
+	/*
+	 * Order the type update with previous stores. This write barrier
+	 * is paired with the corresponding read barrier before the uncached
+	 * system memory read of the type, on the card while scanning the
+	 * device page.
+	 */
+	smp_wmb();
+	vdev->dd->type = -1;
+}
+
+/*
+ * vop_sync_dma - Wrapper for synchronous DMAs.
+ *
+ * @dev - The address of the pointer to the device instance used
+ * for DMA registration.
+ * @dst - destination DMA address.
+ * @src - source DMA address.
+ * @len - size of the transfer.
+ *
+ * Return DMA_SUCCESS on success
+ */
+static int vop_sync_dma(struct vop_vdev *vdev, dma_addr_t dst, dma_addr_t src,
+			size_t len)
+{
+	int err = 0;
+	struct dma_device *ddev;
+	struct dma_async_tx_descriptor *tx;
+	struct vop_info *vi = vdev->vpdev->priv;
+	struct dma_chan *vop_ch = vi->dma_ch;
+
+	if (!vop_ch) {
+		err = -EBUSY;
+		goto error;
+	}
+	ddev = vop_ch->device;
+	tx = ddev->device_prep_dma_memcpy(vop_ch, dst, src, len,
+		DMA_PREP_FENCE);
+	if (!tx) {
+		err = -ENOMEM;
+		goto error;
+	} else {
+		dma_cookie_t cookie;
+
+		cookie = tx->tx_submit(tx);
+		if (dma_submit_error(cookie)) {
+			err = -ENOMEM;
+			goto error;
+		}
+		dma_async_issue_pending(vop_ch);
+		err = dma_sync_wait(vop_ch, cookie);
+	}
+error:
+	if (err)
+		dev_err(&vi->vpdev->dev, "%s %d err %d\n",
+			__func__, __LINE__, err);
+	return err;
+}
+
+#define VOP_USE_DMA true
+
+/*
+ * Initiates the copies across the PCIe bus from card memory to a user
+ * space buffer. When transfers are done using DMA, source/destination
+ * addresses and transfer length must follow the alignment requirements of
+ * the MIC DMA engine.
+ */
+static int vop_virtio_copy_to_user(struct vop_vdev *vdev, void __user *ubuf,
+				   size_t len, u64 daddr, size_t dlen,
+				   int vr_idx)
+{
+	struct vop_device *vpdev = vdev->vpdev;
+	void __iomem *dbuf = vpdev->hw_ops->ioremap(vpdev, daddr, len);
+	struct vop_vringh *vvr = &vdev->vvr[vr_idx];
+	struct vop_info *vi = vdev->vpdev->priv;
+	size_t dma_alignment = 1 << vi->dma_ch->device->copy_align;
+	bool x200 = is_dma_copy_aligned(vi->dma_ch->device, 1, 1, 1);
+	size_t dma_offset, partlen;
+	int err;
+
+	if (!VOP_USE_DMA) {
+		if (copy_to_user(ubuf, (void __force *)dbuf, len)) {
+			err = -EFAULT;
+			dev_err(vop_dev(vdev), "%s %d err %d\n",
+				__func__, __LINE__, err);
+			goto err;
+		}
+		vdev->in_bytes += len;
+		err = 0;
+		goto err;
+	}
+
+	dma_offset = daddr - round_down(daddr, dma_alignment);
+	daddr -= dma_offset;
+	len += dma_offset;
+	/*
+	 * X100 uses DMA addresses as seen by the card so adding
+	 * the aperture base is not required for DMA. However x200
+	 * requires DMA addresses to be an offset into the bar so
+	 * add the aperture base for x200.
