[RFC PATCH net-next 4/6] net: dsa: mv88e6060: use the correct bit shift for mac0

From: Neil Armstrong
Date: Mon Nov 02 2015 - 05:57:44 EST


According to the mv88e6060 datasheet, the first mac byte must
be at position 9 instead of 8 since the bit 8 is used to select
if the mac address must differ for each port for Pause frames.
Use the correct shift and set the same mac address for all port.

Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
---
drivers/net/dsa/mv88e6060.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/dsa/mv88e6060.c b/drivers/net/dsa/mv88e6060.c
index ba1899e..1ccfd7a 100644
--- a/drivers/net/dsa/mv88e6060.c
+++ b/drivers/net/dsa/mv88e6060.c
@@ -188,7 +188,8 @@ static int mv88e6060_setup(struct dsa_switch *ds)

static int mv88e6060_set_addr(struct dsa_switch *ds, u8 *addr)
{
- REG_WRITE(REG_GLOBAL, 0x01, (addr[0] << 8) | addr[1]);
+ /* Use the same MAC Address as FD Pause frames for all ports */
+ REG_WRITE(REG_GLOBAL, 0x01, (addr[0] << 9) | addr[1]);
REG_WRITE(REG_GLOBAL, 0x02, (addr[2] << 8) | addr[3]);
REG_WRITE(REG_GLOBAL, 0x03, (addr[4] << 8) | addr[5]);

--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/