Re: [PATCH V2 1/3] dma: add Qualcomm Technologies HIDMA management driver

From: Rob Herring
Date: Mon Nov 02 2015 - 10:57:45 EST


On Mon, Nov 2, 2015 at 12:07 AM, Sinan Kaya <okaya@xxxxxxxxxxxxxx> wrote:
> The Qualcomm Technologies HIDMA device has been designed
> to support virtualization technology. The driver has been
> divided into two to follow the hardware design. The management
> driver is executed in hypervisor context and is the main
> management entity for all channels provided by the device.
> The channel driver is executed in the hypervisor/guest OS
> context.
>
> All channel devices get probed in the hypervisor
> context during power up. They show up as DMA engine
> channels. Then, before starting the virtualization; each
> channel device is unbound from the hypervisor by VFIO
> and assigned to the guest machine for control.
>
> This management driver will be used by the system
> admin to monitor/reset the execution state of the DMA
> channels. This will be the management interface.
>
> Signed-off-by: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
> ---
> .../devicetree/bindings/dma/qcom_hidma_mgmt.txt | 56 ++
> drivers/dma/Kconfig | 11 +
> drivers/dma/Makefile | 1 +
> drivers/dma/qcom_hidma_mgmt.c | 747 +++++++++++++++++++++
> 4 files changed, 815 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt
> create mode 100644 drivers/dma/qcom_hidma_mgmt.c
>
> diff --git a/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt b/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt
> new file mode 100644
> index 0000000..514d37d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt
> @@ -0,0 +1,56 @@
> +Qualcomm Technologies HIDMA Management interface
> +
> +The Qualcomm Technologies HIDMA device has been designed
> +to support virtualization technology. The driver has been
> +divided into two to follow the hardware design. The management
> +driver is executed in hypervisor context and is the main
> +management entity for all channels provided by the device.
> +The channel driver is executed in the hypervisor/guest OS
> +context.

This doesn't really explain what the block is.

> +All channel devices get probed in the hypervisor
> +context during power up. They show up as DMA engine
> +DMA channels. Then, before starting the virtualization; each
> +channel device is unbound from the hypervisor by VFIO
> +and assign to the guest machine for control.
> +
> +This management driver will be used by the system
> +admin to monitor/reset the execution state of the DMA
> +channels. This will be the management interface.
> +
> +
> +Required properties:
> +- compatible: must contain "qcom,hidma-mgmt"

Please make this more specific. It doesn't match your example either.
Unless "1.0" type versioning is tightly controlled and defined,
version numbers are usually not a good practice.

> +- reg: Address range for DMA device
> +- dma-channels: Number of channels supported by this DMA controller.
> +- max-write-burst-bytes: Maximum write burst in bytes. A memcpy requested is
> + fragmented to multiples of this amount.
> +- max-read-burst-bytes: Maximum read burst in bytes. A memcpy request is
> + fragmented to multiples of this amount.
> +- max-write-transactions: Maximum write transactions to perform in a burst
> +- max-read-transactions: Maximum read transactions to perform in a burst

This would be a function of burst-bytes and bus width. Are you sure
you don't me number of outstanding transactions which is a common
parameter for AXI bus peripherals.

> +- channel-reset-timeout: Channel reset timeout for this SOC.

Please add units to property name.

> +- channel-priority: Priority of the channel.
> + Each dma channel share the same HW bandwidth with other dma channels.
> + If two requests reach to the HW at the same time from a low priority and
> + high priority channel, high priority channel will claim the bus.
> + 0=low priority, 1=high priority
> +- channel-weight: Round robin weight of the channel
> + Since there are only two priority levels supported, scheduling among
> + the equal priority channels is done via weights.
> +
> +Example:
> +
> + hidma-mgmt@f9984000 = {
> + compatible = "qcom,hidma-mgmt-1.0";
> + reg = <0xf9984000 0x15000>;
> + dma-channels = 6;
> + max-write-burst-bytes = 1024;
> + max-read-burst-bytes = 1024;
> + max-write-transactions = 31;
> + max-read-transactions = 31;
> + channel-reset-timeout = 0x500;
> + channel-priority = < 1 1 0 0 0 0>;
> + channel-weight = < 1 13 10 3 4 5>;
> + };
> +
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/