+	 */
+	if (x200)
+		daddr += vpdev->aper->pa;
+	while (len) {
+		partlen = min_t(size_t, len, VOP_INT_DMA_BUF_SIZE);
+		err = vop_sync_dma(vdev, vvr->buf_da, daddr,
+				   ALIGN(partlen, dma_alignment));
+		if (err) {
+			dev_err(vop_dev(vdev), "%s %d err %d\n",
+				__func__, __LINE__, err);
+			goto err;
+		}
+		if (copy_to_user(ubuf, vvr->buf + dma_offset,
+				 partlen - dma_offset)) {
+			err = -EFAULT;
+			dev_err(vop_dev(vdev), "%s %d err %d\n",
+				__func__, __LINE__, err);
+			goto err;
+		}
+		daddr += partlen;
+		ubuf += partlen;
+		dbuf += partlen;
+		vdev->in_bytes_dma += partlen;
+		vdev->in_bytes += partlen;
+		len -= partlen;
+		dma_offset = 0;
+	}
+	err = 0;
+err:
+	vpdev->hw_ops->iounmap(vpdev, dbuf);
+	dev_dbg(vop_dev(vdev),
+		"%s: ubuf %p dbuf %p len 0x%lx vr_idx 0x%x\n",
+		__func__, ubuf, dbuf, len, vr_idx);
+	return err;
+}
+
+/*
+ * Initiates copies across the PCIe bus from a user space buffer to card
+ * memory. When transfers are done using DMA, source/destination addresses
+ * and transfer length must follow the alignment requirements of the MIC
+ * DMA engine.
+ */
+static int vop_virtio_copy_from_user(struct vop_vdev *vdev, void __user *ubuf,
+				     size_t len, u64 daddr, size_t dlen,
+				     int vr_idx)
+{
+	struct vop_device *vpdev = vdev->vpdev;
+	void __iomem *dbuf = vpdev->hw_ops->ioremap(vpdev, daddr, len);
+	struct vop_vringh *vvr = &vdev->vvr[vr_idx];
+	struct vop_info *vi = vdev->vpdev->priv;
+	size_t dma_alignment = 1 << vi->dma_ch->device->copy_align;
+	bool x200 = is_dma_copy_aligned(vi->dma_ch->device, 1, 1, 1);
+	size_t partlen;
+	bool dma = VOP_USE_DMA;
+	int err = 0;
+
+	if (daddr & (dma_alignment - 1)) {
+		vdev->tx_dst_unaligned += len;
+		dma = false;
+	} else if (ALIGN(len, dma_alignment) > dlen) {
+		vdev->tx_len_unaligned += len;
+		dma = false;
+	}
+
+	if (!dma)
+		goto memcpy;
+
+	/*
+	 * X100 uses DMA addresses as seen by the card so adding
+	 * the aperture base is not required for DMA. However x200
+	 * requires DMA addresses to be an offset into the bar so
+	 * add the aperture base for x200.
+	 */
+	if (x200)
+		daddr += vpdev->aper->pa;
+	while (len) {
+		partlen = min_t(size_t, len, VOP_INT_DMA_BUF_SIZE);
+
+		if (copy_from_user(vvr->buf, ubuf, partlen)) {
+			err = -EFAULT;
+			dev_err(vop_dev(vdev), "%s %d err %d\n",
+				__func__, __LINE__, err);
+			goto err;
+		}
+		err = vop_sync_dma(vdev, daddr, vvr->buf_da,
+				   ALIGN(partlen, dma_alignment));
+		if (err) {
+			dev_err(vop_dev(vdev), "%s %d err %d\n",
+				__func__, __LINE__, err);
+			goto err;
+		}
+		daddr += partlen;
+		ubuf += partlen;
+		dbuf += partlen;
+		vdev->out_bytes_dma += partlen;
+		vdev->out_bytes += partlen;
+		len -= partlen;
+	}
+memcpy:
+	/*
+	 * We are copying to IO below and should ideally use something
+	 * like copy_from_user_toio(..) if it existed.
+	 */
+	if (copy_from_user((void __force *)dbuf, ubuf, len)) {
+		err = -EFAULT;
+		dev_err(vop_dev(vdev), "%s %d err %d\n",
+			__func__, __LINE__, err);
+		goto err;
+	}
+	vdev->out_bytes += len;
+	err = 0;
+err:
+	vpdev->hw_ops->iounmap(vpdev, dbuf);
+	dev_dbg(vop_dev(vdev),
+		"%s: ubuf %p dbuf %p len 0x%lx vr_idx 0x%x\n",
+		__func__, ubuf, dbuf, len, vr_idx);
+	return err;
+}
+
+#define MIC_VRINGH_READ true
+
+/* Determine the total number of bytes consumed in a VRINGH KIOV */
+static inline u32 vop_vringh_iov_consumed(struct vringh_kiov *iov)
+{
+	int i;
+	u32 total = iov->consumed;
+
+	for (i = 0; i < iov->i; i++)
+		total += iov->iov[i].iov_len;
+	return total;
+}
+
+/*
+ * Traverse the VRINGH KIOV and issue the APIs to trigger the copies.
