Re: [PATCH v2 2/2] watchdog: imx2_wdt: add set_pretimeout interface

From: Guenter Roeck
Date: Tue Nov 03 2015 - 02:48:37 EST


On 11/02/2015 10:11 PM, Robin Gong wrote:
Enable set_pretimeout interface and trigger the pretimeout interrupt before
watchdog timeout event happen.

Signed-off-by: Robin Gong <b38343@xxxxxxxxxxxxx>
---
drivers/watchdog/imx2_wdt.c | 58 ++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 57 insertions(+), 1 deletion(-)

diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c
index 0bb1a1d..bd42857 100644
--- a/drivers/watchdog/imx2_wdt.c
+++ b/drivers/watchdog/imx2_wdt.c
@@ -24,6 +24,7 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/init.h>
+#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/jiffies.h>
#include <linux/kernel.h>
@@ -52,12 +53,18 @@
#define IMX2_WDT_WRSR 0x04 /* Reset Status Register */
#define IMX2_WDT_WRSR_TOUT (1 << 1) /* -> Reset due to Timeout */

+#define IMX2_WDT_WICR 0x06 /*Interrupt Control Register*/
+#define IMX2_WDT_WICR_WIE (1 << 15) /* -> Interrupt Enable */
+#define IMX2_WDT_WICR_WTIS (1 << 14) /* -> Interrupt Status */
+#define IMX2_WDT_WICR_WICT (0xFF) /* Watchdog Interrupt Timeout */

Unnecessary ( )

+
#define IMX2_WDT_WMCR 0x08 /* Misc Register */

#define IMX2_WDT_MAX_TIME 128
#define IMX2_WDT_DEFAULT_TIME 60 /* in seconds */

#define WDOG_SEC_TO_COUNT(s) ((s * 2 - 1) << 8)
+#define WDOG_SEC_TO_PRECOUNT(s) ((s) * 2) /* set WDOG pre timeout count*/

struct imx2_wdt_device {
struct clk *clk;
@@ -80,7 +87,8 @@ MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds (default="

static const struct watchdog_info imx2_wdt_info = {
.identity = "imx2+ watchdog",
- .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
+ .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE
+ | WDIOF_PRETIMEOUT,
};

static int imx2_restart_handler(struct notifier_block *this, unsigned long mode,
@@ -207,12 +215,49 @@ static inline void imx2_wdt_ping_if_active(struct watchdog_device *wdog)
}
}

+static int imx2_wdt_set_pretimeout(struct watchdog_device *wdog,
+ unsigned int new_timeout)
+{
+ struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog);
+ u32 val;
+
+ regmap_read(wdev->regmap, IMX2_WDT_WICR, &val);
+ /* set the new pre-timeout value in the WSR */
+ val &= ~IMX2_WDT_WICR_WICT;
+ val |= WDOG_SEC_TO_PRECOUNT(new_timeout);

Looking into this, I think we need more information in the first patch.
Specifically, we need a value for max_pretimeout and validate it
(new_timeout must be smaller than 128 to avoid overflows, independent
of the maximum timeout).

+
+ regmap_write(wdev->regmap, IMX2_WDT_WICR, val | IMX2_WDT_WICR_WIE);
+
+ wdog->pretimeout = new_timeout;
+
+ return 0;
+}
+
+static irqreturn_t imx2_wdt_isr(int irq, void *dev_id)
+{
+ struct platform_device *pdev = dev_id;
+ struct watchdog_device *wdog = platform_get_drvdata(pdev);
+ struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog);
+ u32 val;
+
+ regmap_read(wdev->regmap, IMX2_WDT_WICR, &val);
+ if (val & IMX2_WDT_WICR_WTIS) {
+ /*clear interrupt status bit*/
+ regmap_write(wdev->regmap, IMX2_WDT_WICR, val);
+ panic("pre-timeout:%d, %d Seconds remained\n", wdog->pretimeout,

"seconds" - no capital 'S'.

+ wdog->timeout - wdog->pretimeout);
+ }
+
+ return IRQ_HANDLED;
+}
+
static const struct watchdog_ops imx2_wdt_ops = {
.owner = THIS_MODULE,
.start = imx2_wdt_start,
.stop = imx2_wdt_stop,
.ping = imx2_wdt_ping,
.set_timeout = imx2_wdt_set_timeout,
+ .set_pretimeout = imx2_wdt_set_pretimeout,
};

static const struct regmap_config imx2_wdt_regmap_config = {
@@ -229,6 +274,7 @@ static int __init imx2_wdt_probe(struct platform_device *pdev)
struct resource *res;
void __iomem *base;
int ret;
+ int irq;
u32 val;

wdev = devm_kzalloc(&pdev->dev, sizeof(*wdev), GFP_KERNEL);
@@ -294,6 +340,16 @@ static int __init imx2_wdt_probe(struct platform_device *pdev)
goto disable_clk;
}

+ irq = platform_get_irq(pdev, 0);
+ if (irq > 0) {
+ ret = devm_request_irq(&pdev->dev, irq, imx2_wdt_isr, 0,
+ dev_name(&pdev->dev), pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "can't get irq %d\n", irq);
+ goto disable_clk;
+ }
+ }
+
wdev->restart_handler.notifier_call = imx2_restart_handler;
wdev->restart_handler.priority = 128;
ret = register_restart_handler(&wdev->restart_handler);


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/