Re: [PATCH 1/1] ACPI: Support D3 COLD device for old BIOS

From: Rafael J. Wysocki
Date: Mon Dec 07 2015 - 17:19:03 EST


On Monday, December 07, 2015 12:44:33 PM Ken Xue wrote:
> D3cold is only regarded as valid if the "_PR3" object is present
> for the given device after the commit <20dacb71ad28>
> (ACPI/PM: Reworkdevice power management to follow ACPI 6).
>
> But some old BIOS only defined "_PS3" for the D3COLD device.
> And old kernel also believes the device has "_PS3" is a
> D3COLD device.
>
> So, add some logics for supporting D3 COLD device for old BIOS
> which is compatible with earlier ACPI spec.
>
> Signed-off-by: Ken Xue <Ken.Xue@xxxxxxx>
> Reported-and-tested-by: Gang Long <Gang.Long@xxxxxxx>

Well, what really is the problem?

acpi_device_set_power() has a special case specifically for D3cold and
falls back to D3hot if D3cold has been requested but is not "valid".

> ---
> drivers/acpi/scan.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
> index 01136b8..85c16bb 100644
> --- a/drivers/acpi/scan.c
> +++ b/drivers/acpi/scan.c
> @@ -979,7 +979,9 @@ static void acpi_bus_get_power_flags(struct acpi_device *device)
> acpi_bus_init_power_state(device, i);
>
> INIT_LIST_HEAD(&device->power.states[ACPI_STATE_D3_COLD].resources);
> - if (!list_empty(&device->power.states[ACPI_STATE_D3_HOT].resources))
> + if (!list_empty(&device->power.states[ACPI_STATE_D3_HOT].resources) ||
> + ((acpi_gbl_FADT.header.revision < 6) &&
> + device->power.states[ACPI_STATE_D3_HOT].flags.explicit_set))
> device->power.states[ACPI_STATE_D3_COLD].flags.valid = 1;
>
> /* Set defaults for D0 and D3hot states (always valid) */
>

--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/