Re: [PATCH v5 0/5] Provide better MADT subtable sanity checks

From: Pat Erley
Date: Sun Oct 11 2015 - 23:18:16 EST


On 10/05/2015 10:12 AM, Al Stone wrote:
On 10/05/2015 07:39 AM, Rafael J. Wysocki wrote:
On Wednesday, September 30, 2015 10:10:16 AM Al Stone wrote:
On 09/30/2015 03:00 AM, Hanjun Guo wrote:
On 2015/9/30 7:45, Al Stone wrote:
NB: this patch set is for use against the linux-pm bleeding edge branch.


[snip...]


For this patch set,

Reviewed-by: Hanjun Guo <hanjun.guo@xxxxxxxxxx>

Thanks
Hanjun

Thanks, Hanjun!

Series applied, thanks!

Rafael


Thanks, Rafael!


Just decided to test out linux-next (to see the new nouveau cleanups). This change set prevents my Lenovo W510 from booting properly.

Reverting: 7494b0 "ACPI: add in a bad_madt_entry() function to eventually replace the macro"

Gets the system booting again. I'm attaching my dmesg from the failed boot, who wants the acpidump?
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.3.0-rc4-next-20151009-linux+ (s0be@anvil) (gcc version 4.9.3 (Gentoo 4.9.3 p1.1, pie-0.6.2) ) #271 SMP Sun Oct 11 16:37:37 PDT 2015
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.3.0-rc4 root=UUID=815266d6-a8b9-4f63-a593-02fde178263f ro net.ifnames=0 rfkill.default_state=0 init=/sbin/init intel_iommu=on nouveau.pstate=1 nouveau.config=NvClkMode=3 zram.zram_num_devices=4 zram.num_devices=4 ro
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bba7bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bba7c000-0x00000000bba81fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bba82000-0x00000000bbb47fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bbb48000-0x00000000bbb5afff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bbb5b000-0x00000000bbbdbfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bbbdc000-0x00000000bbc0efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bbc0f000-0x00000000bbc5cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bbc5d000-0x00000000bbe67fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bbe68000-0x00000000bbee7fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bbee8000-0x00000000bbf0efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bbf0f000-0x00000000bbf17fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bbf18000-0x00000000bbf1efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bbf1f000-0x00000000bbf6bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bbf6c000-0x00000000bbf79fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bbf7a000-0x00000000bbf7cfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bbf7d000-0x00000000bbf80fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bbf81000-0x00000000bbf81fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bbf82000-0x00000000bbf8afff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bbf8b000-0x00000000bbf8bfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bbf8c000-0x00000000bbf9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bbf9f000-0x00000000bbffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bbfff000-0x00000000bbffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bc000000-0x00000000bdffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf800000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feaff000-0x00000000feafffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: LENOVO 4318CTO/4318CTO, BIOS 6NET84WW (1.45 ) 10/03/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x440000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 disabled
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 100000000 mask F00000000 write-back
[ 0.000000] 4 base 200000000 mask E00000000 write-back
[ 0.000000] 5 base 400000000 mask FC0000000 write-back
[ 0.000000] 6 base 0BC000000 mask FFE000000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] original variable MTRRs
[ 0.000000] reg 1, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 2, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 3, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 4, base: 8GB, range: 8GB, type WB
[ 0.000000] reg 5, base: 16GB, range: 1GB, type WB
[ 0.000000] reg 6, base: 3008MB, range: 32MB, type UC
[ 0.000000] total RAM covered: 16352M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 6 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3008MB, range: 32MB, type UC
[ 0.000000] reg 3, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 4, base: 8GB, range: 8GB, type WB
[ 0.000000] reg 5, base: 16GB, range: 1GB, type WB
[ 0.000000] e820: update [mem 0xbc000000-0xbdffffff] usable ==> reserved
[ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbc000 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x0216d000, 0x0216dfff] PGTABLE
[ 0.000000] BRK [0x0216e000, 0x0216efff] PGTABLE
[ 0.000000] BRK [0x0216f000, 0x0216ffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x43fe00000-0x43fffffff]
[ 0.000000] [mem 0x43fe00000-0x43fffffff] page 2M
[ 0.000000] BRK [0x02170000, 0x02170fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x420000000-0x43fdfffff]
[ 0.000000] [mem 0x420000000-0x43fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbba7bfff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbb9fffff] page 2M
[ 0.000000] [mem 0xbba00000-0xbba7bfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbba82000-0xbbb47fff]
[ 0.000000] [mem 0xbba82000-0xbbb47fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbbc0f000-0xbbc5cfff]
[ 0.000000] [mem 0xbbc0f000-0xbbc5cfff] page 4k
[ 0.000000] BRK [0x02171000, 0x02171fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbbf0f000-0xbbf17fff]
[ 0.000000] [mem 0xbbf0f000-0xbbf17fff] page 4k
[ 0.000000] BRK [0x02172000, 0x02172fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbbf1f000-0xbbf6bfff]
[ 0.000000] [mem 0xbbf1f000-0xbbf6bfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbbfff000-0xbbffffff]
[ 0.000000] [mem 0xbbfff000-0xbbffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x41fffffff]
[ 0.000000] [mem 0x100000000-0x41fffffff] page 2M
