[PATCH v3 1/3] devicetree: bindings: Add optional dynamic-power-coefficient property

From: Punit Agrawal
Date: Mon Nov 09 2015 - 12:30:52 EST


The dynamic power consumption of a device is proportional to the
square of voltage (V) and the clock frequency (f). It can be expressed as

Pdyn = dynamic-power-coefficient * V^2 * f.

The coefficient represents the running time dynamic power consumption in
units of mw/MHz/uVolt^2 and can be used in the above formula to
calculate the dynamic power in mW.

Signed-off-by: Punit Agrawal <punit.agrawal@xxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
---
Documentation/devicetree/bindings/arm/cpus.txt | 17 +++++++++++++++++
1 file changed, 17 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
index 91e6e5c..c33362d 100644
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
@@ -240,6 +240,23 @@ nodes to be present and contain the properties described below.
Definition: Specifies the syscon node controlling the cpu core
power domains.

+ - dynamic-power-coefficient
+ Usage: optional
+ Value type: <prop-encoded-array>
+ Definition: A u32 value that represents the running time dynamic
+ power coefficient in units of mW/MHz/uVolt^2. The
+ coefficient can either be calculated from power
+ measurements or derived by analysis.
+
+ The dynamic power consumption of the CPU is
+ proportional to the square of the Voltage (V) and
+ the clock frequency (f). The coefficient is used to
+ calculate the dynamic power as below -
+
+ Pdyn = dynamic-power-coefficient * V^2 * f
+
+ where voltage is in uV, frequency is in MHz.
+
Example 1 (dual-cluster big.LITTLE system 32-bit):

cpus {
--
2.5.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/