Re: [PATCH 11/14] ARM: dts: sun8i-a83t: Add R_PIO controller node to the dtsi

From: Chen-Yu Tsai
Date: Sat Jan 30 2016 - 22:46:56 EST


On Sun, Jan 31, 2016 at 9:21 AM, Vishnu Patekar
<vishnupatekar0510@xxxxxxxxx> wrote:
> Now that we have a driver for the R_PIO controller,
> add the corresponding device node to the dtsi.
>
> Signed-off-by: Vishnu Patekar <vishnupatekar0510@xxxxxxxxx>
> ---
> arch/arm/boot/dts/sun8i-a83t.dtsi | 21 +++++++++++++++++++++
> 1 file changed, 21 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
> index 5ea20ff..11be9e1 100644
> --- a/arch/arm/boot/dts/sun8i-a83t.dtsi
> +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
> @@ -478,5 +478,26 @@
> compatible = "allwinner,sun6i-a31-clock-reset";
> #reset-cells = <1>;
> };
> +
> + r_pio: pinctrl@01f02c00 {
> + compatible = "allwinner,sun8i-a83t-r-pinctrl";
> + reg = <0x01f02c00 0x400>;
> + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&apb0_gates 0>;
> + resets = <&apb0_reset 0>;
> + gpio-controller;
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + #address-cells = <1>;
> + #size-cells = <0>;

#address-cells and #size-cells aren't needed. They were incorrectly included
in the first place. They were removed from &pio but not &r_pio.

> + #gpio-cells = <3>;
> +
> + r_rsb_pins: r_rsb {
> + allwinner,pins = "PL0", "PL1";
> + allwinner,function = "s_rsb";
> + allwinner,drive = <SUN4I_PINCTRL_20_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
> + };

This setting should be part of the next patch, the RSB node patch.
The rest looks fine.

ChenYu

> + };
> };
> };
> --
> 1.9.1
>