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F6870 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x00000000BBFF18B8 00009C (v01 LENOVO TP-6N 00001450 LTP 00000000)
[ 0.000000] ACPI: FACP 0x00000000BBFF1A00 0000F4 (v04 LENOVO TP-6N 00001450 LNVO 00000001)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20150818/tbfadt-623)
[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20150818/tbfadt-704)
[ 0.000000] ACPI: DSDT 0x00000000BBFF1C9B 00CEAE (v01 LENOVO TP-6N 00001450 MSFT 03000001)
[ 0.000000] ACPI: FACS 0x00000000BBEE7000 000040
[ 0.000000] ACPI: FACS 0x00000000BBEE7000 000040
[ 0.000000] ACPI: SSDT 0x00000000BBFF1BB4 0000E7 (v01 LENOVO TP-6N 00001450 MSFT 03000001)
[ 0.000000] ACPI: ECDT 0x00000000BBFFEB49 000052 (v01 LENOVO TP-6N 00001450 LNVO 00000001)
[ 0.000000] ACPI: APIC 0x00000000BBFFEB9B 0000BC (v01 LENOVO TP-6N 00001450 LNVO 00000001)
[ 0.000000] ACPI: MCFG 0x00000000BBFFEC57 00003C (v01 LENOVO TP-6N 00001450 LNVO 00000001)
[ 0.000000] ACPI: HPET 0x00000000BBFFEC93 000038 (v01 LENOVO TP-6N 00001450 LNVO 00000001)
[ 0.000000] ACPI: ASF! 0x00000000BBFFEDBE 0000A4 (v16 LENOVO TP-6N 00001450 PTL 00000001)
[ 0.000000] ACPI: SLIC 0x00000000BBFFEE62 000176 (v01 LENOVO TP-6N 00001450 LTP 00000000)
[ 0.000000] ACPI: BOOT 0x00000000BBFFEFD8 000028 (v01 LENOVO TP-6N 00001450 LTP 00000001)
[ 0.000000] ACPI: SSDT 0x00000000BBEE591A 00084B (v01 LENOVO TP-6N 00001450 INTL 20050513)
[ 0.000000] ACPI: TCPA 0x00000000BBF8B000 000032 (v02 PTL CRESTLN 06040000 00005A52)
[ 0.000000] ACPI: DMAR 0x00000000BBF81000 000068 (v01 INTEL CP_FIELD 00000001 INTL 00000001)
[ 0.000000] ACPI: SSDT 0x00000000BBF7C000 0009F1 (v01 PmRef CpuPm 00003000 INTL 20060912)
[ 0.000000] ACPI: SSDT 0x00000000BBF7B000 000259 (v01 PmRef Cpu0Tst 00003000 INTL 20060912)
[ 0.000000] ACPI: SSDT 0x00000000BBF7A000 00049F (v01 PmRef ApTst 00003000 INTL 20060912)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: undefined version for either FADT 4.0 or MADT 1
[ 0.000000] ACPI: Error parsing LAPIC address override entry
[ 0.000000] ACPI: Invalid BIOS MADT, disabling ACPI
[ 0.000000] [ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042f600000-ffff88043f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000043fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bba7bfff]
[ 0.000000] node 0: [mem 0x00000000bba82000-0x00000000bbb47fff]
[ 0.000000] node 0: [mem 0x00000000bbc0f000-0x00000000bbc5cfff]
[ 0.000000] node 0: [mem 0x00000000bbf0f000-0x00000000bbf17fff]
[ 0.000000] node 0: [mem 0x00000000bbf1f000-0x00000000bbf6bfff]
[ 0.000000] node 0: [mem 0x00000000bbfff000-0x00000000bbffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000043fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000043fffffff]
[ 0.000000] On node 0 totalpages: 4176772
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11952 pages used for memmap
[ 0.000000] DMA32 zone: 764903 pages, LIFO batch:31
[ 0.000000] Normal zone: 53248 pages used for memmap
[ 0.000000] Normal zone: 3407872 pages, LIFO batch:31
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbba7c000-0xbba81fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbbb48000-0xbbb5afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbbb5b000-0xbbbdbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbbbdc000-0xbbc0efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbbc5d000-0xbbe67fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbbe68000-0xbbee7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbbee8000-0xbbf0efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbbf18000-0xbbf1efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbbf6c000-0xbbf79fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbbf7a000-0xbbf7cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbbf7d000-0xbbf80fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbbf81000-0xbbf81fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbbf82000-0xbbf8afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbbf8b000-0xbbf8bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbbf8c000-0xbbf9efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbbf9f000-0xbbffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbc000000-0xbdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbe000000-0xbf7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeaff000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88043fc00000 s96472 r8192 d30504 u2097152
[ 0.000000] pcpu-alloc: s96472 r8192 d30504 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4111487
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.3.0-rc4 root=UUID=815266d6-a8b9-4f63-a593-02fde178263f ro net.ifnames=0 rfkill.default_state=0 init=/sbin/init intel_iommu=on nouveau.pstate=1 nouveau.config=NvClkMode=3 zram.zram_num_devices=4 zram.num_devices=4 ro
[ 0.000000] DMAR: IOMMU enabled
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Memory: 16336016K/16707088K available (5365K kernel code, 873K rwdata, 2592K rodata, 5816K init, 876K bss, 371072K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=1
[ 0.000000] NR_IRQS:4352 nr_irqs:32 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1728.880 MHz processor
[ 0.000024] Calibrating delay loop (skipped), value calculated using timer frequency.. 3457.76 BogoMIPS (lpj=1728880)
[ 0.000443] pid_max: default: 32768 minimum: 301
[ 0.000721] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.000938] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.001805] Initializing cgroup subsys io
[ 0.002022] Initializing cgroup subsys memory
[ 0.006846] Initializing cgroup subsys pids
[ 0.007085] CPU: Physical Processor ID: 0
[ 0.007293] CPU: Processor Core ID: 0
[ 0.007503] mce: CPU supports 9 MCE banks
[ 0.007742] CPU0: Thermal monitoring enabled (TM1)
[ 0.007959] process: using mwait in idle threads
[ 0.008171] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.008380] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.021041] Freeing SMP alternatives memory: 24K (ffffffff8208a000 - ffffffff82090000)
