Re: [PATCH v4 2/2] leds: rt5033: Add RT5033 Flash led device driver

From: Jacek Anaszewski
Date: Tue Nov 10 2015 - 11:30:21 EST


Hi Ingi,

Thanks for the update. Please find my comments below.

On 11/10/2015 03:17 AM, Ingi Kim wrote:
This patch adds device driver of Richtek RT5033 PMIC.
The driver supports a current regulated output to drive white LEDs.

I would add here also the part from leds-rt5033.txt header.


Signed-off-by: Ingi Kim <ingi2.kim@xxxxxxxxxxx>
---
drivers/leds/Kconfig | 8 +
drivers/leds/Makefile | 1 +
drivers/leds/leds-rt5033.c | 502 +++++++++++++++++++++++++++++++++++++
include/linux/mfd/rt5033-private.h | 51 ++++
4 files changed, 562 insertions(+)
create mode 100644 drivers/leds/leds-rt5033.c

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 42990f2..29613e3 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -345,6 +345,14 @@ config LEDS_PCA963X
LED driver chip accessed via the I2C bus. Supported
devices include PCA9633 and PCA9634

+config LEDS_RT5033
+ tristate "LED support for RT5033 PMIC"
+ depends on LEDS_CLASS_FLASH && OF
+ depends on MFD_RT5033
+ help
+ This option enables support for on-chip LED driver on
+ RT5033 PMIC.
+
config LEDS_WM831X_STATUS
tristate "LED support for status LEDs on WM831x PMICs"
depends on LEDS_CLASS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index b503f92..bcc4d93 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_LEDS_COBALT_QUBE) += leds-cobalt-qube.o
obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o
obj-$(CONFIG_LEDS_SUNFIRE) += leds-sunfire.o
obj-$(CONFIG_LEDS_PCA9532) += leds-pca9532.o
+obj-$(CONFIG_LEDS_RT5033) += leds-rt5033.o
obj-$(CONFIG_LEDS_GPIO_REGISTER) += leds-gpio-register.o
obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
obj-$(CONFIG_LEDS_LP3944) += leds-lp3944.o
diff --git a/drivers/leds/leds-rt5033.c b/drivers/leds/leds-rt5033.c
new file mode 100644
index 0000000..eb89731
--- /dev/null
+++ b/drivers/leds/leds-rt5033.c
@@ -0,0 +1,502 @@
+/*
+ * led driver for RT5033
+ *
+ * Copyright (C) 2015 Samsung Electronics, Co., Ltd.
+ * Ingi Kim <ingi2.kim@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/led-class-flash.h>
+#include <linux/mfd/rt5033.h>
+#include <linux/mfd/rt5033-private.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+
+#define RT5033_LED_FLASH_TIMEOUT_MIN 64000
+#define RT5033_LED_FLASH_TIMEOUT_STEP 32000
+#define RT5033_LED_FLASH_BRIGHTNESS_MIN 50000
+#define RT5033_LED_FLASH_BRIGHTNESS_MAX_1CH 600000
+#define RT5033_LED_FLASH_BRIGHTNESS_MAX_2CH 800000
+#define RT5033_LED_FLASH_BRIGHTNESS_STEP 25000
+#define RT5033_LED_TORCH_BRIGHTNESS_MIN 12500
+#define RT5033_LED_TORCH_BRIGHTNESS_STEP 12500
+
+/* Macro to get offset of rt5033_led_config_data */
+#define RT5033_LED_CONFIG_DATA_OFFSET(val, step, min) (((val) - (min)) \
+ / (step))
+#define MIN(a, b) ((a) > (b) ? (b) : (a))

Please use min() macro from include/linux/kernel.h

+#define FLED1_IOUT (BIT(0))
+#define FLED2_IOUT (BIT(1))
+
+enum rt5033_fled {
+ FLED1,
+ FLED2,
+};
+
+struct rt5033_sub_led {
+ enum rt5033_fled fled_id;
+ struct led_classdev_flash fled_cdev;
+ struct work_struct work_brightness_set;
+
+ u32 torch_brightness;
+ u32 flash_brightness;
+ u32 flash_timeout;
+};
+
+/* RT5033 Flash led platform data */
+struct rt5033_led {
+ struct device *dev;
+ struct mutex lock;
+ struct regmap *regmap;
+ struct rt5033_sub_led sub_leds[2];
+
+ u32 iout_torch_max[2];
+ u32 iout_flash_max[2];

You're not using above two properties anywhere in the driver.