+ * This API is heavily based on the vringh_iov_xfer(..) implementation
+ * in vringh.c. The reason we cannot reuse vringh_iov_pull_kern(..)
+ * and vringh_iov_push_kern(..) directly is because there is no
+ * way to override the VRINGH xfer(..) routines as of v3.10.
+ */
+static int vop_vringh_copy(struct vop_vdev *vdev, struct vringh_kiov *iov,
+			   void __user *ubuf, size_t len, bool read, int vr_idx,
+			   size_t *out_len)
+{
+	int ret = 0;
+	size_t partlen, tot_len = 0;
+
+	while (len && iov->i < iov->used) {
+		struct kvec *kiov = &iov->iov[iov->i];
+
+		partlen = min(kiov->iov_len, len);
+		if (read)
+			ret = vop_virtio_copy_to_user(vdev, ubuf, partlen,
+						      (u64)kiov->iov_base,
+						      kiov->iov_len,
+						      vr_idx);
+		else
+			ret = vop_virtio_copy_from_user(vdev, ubuf, partlen,
+							(u64)kiov->iov_base,
+							kiov->iov_len,
+							vr_idx);
+		if (ret) {
+			dev_err(vop_dev(vdev), "%s %d err %d\n",
+				__func__, __LINE__, ret);
+			break;
+		}
+		len -= partlen;
+		ubuf += partlen;
+		tot_len += partlen;
+		iov->consumed += partlen;
+		kiov->iov_len -= partlen;
+		kiov->iov_base += partlen;
+		if (!kiov->iov_len) {
+			/* Fix up old iov element then increment. */
+			kiov->iov_len = iov->consumed;
+			kiov->iov_base -= iov->consumed;
+
+			iov->consumed = 0;
+			iov->i++;
+		}
+	}
+	*out_len = tot_len;
+	return ret;
+}
+
+/*
+ * Use the standard VRINGH infrastructure in the kernel to fetch new
+ * descriptors, initiate the copies and update the used ring.
+ */
+static int _vop_virtio_copy(struct vop_vdev *vdev, struct mic_copy_desc *copy)
+{
+	int ret = 0;
+	u32 iovcnt = copy->iovcnt;
+	struct iovec iov;
+	struct iovec __user *u_iov = copy->iov;
+	void __user *ubuf = NULL;
+	struct vop_vringh *vvr = &vdev->vvr[copy->vr_idx];
+	struct vringh_kiov *riov = &vvr->riov;
+	struct vringh_kiov *wiov = &vvr->wiov;
+	struct vringh *vrh = &vvr->vrh;
+	u16 *head = &vvr->head;
+	struct mic_vring *vr = &vvr->vring;
+	size_t len = 0, out_len;
+
+	copy->out_len = 0;
+	/* Fetch a new IOVEC if all previous elements have been processed */
+	if (riov->i == riov->used && wiov->i == wiov->used) {
+		ret = vringh_getdesc_kern(vrh, riov, wiov,
+					  head, GFP_KERNEL);
+		/* Check if there are available descriptors */
+		if (ret <= 0)
+			return ret;
+	}
+	while (iovcnt) {
+		if (!len) {
+			/* Copy over a new iovec from user space. */
+			ret = copy_from_user(&iov, u_iov, sizeof(*u_iov));
+			if (ret) {
+				ret = -EINVAL;
+				dev_err(vop_dev(vdev), "%s %d err %d\n",
+					__func__, __LINE__, ret);
+				break;
+			}
+			len = iov.iov_len;
+			ubuf = iov.iov_base;
+		}
+		/* Issue all the read descriptors first */
+		ret = vop_vringh_copy(vdev, riov, ubuf, len,
+				      MIC_VRINGH_READ, copy->vr_idx, &out_len);
+		if (ret) {
+			dev_err(vop_dev(vdev), "%s %d err %d\n",
+				__func__, __LINE__, ret);
+			break;
+		}
+		len -= out_len;
+		ubuf += out_len;
+		copy->out_len += out_len;
+		/* Issue the write descriptors next */
+		ret = vop_vringh_copy(vdev, wiov, ubuf, len,
+				      !MIC_VRINGH_READ, copy->vr_idx, &out_len);
+		if (ret) {
+			dev_err(vop_dev(vdev), "%s %d err %d\n",
+				__func__, __LINE__, ret);
+			break;
+		}
+		len -= out_len;
+		ubuf += out_len;
+		copy->out_len += out_len;
+		if (!len) {
+			/* One user space iovec is now completed */
+			iovcnt--;
+			u_iov++;
+		}
+		/* Exit loop if all elements in KIOVs have been processed. */
+		if (riov->i == riov->used && wiov->i == wiov->used)
+			break;
+	}
+	/*
+	 * Update the used ring if a descriptor was available and some data was
+	 * copied in/out and the user asked for a used ring update.