[ 0.024830] ftrace: allocating 24434 entries in 96 pages
[ 0.046467] smpboot: weird, boot CPU (#0) not listed by the BIOS
[ 0.046679] smpboot: SMP motherboard not detected
[ 0.046905] smpboot: SMP disabled
[ 0.047114] DMAR: Host address width 36
[ 0.047319] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[ 0.047543] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c90780106f0462 ecap f020e2
[ 0.047946] DMAR: RMRR base: 0x000000bbee9000 end: 0x000000bbefffff
[ 0.251719] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
[ 0.252235] perf_event_intel: CPU erratum AAJ80 worked around
[ 0.252445] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.252656] ... version: 3
[ 0.252866] ... bit width: 48
[ 0.253071] ... generic registers: 4
[ 0.253276] ... value mask: 0000ffffffffffff
[ 0.253484] ... max period: 000000007fffffff
[ 0.253693] ... fixed-purpose events: 3
[ 0.253898] ... event mask: 000000070000000f
[ 0.254387] x86: Booted up 1 node, 1 CPUs
[ 0.254596] smpboot: Total of 1 processors activated (3457.76 BogoMIPS)
[ 0.254934] devtmpfs: initialized
[ 0.255733] PM: Registering ACPI NVS region [mem 0xbbb5b000-0xbbbdbfff] (528384 bytes)
[ 0.256144] PM: Registering ACPI NVS region [mem 0xbbe68000-0xbbee7fff] (524288 bytes)
[ 0.256552] PM: Registering ACPI NVS region [mem 0xbbf6c000-0xbbf79fff] (57344 bytes)
[ 0.256946] PM: Registering ACPI NVS region [mem 0xbbf7d000-0xbbf80fff] (16384 bytes)
[ 0.257331] PM: Registering ACPI NVS region [mem 0xbbf82000-0xbbf8afff] (36864 bytes)
[ 0.257723] PM: Registering ACPI NVS region [mem 0xbbf8c000-0xbbf9efff] (77824 bytes)
[ 0.258230] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.258744] xor: measuring software checksum speed
[ 0.268685] prefetch64-sse: 4748.000 MB/sec
[ 0.278682] generic_sse: 4216.000 MB/sec
[ 0.278890] xor: using function: prefetch64-sse (4748.000 MB/sec)
[ 0.279146] RTC time: 0:53:00, date: 10/12/15
[ 0.279545] NET: Registered protocol family 16
[ 0.280109] cpuidle: using governor ladder
[ 0.280321] cpuidle: using governor menu
[ 0.280698] Simple Boot Flag at 0x35 set to 0x1
[ 0.280944] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.281419] PCI: Using configuration type 1 for base access
[ 0.300695] raid6: sse2x1 gen() 2894 MB/s
[ 0.317684] raid6: sse2x1 xor() 2128 MB/s
[ 0.334671] raid6: sse2x2 gen() 3472 MB/s
[ 0.351670] raid6: sse2x2 xor() 2607 MB/s
[ 0.368666] raid6: sse2x4 gen() 3843 MB/s
[ 0.385662] raid6: sse2x4 xor() 2818 MB/s
[ 0.385871] raid6: using algorithm sse2x4 gen() 3843 MB/s
[ 0.386082] raid6: .... xor() 2818 MB/s, rmw enabled
[ 0.386289] raid6: using ssse3x2 recovery algorithm
[ 0.386522] ACPI: Interpreter disabled.
[ 0.386844] vgaarb: loaded
[ 0.387170] SCSI subsystem initialized
[ 0.387425] libata version 3.00 loaded.
[ 0.387565] PCI: Probing PCI hardware
[ 0.387779] PCI: root bus 00: using default resources
[ 0.387782] PCI: Probing PCI hardware (bus 00)
[ 0.387829] PCI host bridge to bus 0000:00
[ 0.388039] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.388252] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.388465] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.388865] pci 0000:00:00.0: [8086:d132] type 00 class 0x060000
[ 0.388987] pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
[ 0.389045] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.389132] pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
[ 0.389244] pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
[ 0.389355] pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
[ 0.389463] pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
[ 0.389574] pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
[ 0.389683] pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
[ 0.389815] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[ 0.389862] pci 0000:00:16.0: reg 0x10: [mem 0xf2627800-0xf262780f 64bit]
[ 0.389944] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.390058] pci 0000:00:19.0: [8086:10ea] type 00 class 0x020000
[ 0.390095] pci 0000:00:19.0: reg 0x10: [mem 0xf2600000-0xf261ffff]
[ 0.390112] pci 0000:00:19.0: reg 0x14: [mem 0xf2625000-0xf2625fff]
[ 0.390129] pci 0000:00:19.0: reg 0x18: [io 0x1820-0x183f]
[ 0.390196] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.390291] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.390331] pci 0000:00:1a.0: reg 0x10: [mem 0xf2628000-0xf26283ff]
[ 0.390423] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.390522] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.390564] pci 0000:00:1b.0: reg 0x10: [mem 0xf2620000-0xf2623fff 64bit]
[ 0.390636] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.390742] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.390828] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.390866] pci 0000:00:1c.0: Enabling MPC IRBNCE
[ 0.391082] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[ 0.391381] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 0.391466] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.391506] pci 0000:00:1c.1: Enabling MPC IRBNCE
[ 0.391723] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled
[ 0.392024] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
[ 0.392110] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.392145] pci 0000:00:1c.3: Enabling MPC IRBNCE
[ 0.392360] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled
[ 0.392665] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[ 0.392746] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.392786] pci 0000:00:1c.4: Enabling MPC IRBNCE
[ 0.393001] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled
[ 0.393304] pci 0000:00:1c.6: [8086:3b4e] type 01 class 0x060400
[ 0.393389] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.393429] pci 0000:00:1c.6: Enabling MPC IRBNCE
[ 0.393644] pci 0000:00:1c.6: Intel PCH root port ACS workaround enabled
[ 0.393946] pci 0000:00:1c.7: [8086:3b50] type 01 class 0x060400
[ 0.394027] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.394066] pci 0000:00:1c.7: Enabling MPC IRBNCE
