[PATCH RESEND 02/16] Documentation: dt-bindings: backlight: add TI LMU backlight binding information

From: Milo Kim
Date: Mon Nov 02 2015 - 00:25:38 EST


LM3532, LM3631, LM3632, LM3633, LM3695 and LM3697 use common dt-bindings
for describing device.

Cc: devicetree@xxxxxxxxxxxxxxx
Cc: Jingoo Han <jingoohan1@xxxxxxxxx>
Cc: Lee Jones <lee.jones@xxxxxxxxxx>
Cc: linux-kernel@xxxxxxxxxxxxxxx
Signed-off-by: Milo Kim <milo.kim@xxxxxx>
---
.../bindings/video/backlight/ti-lmu-backlight.txt | 67 ++++++++++++++++++++++
1 file changed, 67 insertions(+)
create mode 100644 Documentation/devicetree/bindings/video/backlight/ti-lmu-backlight.txt

diff --git a/Documentation/devicetree/bindings/video/backlight/ti-lmu-backlight.txt b/Documentation/devicetree/bindings/video/backlight/ti-lmu-backlight.txt
new file mode 100644
index 0000000..27b0036
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/backlight/ti-lmu-backlight.txt
@@ -0,0 +1,67 @@
+TI LMU backlight device tree bindings
+
+Required properties:
+ - compatible: Should be one of lists below.
+ "ti,lm3532-backlight"
+ "ti,lm3631-backlight"
+ "ti,lm3632-backlight"
+ "ti,lm3633-backlight"
+ "ti,lm3695-backlight"
+ "ti,lm3697-backlight"
+
+Optional properties:
+ There are two backlight control mode. One is I2C, the other is PWM mode.
+ Following properties are only specified in PWM mode.
+ Please note that LMU backlight device can have only one PWM channel.
+
+ - pwms: OF device-tree PWM specification.
+ - pwm-names: a list of names for the PWM devices specified in the "pwms"
+ property.
+
+ For the PWM user nodes, please refer to [1].
+
+Child nodes:
+ LMU backlight is represented as sub-nodes of the TI LMU device [2].
+ So, LMU backlight should have more than one backlight child node.
+ Each node exactly matches with backlight control bank configuration.
+ Maximum numbers of child nodes depend on the device.
+ 1 = LM3631, LM3632, LM3695
+ 2 = LM3633, LM3697
+ 3 = LM3532
+
+ Required property of a child node:
+ - hvled1-used, hvled2-used, hvled3-used:
+ High voltage backlight strings configuration. Type is <boolean>.
+ Please describe which output backlight string is used.
+ Please refer to the datasheets [3].
+
+ Optional properties of a child node:
+ - backlight-name: Name string for backlight device identification.
+ It is used for creating backlight sysfs,
+ /sys/class/backlight/<backlight-name>/.
+ - backlight-max-microamp: Max current setting. Type is <u32>.
+ Unit is microampere.
+ Range is from 5000 to 30000.
+ - initial-brightness: Backlight initial brightness value. Type is <u32>.
+ It is set as soon as backlight device is created.
+ 0 ~ 2047 = LM3631, LM3632, LM3633, LM3695 and LM3697
+ 0 ~ 255 = LM3532
+ - ramp-up-msec, ramp-down-msec: Light dimming effect properties.
+ Type is <u32>. Unit is millisecond.
+ 0 ~ 65 msec = LM3532
+ 0 ~ 4000 msec = LM3631
+ 0 ~ 16000 msec = LM3633 and LM3697
+ - pwm-period: PWM period. Only valid in PWM brightness mode.
+ Type is <u32>. If this property is missing, then control
+ mode is set to I2C by default.
+
+Examples: Please refer to ti-lmu dt-bindings. [2].
+
+[1] Documentation/devicetree/bindings/pwm/pwm.txt
+[2] Documentation/devicetree/bindings/mfd/ti-lmu.txt
+[3] LM3532: http://www.ti.com/product/LM3532/datasheet
+ LM3631: http://www.ti.com/product/LM3631/datasheet
+ LM3632: http://www.ti.com/product/LM3632A/datasheet
+ LM3633: http://www.ti.com/product/LM3633/datasheet
+ LM3695: Datasheet is not opened yet, but only two strings are used.
+ LM3697: http://www.ti.com/product/LM3697/datasheet
--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/