+	 */
+	if (*head != USHRT_MAX && copy->out_len && copy->update_used) {
+		u32 total = 0;
+
+		/* Determine the total data consumed */
+		total += vop_vringh_iov_consumed(riov);
+		total += vop_vringh_iov_consumed(wiov);
+		vringh_complete_kern(vrh, *head, total);
+		*head = USHRT_MAX;
+		if (vringh_need_notify_kern(vrh) > 0)
+			vringh_notify(vrh);
+		vringh_kiov_cleanup(riov);
+		vringh_kiov_cleanup(wiov);
+		/* Update avail idx for user space */
+		vr->info->avail_idx = vrh->last_avail_idx;
+	}
+	return ret;
+}
+
+static inline int vop_verify_copy_args(struct vop_vdev *vdev,
+				       struct mic_copy_desc *copy)
+{
+	if (!vdev || copy->vr_idx >= vdev->dd->num_vq)
+		return -EINVAL;
+	return 0;
+}
+
+/* Copy a specified number of virtio descriptors in a chain */
+static int vop_virtio_copy_desc(struct vop_vdev *vdev,
+				struct mic_copy_desc *copy)
+{
+	int err;
+	struct vop_vringh *vvr = &vdev->vvr[copy->vr_idx];
+
+	err = vop_verify_copy_args(vdev, copy);
+	if (err)
+		return err;
+
+	mutex_lock(&vvr->vr_mutex);
+	if (!vop_vdevup(vdev)) {
+		err = -ENODEV;
+		dev_err(vop_dev(vdev), "%s %d err %d\n",
+			__func__, __LINE__, err);
+		goto err;
+	}
+	err = _vop_virtio_copy(vdev, copy);
+	if (err) {
+		dev_err(vop_dev(vdev), "%s %d err %d\n",
+			__func__, __LINE__, err);
+	}
+err:
+	mutex_unlock(&vvr->vr_mutex);
+	return err;
+}
+
+static int vop_open(struct inode *inode, struct file *f)
+{
+	struct vop_vdev *vdev;
+	struct vop_info *vi = container_of(f->private_data,
+		struct vop_info, miscdev);
+
+	vdev = kzalloc(sizeof(*vdev), GFP_KERNEL);
+	if (!vdev)
+		return -ENOMEM;
+	vdev->vi = vi;
+	mutex_init(&vdev->vdev_mutex);
+	f->private_data = vdev;
+	init_completion(&vdev->destroy);
+	complete(&vdev->destroy);
+	return 0;
+}
+
+static int vop_release(struct inode *inode, struct file *f)
+{
+	struct vop_vdev *vdev = f->private_data, *vdev_tmp;
+	struct vop_info *vi = vdev->vi;
+	struct list_head *pos, *tmp;
+	bool found = false;
+
+	mutex_lock(&vdev->vdev_mutex);
+	if (vdev->deleted)
+		goto unlock;
+	mutex_lock(&vi->vop_mutex);
+	list_for_each_safe(pos, tmp, &vi->vdev_list) {
+		vdev_tmp = list_entry(pos, struct vop_vdev, list);
+		if (vdev == vdev_tmp) {
+			vop_virtio_del_device(vdev);
+			list_del(pos);
+			found = true;
+			break;
+		}
+	}
+	mutex_unlock(&vi->vop_mutex);
+unlock:
+	mutex_unlock(&vdev->vdev_mutex);
+	if (!found)
+		wait_for_completion(&vdev->destroy);
+	f->private_data = NULL;
+	kfree(vdev);
+	return 0;
+}
+
+static long vop_ioctl(struct file *f, unsigned int cmd, unsigned long arg)
+{
+	struct vop_vdev *vdev = f->private_data;
+	struct vop_info *vi = vdev->vi;
+	void __user *argp = (void __user *)arg;
+	int ret;
+
+	switch (cmd) {
+	case MIC_VIRTIO_ADD_DEVICE:
+	{
+		struct mic_device_desc dd, *dd_config;
+
+		if (copy_from_user(&dd, argp, sizeof(dd)))
+			return -EFAULT;
+