[ 0.394277] pci 0000:00:1c.7: Intel PCH root port ACS workaround enabled
[ 0.394570] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.394615] pci 0000:00:1d.0: reg 0x10: [mem 0xf2628400-0xf26287ff]
[ 0.394714] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.394814] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.394953] pci 0000:00:1f.0: [8086:3b07] type 00 class 0x060100
[ 0.395158] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
[ 0.395195] pci 0000:00:1f.2: reg 0x10: [io 0x1818-0x181f]
[ 0.395211] pci 0000:00:1f.2: reg 0x14: [io 0x180c-0x180f]
[ 0.395227] pci 0000:00:1f.2: reg 0x18: [io 0x1810-0x1817]
[ 0.395243] pci 0000:00:1f.2: reg 0x1c: [io 0x1808-0x180b]
[ 0.395258] pci 0000:00:1f.2: reg 0x20: [io 0x1840-0x185f]
[ 0.395274] pci 0000:00:1f.2: reg 0x24: [mem 0xf2627000-0xf26277ff]
[ 0.395321] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.395414] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.395441] pci 0000:00:1f.3: reg 0x10: [mem 0xf2628800-0xf26288ff 64bit]
[ 0.395468] pci 0000:00:1f.3: reg 0x20: [io 0x1860-0x187f]
[ 0.395639] pci 0000:01:00.0: [10de:0a3c] type 00 class 0x030000
[ 0.395679] pci 0000:01:00.0: reg 0x10: [mem 0xcc000000-0xccffffff]
[ 0.395698] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.395718] pci 0000:01:00.0: reg 0x1c: [mem 0xce000000-0xcfffffff 64bit pref]
[ 0.395732] pci 0000:01:00.0: reg 0x24: [io 0x2000-0x207f]
[ 0.395746] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[ 0.395839] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.396049] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.396463] pci 0000:01:00.1: [10de:0be2] type 00 class 0x040300
[ 0.396496] pci 0000:01:00.1: reg 0x10: [mem 0xcdefc000-0xcdefffff]
[ 0.396688] pci 0000:00:03.0: PCI bridge to [bus 01]
[ 0.396900] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]
[ 0.396906] pci 0000:00:03.0: bridge window [mem 0xcc000000-0xcdefffff]
[ 0.396913] pci 0000:00:03.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.396986] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.397323] pci 0000:03:00.0: [8086:0089] type 00 class 0x028000
[ 0.397439] pci 0000:03:00.0: reg 0x10: [mem 0xf2000000-0xf2001fff 64bit]
[ 0.397701] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.399695] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.399916] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf20fffff]
[ 0.400000] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.400219] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.400225] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 0.400239] pci 0000:00:1c.3: bridge window [mem 0xf2700000-0xf27fffff 64bit pref]
[ 0.400382] pci 0000:0d:00.0: [1180:e822] type 00 class 0x080500
[ 0.400452] pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.400741] pci 0000:0d:00.0: reg 0x10: [mem 0xf2100000-0xf21000ff]
[ 0.400871] pci 0000:0d:00.0: supports D1 D2
[ 0.400875] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.401069] pci 0000:0d:00.1: [1180:e230] type 00 class 0x088000
[ 0.401142] pci 0000:0d:00.1: reg 0x10: [mem 0xf2100400-0xf21004ff]
[ 0.401272] pci 0000:0d:00.1: supports D1 D2
[ 0.401276] pci 0000:0d:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.402737] pci 0000:00:1c.4: PCI bridge to [bus 0d]
[ 0.402952] pci 0000:00:1c.4: bridge window [mem 0xf2100000-0xf21fffff]
[ 0.403084] pci 0000:0f:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.403199] pci 0000:0f:00.0: reg 0x10: [mem 0xf2200000-0xf2201fff 64bit]
[ 0.403406] pci 0000:0f:00.0: PME# supported from D0 D3hot D3cold
[ 0.404695] pci 0000:00:1c.6: PCI bridge to [bus 0f-16]
[ 0.404916] pci 0000:00:1c.6: bridge window [mem 0xf2200000-0xf22fffff]
[ 0.405069] pci 0000:17:00.0: [1180:e822] type 00 class 0x080500
[ 0.405134] pci 0000:17:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.405418] pci 0000:17:00.0: reg 0x10: [mem 0xf2300000-0xf23000ff]
[ 0.405548] pci 0000:17:00.0: supports D1 D2
[ 0.405552] pci 0000:17:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.405755] pci 0000:17:00.3: [1180:e832] type 00 class 0x0c0010
[ 0.405829] pci 0000:17:00.3: reg 0x10: [mem 0xf2300800-0xf2300fff]
[ 0.405951] pci 0000:17:00.3: supports D1 D2
[ 0.405956] pci 0000:17:00.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.407723] pci 0000:00:1c.7: PCI bridge to [bus 17-1e]
[ 0.407942] pci 0000:00:1c.7: bridge window [mem 0xf2300000-0xf23fffff]
[ 0.408065] pci 0000:00:1e.0: PCI bridge to [bus 1f] (subtractive decode)
[ 0.408289] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.408294] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[ 0.408349] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 1f
[ 0.408381] PCI: root bus 04: using default resources
[ 0.408385] PCI: Probing PCI hardware (bus 04)
[ 0.408431] PCI host bridge to bus 0000:04
[ 0.408640] pci_bus 0000:04: root bus resource [io 0x0000-0xffff]
[ 0.408857] pci_bus 0000:04: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.409073] pci_bus 0000:04: No busn resource found for root bus, will use [bus 04-ff]
[ 0.409458] pci_bus 0000:04: busn_res: can not insert [bus 04-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-1f])
[ 0.409501] pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 04
[ 0.409507] pci_bus 0000:04: busn_res: can not insert [bus 04] under domain [bus 00-ff] (conflicts with (null) [bus 00-1f])
[ 0.409698] PCI: pci_cache_line_size set to 64 bytes
[ 0.410056] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.410060] e820: reserve RAM buffer [mem 0xbba7c000-0xbbffffff]
[ 0.410066] e820: reserve RAM buffer [mem 0xbbb48000-0xbbffffff]
[ 0.410071] e820: reserve RAM buffer [mem 0xbbc5d000-0xbbffffff]
[ 0.410076] e820: reserve RAM buffer [mem 0xbbf18000-0xbbffffff]
[ 0.410081] e820: reserve RAM buffer [mem 0xbbf6c000-0xbbffffff]
[ 0.410468] clocksource: Switched to clocksource refined-jiffies
[ 0.417601] pnp: PnP ACPI: disabled
[ 0.421121] pci 0000:01:00.0: BAR 6: assigned [mem 0xcd000000-0xcd07ffff pref]
[ 0.421509] pci 0000:00:03.0: PCI bridge to [bus 01]
