Re: [PATCH v2 7/7] PCI: Set NumVFs before computing how many buses VFs require

From: Alexander Duyck
Date: Fri Oct 30 2015 - 12:04:01 EST


On 10/29/2015 10:22 PM, Wei Yang wrote:
On Thu, Oct 29, 2015 at 05:23:36PM -0500, Bjorn Helgaas wrote:
From: Alexander Duyck <aduyck@xxxxxxxxxxxx>

VF bus numbers depend on the First VF Offset and VF Stride, and per
sections 3.3.9 and 3.3.10 of the SR-IOV spec r1.1, these depend on the
NumVF value.

Wait until after we set NumVFs to compute and validate the bus number of
the last VF.

[bhelgaas: changelog, add spec reference, split to separate patch for
reviewability]
Signed-off-by: Alexander Duyck <aduyck@xxxxxxxxxxxx>
Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
---
drivers/pci/iov.c | 18 ++++++++++--------
1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index bd1c4fa..9d29712 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -274,13 +274,6 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
return -ENOMEM;
}

- bus = pci_iov_virtfn_bus(dev, nr_virtfn - 1);
- if (bus > dev->bus->busn_res.end) {
- dev_err(&dev->dev, "can't enable %d VFs (bus %02x out of range of %pR)\n",
- nr_virtfn, bus, &dev->bus->busn_res);
- return -ENOMEM;
- }
-
if (pci_enable_resources(dev, bars)) {
dev_err(&dev->dev, "SR-IOV: IOV BARS not allocated\n");
return -ENOMEM;
@@ -304,6 +297,15 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
}

pci_iov_set_numvfs(dev, nr_virtfn);
How about move it up?

The idea with moving the write down is to keep the pollution of the SR-IOV capability to a minimum. Basically we have addressed all of the possible software issues at this point so all that remains is possible hardware complications. In addition by moving this code down we only have to modify this code instead of adding "rc=X; goto foo;" in places where "return X;" was used.

Also this is an exception case. There really isn't much point in optimizing for something that should never really happen.

+
+ bus = pci_iov_virtfn_bus(dev, nr_virtfn - 1);
+ if (bus > dev->bus->busn_res.end) {
+ dev_err(&dev->dev, "can't enable %d VFs (bus %02x out of range of %pR)\n",
+ nr_virtfn, bus, &dev->bus->busn_res);
+ rc = -ENOMEM;
+ goto err_bus;
+ }
+
iov->ctrl |= PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE;
pci_cfg_access_lock(dev);
pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl);
@@ -342,7 +344,7 @@ err_pcibios:
pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl);
ssleep(1);
pci_cfg_access_unlock(dev);
-
+err_bus:
if (iov->link != dev->devfn)
sysfs_remove_link(&dev->dev.kobj, "dep_link");


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/