Re: [PATCH] usb: dwc2: host: Fix ahbcfg for rk3066

From: Liangfeng Wu
Date: Fri Oct 30 2015 - 04:08:59 EST


On 10/21/2015 07:33 AM, Douglas Anderson wrote:
The comment for ahbcfg for rk3066 parameters (also used for rk3288)
claimed that ahbcfg was INCR16, but it wasn't. Since the bits weren't
shifted properly, the 0x7 ended up being masked and we ended up
programming 0x3 for the HBstLen. Let's set it to INCR16 properly.

As per Wu Liang Feng at Rockchip this may increase transmission
efficiency. I did blackbox tests with writing 0s to a USB-based SD
reader (forcefully capping CPU Freq to try to measure efficiency):
cd /sys/devices/system/cpu/cpu0/cpufreq
echo userspace > scaling_governor
echo 126000 > scaling_setspeed
for i in $(seq 10); do
dd if=/dev/zero of=/dev/sdb bs=1M count=750
done

With the above tests I found that speeds went from ~15MB/s to ~18MB/s.
Note that most other tests I did (including reading from the same USB
reader) didn't show any difference in performance.

Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
---
drivers/usb/dwc2/platform.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index 5859b0f..e61d773 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -108,7 +108,8 @@ static const struct dwc2_core_params params_rk3066 = {
.host_ls_low_power_phy_clk = -1,
.ts_dline = -1,
.reload_ctl = -1,
- .ahbcfg = 0x7, /* INCR16 */
+ .ahbcfg = GAHBCFG_HBSTLEN_INCR16 <<
+ GAHBCFG_HBSTLEN_SHIFT,
.uframe_sched = -1,
.external_id_pin_ctl = -1,
.hibernation = -1,

Reviewed-by: Liangfeng Wu <wulf@xxxxxxxxxxxxxx>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/