[ 0.421724] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]
[ 0.421940] pci 0000:00:03.0: bridge window [mem 0xcc000000-0xcdefffff]
[ 0.422154] pci 0000:00:03.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.422540] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.422765] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.422980] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf20fffff]
[ 0.423198] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.423414] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.423635] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 0.423854] pci 0000:00:1c.3: bridge window [mem 0xf2700000-0xf27fffff 64bit pref]
[ 0.424245] pci 0000:00:1c.4: PCI bridge to [bus 0d]
[ 0.424461] pci 0000:00:1c.4: bridge window [mem 0xf2100000-0xf21fffff]
[ 0.424688] pci 0000:00:1c.6: PCI bridge to [bus 0f-16]
[ 0.424904] pci 0000:00:1c.6: bridge window [mem 0xf2200000-0xf22fffff]
[ 0.425125] pci 0000:00:1c.7: PCI bridge to [bus 17-1e]
[ 0.425344] pci 0000:00:1c.7: bridge window [mem 0xf2300000-0xf23fffff]
[ 0.425570] pci 0000:00:1e.0: PCI bridge to [bus 1f]
[ 0.425798] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.425802] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.425807] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.425811] pci_bus 0000:01: resource 1 [mem 0xcc000000-0xcdefffff]
[ 0.425815] pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.425820] pci_bus 0000:03: resource 1 [mem 0xf2000000-0xf20fffff]
[ 0.425824] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
[ 0.425828] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff]
[ 0.425832] pci_bus 0000:05: resource 2 [mem 0xf2700000-0xf27fffff 64bit pref]
[ 0.425836] pci_bus 0000:0d: resource 1 [mem 0xf2100000-0xf21fffff]
[ 0.425841] pci_bus 0000:0f: resource 1 [mem 0xf2200000-0xf22fffff]
[ 0.425845] pci_bus 0000:17: resource 1 [mem 0xf2300000-0xf23fffff]
[ 0.425849] pci_bus 0000:1f: resource 4 [io 0x0000-0xffff]
[ 0.425853] pci_bus 0000:1f: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.425858] pci_bus 0000:04: resource 4 [io 0x0000-0xffff]
[ 0.425862] pci_bus 0000:04: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.425908] NET: Registered protocol family 2
[ 0.426377] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.427443] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.428281] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.428526] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.428967] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.429460] NET: Registered protocol family 1
[ 0.448816] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.456865] pci 0000:0f:00.0: xHCI BIOS handoff failed (BIOS bug ?) 00010401
[ 0.457851] PCI: CLS 64 bytes, default 64
[ 0.617371] DMAR: No ATSR found
[ 0.617785] DMAR: dmar0: Using Queued invalidation
[ 0.618012] DMAR: Setting RMRR:
[ 0.618243] DMAR: Setting identity map for device 0000:00:1a.0 [0xbbee9000 - 0xbbefffff]
[ 0.618677] DMAR: Setting identity map for device 0000:00:1d.0 [0xbbee9000 - 0xbbefffff]
[ 0.619086] DMAR: Prepare 0-16MiB unity mapping for LPC
[ 0.619309] DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
[ 0.619936] DMAR: Intel(R) Virtualization Technology for Directed I/O
[ 0.620221] iommu: Adding device 0000:00:00.0 to group 0
[ 0.620451] iommu: Adding device 0000:00:03.0 to group 1
[ 0.620727] iommu: Adding device 0000:00:08.0 to group 2
[ 0.620953] iommu: Adding device 0000:00:08.1 to group 2
[ 0.621178] iommu: Adding device 0000:00:08.2 to group 2
[ 0.621402] iommu: Adding device 0000:00:08.3 to group 2
[ 0.621645] iommu: Adding device 0000:00:10.0 to group 3
[ 0.621873] iommu: Adding device 0000:00:10.1 to group 3
[ 0.622106] iommu: Adding device 0000:00:16.0 to group 4
[ 0.622332] iommu: Adding device 0000:00:19.0 to group 5
[ 0.622559] iommu: Adding device 0000:00:1a.0 to group 6
[ 0.622791] iommu: Adding device 0000:00:1b.0 to group 7
[ 0.623019] iommu: Adding device 0000:00:1c.0 to group 8
[ 0.623249] iommu: Adding device 0000:00:1c.1 to group 9
[ 0.623476] iommu: Adding device 0000:00:1c.3 to group 10
[ 0.623708] iommu: Adding device 0000:00:1c.4 to group 11
[ 0.623939] iommu: Adding device 0000:00:1c.6 to group 12
[ 0.624167] iommu: Adding device 0000:00:1c.7 to group 13
[ 0.624394] iommu: Adding device 0000:00:1d.0 to group 14
[ 0.624627] iommu: Adding device 0000:00:1e.0 to group 15
[ 0.624872] iommu: Adding device 0000:00:1f.0 to group 16
[ 0.625099] iommu: Adding device 0000:00:1f.2 to group 16
[ 0.625326] iommu: Adding device 0000:00:1f.3 to group 16
[ 0.625544] iommu: Adding device 0000:01:00.0 to group 1
[ 0.625765] iommu: Adding device 0000:01:00.1 to group 1
[ 0.625994] iommu: Adding device 0000:03:00.0 to group 17
[ 0.626234] iommu: Adding device 0000:0d:00.0 to group 18
[ 0.626462] iommu: Adding device 0000:0d:00.1 to group 18
[ 0.626693] iommu: Adding device 0000:0f:00.0 to group 19
[ 0.631528] iommu: Adding device 0000:17:00.0 to group 20
[ 0.631755] iommu: Adding device 0000:17:00.3 to group 20
[ 0.635167] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.636115] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.636356] audit: initializing netlink subsys (disabled)
[ 0.636585] audit: type=2000 audit(1444611180.511:1): initialized
[ 0.640542] zbud: loaded
[ 0.642301] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.642700] io scheduler noop registered
[ 0.642910] io scheduler deadline registered
[ 0.643180] io scheduler cfq registered (default)
[ 0.644448] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
[ 0.644678] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.644892] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 0.645106] pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