+		if (mic_aligned_desc_size(&dd) > MIC_MAX_DESC_BLK_SIZE ||
+		    dd.num_vq > MIC_MAX_VRINGS)
+			return -EINVAL;
+
+		dd_config = kzalloc(mic_desc_size(&dd), GFP_KERNEL);
+		if (!dd_config)
+			return -ENOMEM;
+		if (copy_from_user(dd_config, argp, mic_desc_size(&dd))) {
+			ret = -EFAULT;
+			goto free_ret;
+		}
+		mutex_lock(&vdev->vdev_mutex);
+		mutex_lock(&vi->vop_mutex);
+		ret = vop_virtio_add_device(vdev, dd_config);
+		if (ret)
+			goto unlock_ret;
+		list_add_tail(&vdev->list, &vi->vdev_list);
+unlock_ret:
+		mutex_unlock(&vi->vop_mutex);
+		mutex_unlock(&vdev->vdev_mutex);
+free_ret:
+		kfree(dd_config);
+		return ret;
+	}
+	case MIC_VIRTIO_COPY_DESC:
+	{
+		struct mic_copy_desc copy;
+
+		mutex_lock(&vdev->vdev_mutex);
+		ret = vop_vdev_inited(vdev);
+		if (ret)
+			goto _unlock_ret;
+
+		if (copy_from_user(&copy, argp, sizeof(copy))) {
+			ret = -EFAULT;
+			goto _unlock_ret;
+		}
+
+		ret = vop_virtio_copy_desc(vdev, &copy);
+		if (ret < 0)
+			goto _unlock_ret;
+		if (copy_to_user(
+			&((struct mic_copy_desc __user *)argp)->out_len,
+			&copy.out_len, sizeof(copy.out_len)))
+			ret = -EFAULT;
+_unlock_ret:
+		mutex_unlock(&vdev->vdev_mutex);
+		return ret;
+	}
+	case MIC_VIRTIO_CONFIG_CHANGE:
+	{
+		void *buf;
+
+		mutex_lock(&vdev->vdev_mutex);
+		ret = vop_vdev_inited(vdev);
+		if (ret)
+			goto __unlock_ret;
+		buf = kzalloc(vdev->dd->config_len, GFP_KERNEL);
+		if (!buf) {
+			ret = -ENOMEM;
+			goto __unlock_ret;
+		}
+		if (copy_from_user(buf, argp, vdev->dd->config_len)) {
+			ret = -EFAULT;
+			goto done;
+		}
+		ret = vop_virtio_config_change(vdev, buf);
+done:
+		kfree(buf);
+__unlock_ret:
+		mutex_unlock(&vdev->vdev_mutex);
+		return ret;
+	}
+	default:
+		return -ENOIOCTLCMD;
+	};
+	return 0;
+}
+
+/*
+ * We return POLLIN | POLLOUT from poll when new buffers are enqueued, and
+ * not when previously enqueued buffers may be available. This means that
+ * in the card->host (TX) path, when userspace is unblocked by poll it
+ * must drain all available descriptors or it can stall.
+ */
+static unsigned int vop_poll(struct file *f, poll_table *wait)
+{
+	struct vop_vdev *vdev = f->private_data;
+	int mask = 0;
+
+	mutex_lock(&vdev->vdev_mutex);
+	if (vop_vdev_inited(vdev)) {
+		mask = POLLERR;
+		goto done;
+	}
+	poll_wait(f, &vdev->waitq, wait);
+	if (vop_vdev_inited(vdev)) {
+		mask = POLLERR;
+	} else if (vdev->poll_wake) {
+		vdev->poll_wake = 0;
+		mask = POLLIN | POLLOUT;
+	}
+done:
+	mutex_unlock(&vdev->vdev_mutex);
+	return mask;
+}
+
+static inline int
+vop_query_offset(struct vop_vdev *vdev, unsigned long offset,
+		 unsigned long *size, unsigned long *pa)
+{
+	struct vop_device *vpdev = vdev->vpdev;
+	unsigned long start = MIC_DP_SIZE;
+	int i;
+
+	/*
+	 * MMAP interface is as follows:
+	 * offset				region
+	 * 0x0					virtio device_page
+	 * 0x1000				first vring
+	 * 0x1000 + size of 1st vring		second vring
+	 * ....
