[PATCH v2 10/19] ARC: [plat-eznps] Add eznps board defconfig and dts

From: Noam Camus
Date: Sat Nov 07 2015 - 05:58:04 EST


From: Noam Camus <noamc@xxxxxxxxxx>

Adding default configuration file and DTS file

Signed-off-by: Noam Camus <noamc@xxxxxxxxxx>
---
arch/arc/boot/dts/eznps.dts | 76 +++++++++++++++++++++++++++++++++++
arch/arc/configs/nps_defconfig | 85 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 161 insertions(+), 0 deletions(-)
create mode 100644 arch/arc/boot/dts/eznps.dts
create mode 100644 arch/arc/configs/nps_defconfig

diff --git a/arch/arc/boot/dts/eznps.dts b/arch/arc/boot/dts/eznps.dts
new file mode 100644
index 0000000..4d4832a
--- /dev/null
+++ b/arch/arc/boot/dts/eznps.dts
@@ -0,0 +1,76 @@
+/*
+ * Copyright(c) 2015 EZchip Technologies.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ */
+
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "ezchip,arc-nps";
+ clock-frequency = <83333333>; /* 83.333333 MHZ */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&intc>;
+ present-cpus = "0-1,16-17";
+ possible-cpus = "0-4095";
+
+ chosen {
+ bootargs = "earlycon=uart8250,mmio32be,0xf7209000,115200n8 console=ttyS0,115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>; /* 512M */
+ };
+
+ fpga {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* child and parent address space 1:1 mapped */
+ ranges;
+
+ intc: interrupt-controller {
+ compatible = "ezchip,nps400-ic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ timer {
+ compatible = "ezchip,nps400-timer";
+ };
+
+ uart@f7209000 {
+ compatible = "snps,dw-apb-uart";
+ device_type = "serial";
+ reg = <0xf7209000 0x100>;
+ interrupts = <6>;
+ clock-frequency = <83333333>;
+ baud = <115200>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ native-endian;
+ };
+
+ ethernet@f7470000 {
+ compatible = "ezchip,nps-mgt-enet";
+ reg = <0xf7470000 0x1940>;
+ interrupts = <7>;
+ mac-address = [ 00 C0 00 F0 04 03 ];
+ };
+ };
+};
diff --git a/arch/arc/configs/nps_defconfig b/arch/arc/configs/nps_defconfig
new file mode 100644
index 0000000..13a67ac
--- /dev/null
+++ b/arch/arc/configs/nps_defconfig
@@ -0,0 +1,85 @@
+CONFIG_CROSS_COMPILE="arceb-linux-"
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARC_PLAT_EZNPS=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=4096
+CONFIG_ARC_CACHE_LINE_SHIFT=5
+# CONFIG_ARC_CACHE_PAGES is not set
+# CONFIG_ARC_HAS_LLSC is not set
+CONFIG_ARC_VMALLOC_SIZE=192
+CONFIG_ARC_EMUL_UNALIGNED=y
+CONFIG_ARC_UBOOT_SUPPORT=y
+CONFIG_PREEMPT=y
+CONFIG_NET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=2048
+CONFIG_NETDEVICES=y
+CONFIG_NETCONSOLE=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_ENABLE_DEFAULT_TRACERS=y
--
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/