[ 0.645153] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.645374] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.645418] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.645655] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.645880] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.645928] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.646149] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.646195] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.646409] pci 0000:0d:00.0: Signaling PME through PCIe PME interrupt
[ 0.646635] pci 0000:0d:00.1: Signaling PME through PCIe PME interrupt
[ 0.646861] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.646923] pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
[ 0.647138] pci 0000:0f:00.0: Signaling PME through PCIe PME interrupt
[ 0.647356] pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded
[ 0.647401] pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
[ 0.647630] pci 0000:17:00.0: Signaling PME through PCIe PME interrupt
[ 0.647843] pci 0000:17:00.3: Signaling PME through PCIe PME interrupt
[ 0.648065] pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
[ 0.648083] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.648321] pciehp 0000:00:1c.3:pcie04: Slot #3 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 0.648776] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded
[ 0.648788] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.649013] intel_idle: MWAIT substates: 0x1120
[ 0.649024] intel_idle: v0.4 model 0x1E
[ 0.649026] intel_idle: lapic_timer_reliable_states 0x2
[ 0.649217] xenfs: not registering filesystem on non-xen platform
[ 0.649635] Failed to find cpu0 device node
[ 0.649844] Unable to detect cache hierarchy from DT for CPU 0
[ 0.653440] brd: module loaded
[ 0.653878] zram: Added device: zram0
[ 0.654318] zram: Added device: zram1
[ 0.654723] zram: Added device: zram2
[ 0.655156] zram: Added device: zram3
[ 0.655462] ahci 0000:00:1f.2: version 3.0
[ 0.655584] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.666076] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode
[ 0.666465] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 0.672913] scsi host0: ahci
[ 0.673285] scsi host1: ahci
[ 0.673613] scsi host2: ahci
[ 0.673941] scsi host3: ahci
[ 0.674291] scsi host4: ahci
[ 0.674617] scsi host5: ahci
[ 0.674908] ata1: SATA max UDMA/133 abar m2048@0xf2627000 port 0xf2627100 irq 24
[ 0.675322] ata2: SATA max UDMA/133 abar m2048@0xf2627000 port 0xf2627180 irq 24
[ 0.675706] ata3: DUMMY
[ 0.675907] ata4: DUMMY
[ 0.676133] ata5: SATA max UDMA/133 abar m2048@0xf2627000 port 0xf2627300 irq 24
[ 0.676523] ata6: SATA max UDMA/133 abar m2048@0xf2627000 port 0xf2627380 irq 24
[ 0.677013] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.682555] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.682772] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.683190] mousedev: PS/2 mouse device common for all mice
[ 0.683535] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 0.683929] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@xxxxxxxxxx
[ 0.684582] Initializing XFRM netlink socket
[ 0.685167] NET: Registered protocol family 10
[ 0.685731] NET: Registered protocol family 17
[ 0.685949] NET: Registered protocol family 15
[ 0.686766] registered taskstats version 1
[ 0.687084] zswap: loaded using pool lzo/zbud
[ 0.687313] ------------[ cut here ]------------
[ 0.687555] WARNING: CPU: 0 PID: 1 at mm/early_ioremap.c:91 check_early_ioremap_leak+0x3f/0x45()
[ 0.687940] Debug warning: early ioremap leak of 1 areas detected.
please boot with early_ioremap_debug and report the dmesg.
[ 0.688347] Modules linked in:
[ 0.688579] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.3.0-rc4-next-20151009-linux+ #271
[ 0.688962] Hardware name: LENOVO 4318CTO/4318CTO, BIOS 6NET84WW (1.45 ) 10/03/2012
[ 0.689361] 0000000000000000 ffff88042d8afde8 ffffffff812ed22c ffff88042d8afe30
[ 0.689847] ffff88042d8afe20 ffffffff81056d88 ffffffff81b1e0a9 ffff88042c76d401
[ 0.690347] ffffffff81b1e06a 0000000000000000 ffffffff81a11080 ffff88042d8afe88
[ 0.690830] Call Trace:
[ 0.691053] [<ffffffff812ed22c>] dump_stack+0x44/0x55
[ 0.691266] [<ffffffff81056d88>] warn_slowpath_common+0x9f/0xb8
[ 0.691476] [<ffffffff81b1e0a9>] ? check_early_ioremap_leak+0x3f/0x45
[ 0.691688] [<ffffffff81b1e06a>] ? early_ioremap_debug_setup+0x12/0x12
[ 0.691901] [<ffffffff81056de9>] warn_slowpath_fmt+0x48/0x50
[ 0.692130] [<ffffffff810020f5>] ? do_one_initcall+0x90/0x17a
[ 0.692341] [<ffffffff81b1e0a9>] check_early_ioremap_leak+0x3f/0x45
[ 0.692552] [<ffffffff81002152>] do_one_initcall+0xed/0x17a
[ 0.692763] [<ffffffff81af4fff>] kernel_init_freeable+0x10e/0x196
[ 0.692977] [<ffffffff81532eb2>] ? rest_init+0x79/0x79
[ 0.693204] [<ffffffff81532ec0>] kernel_init+0xe/0xda
[ 0.693416] [<ffffffff81538bcf>] ret_from_fork+0x3f/0x70
[ 0.693626] [<ffffffff81532eb2>] ? rest_init+0x79/0x79
[ 0.693835] ---[ end trace dd833814130a8abe ]---
[ 0.694147] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.695549] Btrfs loaded
[ 0.696437] Magic number: 3:262:860
[ 0.696677] hctosys: unable to open rtc device (rtc0)
[ 0.697807] device-tree: Duplicate name in testcase-data, renamed to "duplicate-name#1"
[ 0.699117] ### dt-test ### start of unittest - you will see error messages
[ 0.699435] /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1
[ 0.699828] /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1
[ 0.700273] /testcase-data/phandle-tests/consumer-a: could not find phandle
[ 0.700489] /testcase-data/phandle-tests/consumer-a: could not find phandle
[ 0.700703] /testcase-data/phandle-tests/consumer-a: arguments longer than property
[ 0.701100] /testcase-data/phandle-tests/consumer-a: arguments longer than property
[ 0.702314] irq: no irq domain found for /testcase-data/interrupts/intc0 !
[ 0.704022] overlay_is_topmost: #5 clashes #6 @/testcase-data/overlay-node/test-bus/test-unittest8
[ 0.704435] overlay_removal_is_ok: overlay #5 is not topmost
[ 0.704647] of_overlay_destroy: removal check failed for overlay #5
[ 0.706459] ### dt-test ### end of unittest - 148 passed, 0 failed
[ 0.706691] PM: Hibernation image not present or could not be loaded.