+	 */
+	if (!offset) {
+		*pa = virt_to_phys(vpdev->hw_ops->get_dp(vpdev));
+		*size = MIC_DP_SIZE;
+		return 0;
+	}
+
+	for (i = 0; i < vdev->dd->num_vq; i++) {
+		struct vop_vringh *vvr = &vdev->vvr[i];
+
+		if (offset == start) {
+			*pa = virt_to_phys(vvr->vring.va);
+			*size = vvr->vring.len;
+			return 0;
+		}
+		start += vvr->vring.len;
+	}
+	return -1;
+}
+
+/*
+ * Maps the device page and virtio rings to user space for readonly access.
+ */
+static int vop_mmap(struct file *f, struct vm_area_struct *vma)
+{
+	struct vop_vdev *vdev = f->private_data;
+	unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
+	unsigned long pa, size = vma->vm_end - vma->vm_start, size_rem = size;
+	int i, err;
+
+	err = vop_vdev_inited(vdev);
+	if (err)
+		goto ret;
+	if (vma->vm_flags & VM_WRITE) {
+		err = -EACCES;
+		goto ret;
+	}
+	while (size_rem) {
+		i = vop_query_offset(vdev, offset, &size, &pa);
+		if (i < 0) {
+			err = -EINVAL;
+			goto ret;
+		}
+		err = remap_pfn_range(vma, vma->vm_start + offset,
+				      pa >> PAGE_SHIFT, size,
+				      vma->vm_page_prot);
+		if (err)
+			goto ret;
+		size_rem -= size;
+		offset += size;
+	}
+ret:
+	return err;
+}
+
+static const struct file_operations vop_fops = {
+	.open = vop_open,
+	.release = vop_release,
+	.unlocked_ioctl = vop_ioctl,
+	.poll = vop_poll,
+	.mmap = vop_mmap,
+	.owner = THIS_MODULE,
+};
+
+int vop_host_init(struct vop_info *vi)
+{
+	int rc;
+	struct miscdevice *mdev;
+	struct vop_device *vpdev = vi->vpdev;
+
+	INIT_LIST_HEAD(&vi->vdev_list);
+	vi->dma_ch = vpdev->dma_ch;
+	mdev = &vi->miscdev;
+	mdev->minor = MISC_DYNAMIC_MINOR;
+	snprintf(vi->name, sizeof(vi->name), "vop_virtio%d", vpdev->index);
+	mdev->name = vi->name;
+	mdev->fops = &vop_fops;
+	mdev->parent = &vpdev->dev;
+
+	rc = misc_register(mdev);
+	if (rc)
+		dev_err(&vpdev->dev, "%s failed rc %d\n", __func__, rc);
+	return rc;
+}
+
+void vop_host_uninit(struct vop_info *vi)
+{
+	struct list_head *pos, *tmp;
+	struct vop_vdev *vdev;
+
+	mutex_lock(&vi->vop_mutex);
+	vop_virtio_reset_devices(vi);
+	list_for_each_safe(pos, tmp, &vi->vdev_list) {
+		vdev = list_entry(pos, struct vop_vdev, list);
+		list_del(pos);
+		reinit_completion(&vdev->destroy);
+		mutex_unlock(&vi->vop_mutex);
+		mutex_lock(&vdev->vdev_mutex);
+		vop_virtio_del_device(vdev);
+		vdev->deleted = true;
+		mutex_unlock(&vdev->vdev_mutex);
+		complete(&vdev->destroy);
+		mutex_lock(&vi->vop_mutex);
+	}
+	mutex_unlock(&vi->vop_mutex);
+	misc_deregister(&vi->miscdev);
+}
-- 
1.8.2.1