[PATCH v3 0/4] mtd: pxa3xx_nand: rework the timing setup

From: Antoine Tenart
Date: Thu Oct 15 2015 - 03:18:43 EST


Hi all,

Let's try one more time to get this merged.

Another series, introducing the Berlin nand support, depends on this.

This series was part of a bigger one[1], which was split into smaller
ones as asked by Ezequiel[2]. When we take this into account, this is
v8.

The aim here is to use the nand framework to setup the timings,
while keeping the old in-driver way of configuration timings for
compatibility reasons.

You can find the series at:
https://github.com/atenart/linux.git berlin/4.3/nand-timings

Antoine

Since v2:
- Added back the support for keep-config 16 bits devices
- Fixed wrong unit in a calculation
- Reworked the pxa3xx_nand_init_timings() logic
- Allowed compile test the pxa3xx driver

Since v1:
- Rebased on top of v4.2-rc1

Since the series was split up:
- Reworked the ndcr setup
- Removed the read_id_bytes update after device detection

Antoine Tenart (4):
mtd: nand: allow compile test of MTD_NAND_PXA3xx
mtd: pxa3xx_nand: add helpers to setup the timings
mtd: pxa3xx_nand: rework flash detection and timing setup
mtd: pxa3xx_nand: clean up the pxa3xx timings

drivers/mtd/nand/Kconfig | 2 +-
drivers/mtd/nand/pxa3xx_nand.c | 273 ++++++++++++++++----------
include/linux/platform_data/mtd-nand-pxa3xx.h | 11 +-
3 files changed, 172 insertions(+), 114 deletions(-)

--
2.6.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/