[ 0.986033] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.316661] ata1.00: ATA-9: ST1000LM014-1EJ164, SM11, max UDMA/133
[ 1.316877] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.361049] ata1.00: configured for UDMA/133
[ 1.361424] scsi 0:0:0:0: Direct-Access ATA ST1000LM014-1EJ1 SM11 PQ: 0 ANSI: 5
[ 1.362147] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.362535] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.362809] sd 0:0:0:0: [sda] Write Protect is off
[ 1.363047] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.363077] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.363359] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.364354] sda: sda1 sda2 sda3 sda4
[ 1.365091] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.634966] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x18ebb92aef2, max_idle_ns: 440795243508 ns
[ 1.635366] clocksource: Switched to clocksource tsc
[ 1.667984] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.668409] ata2.00: ATA-8: Corsair CSSD-V128GB2, 2.2, max UDMA/133
[ 1.668623] ata2.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.669699] ata2.00: configured for UDMA/133
[ 1.670081] scsi 1:0:0:0: Direct-Access ATA Corsair CSSD-V12 2.2 PQ: 0 ANSI: 5
[ 1.670751] sd 1:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 1.671246] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.671458] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.671486] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.671756] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.674018] sdb: sdb1 sdb2 sdb3 sdb4
[ 1.674727] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[ 1.976958] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.281932] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.285205] Freeing unused kernel memory: 5816K (ffffffff81adc000 - ffffffff8208a000)
[ 2.285590] Write protecting the kernel read-only data: 10240k
[ 2.286298] Freeing unused kernel memory: 768K (ffff880001540000 - ffff880001600000)
[ 2.294834] Freeing unused kernel memory: 1504K (ffff880001888000 - ffff880001a00000)
[ 2.322480] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.361095] zram0: detected capacity change from 0 to 134217728
[ 2.370328] zram1: detected capacity change from 0 to 10737418240
[ 2.371575] zram2: detected capacity change from 0 to 1073741824
[ 2.378118] random: mkfs.ext4 urandom read with 42 bits of entropy available
[ 2.379580] EXT4-fs (zram0): couldn't mount as ext3 due to feature incompatibilities
[ 2.380136] EXT4-fs (zram0): couldn't mount as ext2 due to feature incompatibilities
[ 2.380800] EXT4-fs (zram0): mounted filesystem without journal. Opts: (null)
[ 2.643151] BTRFS: device fsid 815266d6-a8b9-4f63-a593-02fde178263f devid 1 transid 1347601 /dev/sdb3
[ 2.643995] BTRFS info (device sdb3): disk space caching is enabled
[ 2.647332] BTRFS: bdev /dev/sdb3 errs: wr 9, rd 0, flush 0, corrupt 0, gen 0
[ 2.673418] BTRFS: detected SSD devices, enabling SSD mode
[ 3.436455] systemd-udevd[380]: starting version 225
[ 3.466578] systemd-udevd[381]: Network interface NamePolicy= disabled on kernel command line, ignoring.
[ 3.579504] systemd-udevd[381]: Network interface NamePolicy= disabled on kernel command line, ignoring.
[ 3.786055] usbcore: registered new interface driver usbfs
[ 3.786080] usbcore: registered new interface driver hub
[ 3.795527] usbcore: registered new device driver usb
[ 3.816115] pps_core: LinuxPPS API ver. 1 registered
[ 3.816119] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
[ 3.823179] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.841112] PTP clock support registered
[ 3.841591] ehci-pci: EHCI PCI platform driver
[ 3.841690] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 3.841701] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.841728] ehci-pci 0000:00:1a.0: debug port 2
[ 3.843369] Linux agpgart interface v0.103
[ 3.854482] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 3.882090] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 3.882095] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 3.891174] sdhci: Secure Digital Host Controller Interface driver
[ 3.891178] sdhci: Copyright(c) Pierre Ossman
[ 3.895981] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 1)
[ 3.896124] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 3.896135] sdhci-pci 0000:0d:00.0: No vmmc regulator found
[ 3.896138] sdhci-pci 0000:0d:00.0: No vqmmc regulator found
[ 3.906738] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
[ 3.906896] sdhci-pci 0000:17:00.0: SDHCI controller found [1180:e822] (rev 1)
[ 3.906996] sdhci-pci 0000:17:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 3.907007] sdhci-pci 0000:17:00.0: No vmmc regulator found
[ 3.907011] sdhci-pci 0000:17:00.0: No vqmmc regulator found
[ 3.916875] mmc1: SDHCI controller on PCI [0000:17:00.0] using DMA
[ 3.918491] ehci-pci 0000:00:1a.0: irq 11, io mem 0xf2628000
[ 3.924144] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 3.924308] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.924314] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.924319] usb usb1: Product: EHCI Host Controller
[ 3.924323] usb usb1: Manufacturer: Linux 4.3.0-rc4-next-20151009-linux+ ehci_hcd
[ 3.924326] usb usb1: SerialNumber: 0000:00:1a.0
[ 3.924998] hub 1-0:1.0: USB hub found
[ 3.925012] hub 1-0:1.0: 3 ports detected
[ 3.925411] xhci_hcd 0000:0f:00.0: xHCI Host Controller
[ 3.925423] xhci_hcd 0000:0f:00.0: new USB bus registered, assigned bus number 2
[ 3.925667] xhci_hcd 0000:0f:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004
[ 3.925925] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.925930] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.925934] usb usb2: Product: xHCI Host Controller
[ 3.925938] usb usb2: Manufacturer: Linux 4.3.0-rc4-next-20151009-linux+ xhci-hcd
[ 3.925941] usb usb2: SerialNumber: 0000:0f:00.0
[ 3.926142] hub 2-0:1.0: USB hub found
[ 3.926158] hub 2-0:1.0: 2 ports detected
[ 3.926344] xhci_hcd 0000:0f:00.0: xHCI Host Controller
[ 3.926721] xhci_hcd 0000:0f:00.0: new USB bus registered, assigned bus number 3
[ 3.929664] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 3.929696] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[ 3.936903] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.936946] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.936952] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.936956] usb usb3: Product: xHCI Host Controller
[ 3.936960] usb usb3: Manufacturer: Linux 4.3.0-rc4-next-20151009-linux+ xhci-hcd
[ 3.936964] usb usb3: SerialNumber: 0000:0f:00.0
[ 3.938346] hub 3-0:1.0: USB hub found
[ 3.938407] hub 3-0:1.0: 2 ports detected
[ 3.947067] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 3.961313] snd_hda_codec_conexant hdaudioC0D0: CX20585: BIOS auto-probing.