+ u8 fled_mask;
+
+ /* arrangement of current outputs */
+ bool iout_joint;
+};
+
+struct rt5033_led_config_data {
+ const char *label[2];
+ u32 flash_max_microamp[2];
+ u32 flash_max_timeout[2];
+ u32 torch_max_microamp[2];
+ u32 num_leds;
+};
+
+static struct rt5033_sub_led *flcdev_to_sub_led(
+ struct led_classdev_flash *fled_cdev)
+{
+ return container_of(fled_cdev, struct rt5033_sub_led, fled_cdev);
+}
+
+static struct rt5033_led *sub_led_to_led(struct rt5033_sub_led *sub_led)
+{
+ return container_of(sub_led, struct rt5033_led,
+ sub_leds[sub_led->fled_id]);
+}
+
+static int rt5033_fled_used(struct rt5033_led *led, enum rt5033_fled fled_id)
+{
+ u8 fled_bit = (fled_id == FLED1) ? FLED1_IOUT : FLED2_IOUT;
+
+ return led->fled_mask & fled_bit;
+}
+
+static void __rt5033_led_brightness_set(struct rt5033_led *led,
+ enum rt5033_fled fled_id,
+ enum led_brightness brightness)
+{
+ unsigned int val;
+
+ mutex_lock(&led->lock);
+
+ if (!brightness) {
+ regmap_read(led->regmap, RT5033_REG_FLED_FUNCTION1, &val);
+ val &= ~(rt5033_fled_used(led, fled_id));

Please change val type to the one corresponding with the device register
width, i.e. if the register is 8-bit wide, then val should be u8.
Please also calculate the value to write directly here, and not with use
of ~rt5033_fled_used, which returns int and is designed for different
purposes.

+ regmap_write(led->regmap, RT5033_REG_FLED_FUNCTION1, val);
+ } else {
+ regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION1,
+ RT5033_FLED_FUNC1_MASK, RT5033_FLED_PINCTRL |
+ rt5033_fled_used(led, fled_id));
+ regmap_update_bits(led->regmap, RT5033_REG_FLED_CTRL1,
+ RT5033_FLED_CTRL1_MASK,
+ (brightness - 1) << 4);
+ regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION2,
+ RT5033_FLED_FUNC2_MASK, RT5033_FLED_ENFLED);
+ }

How are you distinguishing between setting brightness for iout_joint
case and for individual LEDs? Have you tested this use case?
Even if you don't have a board with two separate LEDs,
you should be able to test two LED class devices with a single
connected LED.

+ mutex_unlock(&led->lock);
+}
+
+static void rt5033_led_brightness_set_work(struct work_struct *work)
+{
+ struct rt5033_sub_led *sub_led =
+ container_of(work, struct rt5033_sub_led, work_brightness_set);
+ struct rt5033_led *led = sub_led_to_led(sub_led);
+
+ __rt5033_led_brightness_set(led, sub_led->fled_id,
+ sub_led->torch_brightness);
+}
+
+static void rt5033_led_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
+ struct rt5033_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
+
+ sub_led->torch_brightness = brightness;
+ schedule_work(&sub_led->work_brightness_set);
+}
+
+static int rt5033_led_brightness_set_sync(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
+ struct rt5033_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
+ struct rt5033_led *led = sub_led_to_led(sub_led);
+
+ __rt5033_led_brightness_set(led, sub_led->fled_id, brightness);
+
+ return 0;
+}
+
+static int rt5033_led_flash_brightness_set(struct led_classdev_flash *fled_cdev,
+ u32 brightness)
+{
+ struct rt5033_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
+ struct rt5033_led *led = sub_led_to_led(sub_led);
+ u32 flash_brightness_offset;
+
+ mutex_lock(&led->lock);
+
+ flash_brightness_offset =
+ RT5033_LED_CONFIG_DATA_OFFSET(fled_cdev->brightness.val,
+ fled_cdev->brightness.step,
+ fled_cdev->brightness.min);

Please assign directly to sub_led->flash_brightness.

