Re: [Linaro-acpi] [PATCH v8 5/5] Watchdog: introduce ARM SBSA watchdog driver

From: Fu Wei
Date: Thu Nov 05 2015 - 09:03:43 EST


Hi Timur

On 5 November 2015 at 21:47, Timur Tabi <timur@xxxxxxxxxxxxxx> wrote:
> Guenter Roeck wrote:
>>
>> I would feel much more comfortable if the driver would just use the
>> standard
>> watchdog timeout and live with (worst case) 20 seconds timeout for now.
>
>
> Actually, I'm wondering where the 20 seconds comes from. When I load my
> driver on our hardware, it calculates a maximum timeout of 214 seconds, and
> that's just to WS0.

SBSA 2.3 Page 23 :
Note: the watchdog offset register is 32 bits wide. This gives a
maximum watch period of around 10s at a system
counter frequency of 400MHz. If a larger watch period is required then
the compare value can be programmed
directly into the compare value register.

214s means your system counter is approximately at 20MHz which is in
the range of (10MHz ~ 400MHz)

SBSA 2.3 Page 13 :
The System Counter (of the Generic Timer) shall run at a minimum
frequency of 10MHz and maximum of
400MHz.

>
> --
> Sent by an employee of the Qualcomm Innovation Center, Inc.
> The Qualcomm Innovation Center, Inc. is a member of the
> Code Aurora Forum, hosted by The Linux Foundation.



--
Best regards,

Fu Wei
Software Engineer
Red Hat Software (Beijing) Co.,Ltd.Shanghai Branch
Ph: +86 21 61221326(direct)
Ph: +86 186 2020 4684 (mobile)
Room 1512, Regus One Corporate Avenue,Level 15,
One Corporate Avenue,222 Hubin Road,Huangpu District,
Shanghai,China 200021
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/