+ sub_led->flash_brightness = flash_brightness_offset;
+
+ mutex_unlock(&led->lock);
+
+ return 0;
+}
+
+static int rt5033_led_flash_timeout_set(struct led_classdev_flash *fled_cdev,
+ u32 timeout)
+{
+ struct rt5033_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
+ struct rt5033_led *led = sub_led_to_led(sub_led);
+ u32 flash_tm_offset;
+
+ mutex_lock(&led->lock);
+
+ flash_tm_offset =
+ RT5033_LED_CONFIG_DATA_OFFSET(fled_cdev->timeout.val,
+ fled_cdev->timeout.step,
+ fled_cdev->timeout.min);

Please assign directly to sub_led->flash_tm_offset.

+ sub_led->flash_timeout = flash_tm_offset;
+
+ mutex_unlock(&led->lock);
+
+ return 0;
+}
+
+static int rt5033_led_flash_strobe_set(struct led_classdev_flash *fled_cdev,
+ bool state)
+{
+ struct rt5033_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
+ struct rt5033_led *led = sub_led_to_led(sub_led);
+ enum rt5033_fled fled_id = sub_led->fled_id;
+ unsigned int val;

mutex_lock is missing here.

+
+ regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION2,
+ RT5033_FLED_FUNC2_MASK, 0x0);
+ if (state) {
+ regmap_update_bits(led->regmap, RT5033_REG_FLED_STROBE_CTRL2,
+ RT5033_FLED_STRBCTRL2_MASK,
+ sub_led->flash_timeout);
+ regmap_update_bits(led->regmap, RT5033_REG_FLED_STROBE_CTRL1,
+ RT5033_FLED_STRBCTRL1_MASK,
+ sub_led->flash_brightness);
+ regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION1,
+ RT5033_FLED_FUNC1_MASK,
+ RT5033_FLED_PINCTRL | RT5033_FLED_STRB_SEL |
+ rt5033_fled_used(led, fled_id));
+ regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION2,
+ RT5033_FLED_FUNC2_MASK, RT5033_FLED_ENFLED
+ | RT5033_FLED_SREG_STRB);
+
+ regmap_read(led->regmap, RT5033_REG_FLED_FUNCTION1, &val);
+ }
+
+ fled_cdev->led_cdev.brightness = LED_OFF;
+
+ mutex_unlock(&led->lock);
+
+ return 0;
+}
+
+static const struct led_flash_ops flash_ops = {
+ .flash_brightness_set = rt5033_led_flash_brightness_set,
+ .strobe_set = rt5033_led_flash_strobe_set,
+ .timeout_set = rt5033_led_flash_timeout_set,
+};
+
+static void rt5033_init_flash_properties(struct rt5033_sub_led *sub_led,
+ struct rt5033_led_config_data *led_cfg)
+{
+ struct led_classdev_flash *fled_cdev = &sub_led->fled_cdev;
+ struct rt5033_led *led = sub_led_to_led(sub_led);
+ struct led_flash_setting *tm_set, *fl_set;
+ enum rt5033_fled fled_id = sub_led->fled_id;
+
+ tm_set = &fled_cdev->timeout;
+ tm_set->min = RT5033_LED_FLASH_TIMEOUT_MIN;
+ tm_set->max = led_cfg->flash_max_timeout[fled_id];
+ tm_set->step = RT5033_LED_FLASH_TIMEOUT_STEP;
+ tm_set->val = tm_set->max;
+
+ fl_set = &fled_cdev->brightness;
+ fl_set->min = RT5033_LED_FLASH_BRIGHTNESS_MIN;
+ if (led->iout_joint)
+ fl_set->max = MIN(led_cfg->flash_max_microamp[FLED1] +
+ led_cfg->flash_max_microamp[FLED2],
+ RT5033_LED_FLASH_BRIGHTNESS_MAX_2CH);
+ else
+ fl_set->max = MIN(led_cfg->flash_max_microamp[fled_id],
+ RT5033_LED_FLASH_BRIGHTNESS_MAX_1CH);
+ fl_set->step = RT5033_LED_FLASH_BRIGHTNESS_STEP;
+ fl_set->val = fl_set->max;
+}
+
+static void rt5033_led_init_fled_cdev(struct rt5033_sub_led *sub_led,
+ struct rt5033_led_config_data *led_cfg)
+{
+ struct led_classdev_flash *fled_cdev;
+ struct led_classdev *led_cdev;
+ enum rt5033_fled fled_id = sub_led->fled_id;
+ u32 flash_tm_offset, flash_brightness_offset;
+
+ /* Initialize LED Flash class device */
+ fled_cdev = &sub_led->fled_cdev;
+ fled_cdev->ops = &flash_ops;
+ led_cdev = &fled_cdev->led_cdev;
+
+ led_cdev->name = led_cfg->label[fled_id];
+
+ led_cdev->brightness_set = rt5033_led_brightness_set;
+ led_cdev->brightness_set_sync = rt5033_led_brightness_set_sync;
+ led_cdev->max_brightness = RT5033_LED_CONFIG_DATA_OFFSET(
+ led_cfg->torch_max_microamp[fled_id],
+ RT5033_LED_TORCH_BRIGHTNESS_STEP,
+ RT5033_LED_TORCH_BRIGHTNESS_MIN);
+
+ led_cdev->flags |= LED_DEV_CAP_FLASH;
+ INIT_WORK(&sub_led->work_brightness_set,
+ rt5033_led_brightness_set_work);

Please rebase your code on top of LED tree devel branch:

git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds.git

Those LED core changes will be applied to the for-next branch
in the beginning of the next week, and they'll allow to get rid of
work queues and brightness_set_sync ops from drivers. Please refer
to the patches that remove related code from leds-max77693.c to
find out how to adapt your driver to benefit from LED core
optimizations.


+ rt5033_init_flash_properties(sub_led, led_cfg);
+
+ flash_tm_offset = RT5033_LED_CONFIG_DATA_OFFSET(fled_cdev->timeout.val,
+ fled_cdev->timeout.step,
+ fled_cdev->timeout.min);
+ flash_brightness_offset =
+ RT5033_LED_CONFIG_DATA_OFFSET(fled_cdev->brightness.val,
+ fled_cdev->brightness.step,
+ fled_cdev->brightness.min);
+
+ sub_led->flash_timeout = flash_tm_offset;
+ sub_led->flash_brightness = flash_brightness_offset;
+}
+
+static int rt5033_led_parse_dt(struct rt5033_led *led, struct device *dev,
+ struct rt5033_led_config_data *cfg,
+ struct device_node **sub_nodes)
+{
+ struct device_node *np = dev->of_node;
+ struct device_node *child_node;
+ struct rt5033_sub_led *sub_leds = led->sub_leds;
+ struct property *prop;
+ u32 led_sources[2];
+ enum rt5033_fled fled_id;
+ int i, ret;
+
+ if (!np)
+ return -ENXIO;

Probe has been called, so dev->of_node must have been present.
Please remove above guard.

+ for_each_available_child_of_node(np, child_node) {
+ prop = of_find_property(child_node, "led-sources", NULL);
+ if (prop) {
+ const u32 *srcs = NULL;

This should be:

const __be32 *srcs = NULL;

sparse tool detects this type of problems [1].

+
+ for (i = 0; i < ARRAY_SIZE(led_sources); ++i) {
+ srcs = of_prop_next_u32(prop, srcs,
+ &led_sources[i]);
+ if (!srcs)
+ break;
+ }
+ } else {
+ dev_err(dev, "led-sources DT property missing\n");
+ ret = -EINVAL;
+ goto err_parse_dt;
+ }
+
+ if (i == 2) {
+ fled_id = FLED1;
+ led->fled_mask = FLED1_IOUT | FLED2_IOUT;
+ } else if (led_sources[0] == FLED1) {
+ fled_id = FLED1;
+ led->fled_mask |= FLED1_IOUT;
+ } else if (led_sources[0] == FLED2) {
+ fled_id = FLED2;
+ led->fled_mask |= FLED2_IOUT;
+ } else {
+ dev_err(dev, "Wrong led-sources DT property value.\n");
+ ret = -EINVAL;
+ goto err_parse_dt;
+ }
+
+ if (sub_nodes[fled_id]) {
+ dev_err(dev,
+ "Conflicting \"led-sources\" DT properties\n");
+ ret = -EINVAL;
+ goto err_parse_dt;
+ }
+
+ sub_nodes[fled_id] = child_node;
+ sub_leds[fled_id].fled_id = fled_id;
+
+ cfg->label[fled_id] =
+ of_get_property(child_node, "label", NULL) ? :
+ child_node->name;
+
+ ret = of_property_read_u32(child_node, "led-max-microamp",
+ &cfg->torch_max_microamp[fled_id]);
+ if (ret) {
+ dev_err(dev, "failed to parse led-max-microamp\n");
+ goto err_parse_dt;
+ }
+
+ ret = of_property_read_u32(child_node, "flash-max-microamp",
+ &cfg->flash_max_microamp[fled_id]);
+ if (ret) {
+ dev_err(dev, "failed to parse flash-max-microamp\n");
+ goto err_parse_dt;
+ }
+
+ ret = of_property_read_u32(child_node, "flash-max-timeout-us",
+ &cfg->flash_max_timeout[fled_id]);
+ if (ret) {
+ dev_err(dev, "failed to parse flash-max-timeout-us\n");
+ goto err_parse_dt;
+ }
+
+ if (++cfg->num_leds == 2 ||
+ (rt5033_fled_used(led, FLED1) &&
+ rt5033_fled_used(led, FLED2))) {
+ of_node_put(child_node);
+ break;
+ }
+ }
+
+ if (cfg->num_leds == 0) {
+ dev_err(dev, "No DT child node found for connected LED(s).\n");
+ return -EINVAL;
+ }
+
+ return 0;
+
+err_parse_dt:
+ of_node_put(child_node);
+ return ret;
+}
+
+static int rt5033_led_probe(struct platform_device *pdev)
+{
+ struct rt5033_dev *rt5033 = dev_get_drvdata(pdev->dev.parent);
+ struct rt5033_led *led;
+ struct rt5033_sub_led *sub_leds;
+ struct device_node *sub_nodes[2] = {};
+ struct rt5033_led_config_data led_cfg = {};
+ int init_fled_cdev[2], i, ret;
+
+ led = devm_kzalloc(&pdev->dev, sizeof(*led), GFP_KERNEL);
+ if (!led)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, led);
+ led->dev = &pdev->dev;
+ led->regmap = rt5033->regmap;
+ sub_leds = led->sub_leds;
+
+ ret = rt5033_led_parse_dt(led, &pdev->dev, &led_cfg, sub_nodes);
+ if (ret)
+ return ret;
+
+ if (led_cfg.num_leds == 1 && rt5033_fled_used(led, FLED1) &&
+ rt5033_fled_used(led, FLED2))
+ led->iout_joint = true;
+
+ mutex_init(&led->lock);
+
+ init_fled_cdev[FLED1] =
+ led->iout_joint || rt5033_fled_used(led, FLED1);
+ init_fled_cdev[FLED2] =
+ !led->iout_joint && rt5033_fled_used(led, FLED2);
+
+ for (i = FLED1; i <= FLED2; ++i) {
+ if (!init_fled_cdev[i])
+ continue;
+
+ rt5033_led_init_fled_cdev(&sub_leds[i], &led_cfg);
+ ret = led_classdev_flash_register(led->dev,
+ &sub_leds[i].fled_cdev);
+ if (ret < 0) {
+ if (i == FLED2)
+ goto err_register_led2;
+ else
+ goto err_register_led1;
+ }
+ }
+
+ regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION1,
+ RT5033_FLED_FUNC1_MASK, RT5033_FLED_RESET);
+
+ return 0;
+
+err_register_led2:
+ led_classdev_flash_unregister(&sub_leds[FLED1].fled_cdev);
+err_register_led1:
+ mutex_destroy(&led->lock);
+
+ return ret;
+}
+
+static int rt5033_led_remove(struct platform_device *pdev)
+{
+ struct rt5033_led *led = platform_get_drvdata(pdev);
+ struct rt5033_sub_led *sub_leds = led->sub_leds;
+
+ if (led->iout_joint || rt5033_fled_used(led, FLED1)) {
+ led_classdev_flash_unregister(&sub_leds[FLED1].fled_cdev);
+ cancel_work_sync(&sub_leds[FLED1].work_brightness_set);
+ }
+
+ if (!led->iout_joint && rt5033_fled_used(led, FLED2)) {
+ led_classdev_flash_unregister(&sub_leds[FLED2].fled_cdev);
+ cancel_work_sync(&sub_leds[FLED2].work_brightness_set);
+ }
+
+ mutex_destroy(&led->lock);
+
+ return 0;
+}
+
+static const struct of_device_id rt5033_led_match[] = {
+ { .compatible = "richtek,rt5033-led", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, rt5033_led_match);
+
+static struct platform_driver rt5033_led_driver = {
+ .driver = {
+ .name = "rt5033-led",
+ .of_match_table = rt5033_led_match,
+ },
+ .probe = rt5033_led_probe,
+ .remove = rt5033_led_remove,
+};
+module_platform_driver(rt5033_led_driver);
+
+MODULE_AUTHOR("Ingi Kim <ingi2.kim@xxxxxxxxxxx>");
+MODULE_DESCRIPTION("Richtek RT5033 LED driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:rt5033-led");
diff --git a/include/linux/mfd/rt5033-private.h b/include/linux/mfd/rt5033-private.h
index 1b63fc2..b20c7e4 100644
--- a/include/linux/mfd/rt5033-private.h
+++ b/include/linux/mfd/rt5033-private.h
@@ -93,6 +93,57 @@ enum rt5033_reg {
#define RT5033_RT_CTRL1_UUG_MASK 0x02
#define RT5033_RT_HZ_MASK 0x01

+/* RT5033 FLED Function1 register */
+#define RT5033_FLED_FUNC1_MASK 0x97
+#define RT5033_FLED_EN_LEDCS1 0x01
+#define RT5033_FLED_EN_LEDCS2 0x02
+#define RT5033_FLED_STRB_SEL 0x04
+#define RT5033_FLED_PINCTRL 0x10
+#define RT5033_FLED_RESET 0x80
+
+/* RT5033 FLED Function2 register */
+#define RT5033_FLED_FUNC2_MASK 0x81
+#define RT5033_FLED_ENFLED 0x01
+#define RT5033_FLED_SREG_STRB 0x80
+
+/* RT5033 FLED Strobe Control1 */
+#define RT5033_FLED_STRBCTRL1_MASK 0xFF
+#define RT5033_FLED_STRBCTRL1_TM_CUR_MAX 0xE0
+#define RT5033_FLED_STRBCTRL1_FL_CUR_DEF 0x0D
+#define RT5033_FLED_STRBCTRL1_FL_CUR_MAX 0x1F
+
+/* RT5033 FLED Strobe Control2 */
+#define RT5033_FLED_STRBCTRL2_MASK 0x3F
+#define RT5033_FLED_STRBCTRL2_TM_DEF 0x0F
+#define RT5033_FLED_STRBCTRL2_TM_MAX 0x3F
+
+/* RT5033 FLED Control1 */
+#define RT5033_FLED_CTRL1_MASK 0xF7
+#define RT5033_FLED_CTRL1_TORCH_CUR_DEF 0x20
+#define RT5033_FLED_CTRL1_TORCH_CUR_MAX 0xF0
+#define RT5033_FLED_CTRL1_LBP_DEF 0x02
+#define RT5033_FLED_CTRL1_LBP_MAX 0x07
+
+/* RT5033 FLED Control2 */
+#define RT5033_FLED_CTRL2_MASK 0xFF
+#define RT5033_FLED_CTRL2_VMID_DEF 0x37
+#define RT5033_FLED_CTRL2_VMID_MAX 0x3F
+#define RT5033_FLED_CTRL2_TRACK_ALIVE 0x40
+#define RT5033_FLED_CTRL2_MID_TRACK 0x80
+
+/* RT5033 FLED Control4 */
+#define RT5033_FLED_CTRL4_MASK 0xE0
+#define RT5033_FLED_CTRL4_RESV 0x14
+#define RT5033_FLED_CTRL4_VTRREG_DEF 0x40
+#define RT5033_FLED_CTRL4_VTRREG_MAX 0x60
+#define RT5033_FLED_CTRL4_TRACK_CLK 0x80
+
+/* RT5033 FLED Control5 */
+#define RT5033_FLED_CTRL5_MASK 0xC0
+#define RT5033_FLED_CTRL5_RESV 0x10
+#define RT5033_FLED_CTRL5_TA_GOOD 0x40
+#define RT5033_FLED_CTRL5_TA_EXIST 0x80
+
/* RT5033 control register */
#define RT5033_CTRL_FCCM_BUCK_MASK 0x00
#define RT5033_CTRL_BUCKOMS_MASK 0x01


[1] Documentation/sparse.txt

--
Best Regards,
Jacek Anaszewski
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/