[ 3.961855] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20585: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[ 3.961861] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.961866] snd_hda_codec_conexant hdaudioC0D0: hp_outs=2 (0x1c/0x19/0x0/0x0/0x0)
[ 3.961870] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
[ 3.961874] snd_hda_codec_conexant hdaudioC0D0: inputs:
[ 3.961878] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x23
[ 3.961882] snd_hda_codec_conexant hdaudioC0D0: Mic=0x1b
[ 3.961886] snd_hda_codec_conexant hdaudioC0D0: Dock Mic=0x1a
[ 3.963603] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[ 3.963613] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
[ 3.963712] IP: [<ffffffff8135be41>] acpi_ns_walk_namespace+0x3d/0x18f
[ 3.963787] PGD 42cb64067 PUD 42cb65067 PMD 0
[ 3.963901] Oops: 0000 [#1] SMP
[ 3.963985] Modules linked in: snd_hda_codec_conexant(+) mfd_core snd_hda_codec_generic firewire_ohci(+) firewire_core rtc_cmos crc_itu_t sdhci_pci drm(+) sdhci xhci_pci(+) e1000e(+) cfg80211 xhci_hcd snd_hda_intel mei_me ehci_pci(+) mmc_core ptp agpgart mei snd_hda_codec pps_core ehci_hcd syscopyarea rfkill sysfillrect snd_hda_core sysimgblt fb_sys_fops snd_pcm fb snd_timer fbdev usbcore usb_common snd soundcore
[ 3.965088] CPU: 0 PID: 466 Comm: modprobe Tainted: G W 4.3.0-rc4-next-20151009-linux+ #271
[ 3.965134] Hardware name: LENOVO 4318CTO/4318CTO, BIOS 6NET84WW (1.45 ) 10/03/2012
[ 3.965178] task: ffff88042c838000 ti: ffff88042d340000 task.ti: ffff88042d340000
[ 3.965220] RIP: 0010:[<ffffffff8135be41>] [<ffffffff8135be41>] acpi_ns_walk_namespace+0x3d/0x18f
[ 3.965293] RSP: 0018:ffff88042d343a80 EFLAGS: 00010202
[ 3.965332] RAX: ffff88042d343af0 RBX: 0000000000000001 RCX: 0000000000000001
[ 3.965373] RDX: 00000000ffffffff RSI: ffffffffffffffff RDI: 0000000000000006
[ 3.965415] RBP: ffff88042d343ad0 R08: ffffffff8135c425 R09: 0000000000000000
[ 3.965456] R10: ffff8800baf31a00 R11: ffffffff820e2300 R12: 0000000000000001
[ 3.965669] R13: ffff880429614000 R14: 0000000000000000 R15: 0000000000000000
[ 3.965882] FS: 00007f756368b700(0000) GS:ffff88043fc00000(0000) knlGS:0000000000000000
[ 3.966266] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3.966474] CR2: 0000000000000018 CR3: 000000042cb67000 CR4: 00000000000006f0
[ 3.966685] Stack:
[ 3.966887] 0000000000000023 0000000000000001 ffff88042d343af0 00000001ffffffff
[ 3.967369] ffff880000000006 0000000000000000 ffff88042c7bf000 ffff880429614000
[ 3.967852] 0000000000000001 0000000000000001 ffff88042d343b10 ffffffff8135c340
[ 3.968334] Call Trace:
[ 3.968540] [<ffffffff8135c340>] acpi_get_devices+0x5b/0x71
[ 3.968750] [<ffffffffa03aa000>] ? 0xffffffffa03aa000
[ 3.968963] [<ffffffffa03aac7f>] hda_fixup_thinkpad_acpi+0x5a/0x186 [snd_hda_codec_conexant]
[ 3.969372] [<ffffffffa0142cbd>] apply_fixup+0xb6/0x127 [snd_hda_codec]
[ 3.969594] [<ffffffffa0142d50>] snd_hda_apply_fixup+0x22/0x24 [snd_hda_codec]
[ 3.969982] [<ffffffffa03aabe8>] patch_conexant_auto+0x365/0x382 [snd_hda_codec_conexant]
[ 3.970371] [<ffffffffa013d3f6>] hda_codec_driver_probe+0xb8/0x118 [snd_hda_codec]
[ 3.970758] [<ffffffff813be99d>] driver_probe_device+0xfc/0x26c
[ 3.970970] [<ffffffff813beb6a>] __driver_attach+0x5d/0x7f
[ 3.971181] [<ffffffff813beb0d>] ? driver_probe_device+0x26c/0x26c
[ 3.971391] [<ffffffff813bcf97>] bus_for_each_dev+0x6d/0x85
[ 3.971601] [<ffffffff813be544>] driver_attach+0x1e/0x20
[ 3.971811] [<ffffffff813be13f>] bus_add_driver+0xf1/0x1e9
[ 3.972020] [<ffffffffa03ae000>] ? 0xffffffffa03ae000
[ 3.972228] [<ffffffff813bf3f4>] driver_register+0x8e/0xca
[ 3.972437] [<ffffffffa03ae000>] ? 0xffffffffa03ae000
[ 3.972650] [<ffffffffa013d0c4>] __hda_codec_driver_register+0x5a/0x5c [snd_hda_codec]
[ 3.973040] [<ffffffffa03ae01e>] conexant_driver_init+0x1e/0x20 [snd_hda_codec_conexant]
[ 3.973425] [<ffffffff81002152>] do_one_initcall+0xed/0x17a
[ 3.973635] [<ffffffff81144861>] ? kmem_cache_alloc_trace+0x3d/0x16d
[ 3.973848] [<ffffffff8110175d>] ? do_init_module+0x27/0x1df
[ 3.974059] [<ffffffff81101795>] do_init_module+0x5f/0x1df
[ 3.974270] [<ffffffff810bb0f7>] load_module+0x185a/0x1c00
[ 3.974481] [<ffffffff81159de5>] ? vfs_read+0xf1/0xff
[ 3.974691] [<ffffffff810b86f7>] ? copy_module_from_fd+0x8e/0xef
[ 3.974902] [<ffffffff810bb5f2>] SyS_finit_module+0x5e/0x6b
[ 3.975111] [<ffffffff810bb5f2>] ? SyS_finit_module+0x5e/0x6b
[ 3.975324] [<ffffffff81538836>] entry_SYSCALL_64_fastpath+0x16/0x75
[ 3.975535] Code: 41 54 41 89 cc 53 bb 01 00 00 00 48 83 ec 28 48 83 fe ff 89 7d d0 4c 0f 44 35 e4 6c df 00 89 55 c8 45 31 ff 41 83 e4 01 89 4d cc <4d> 8b 6e 18 4c 89 45 c0 4c 89 4d b8 c7 45 d4 00 00 00 00 4d 85
[ 3.977772] RIP [<ffffffff8135be41>] acpi_ns_walk_namespace+0x3d/0x18f
[ 3.978010] RSP <ffff88042d343a80>
[ 3.978214] CR2: 0000000000000018
[ 3.978456] ---[ end trace dd833814130a8abf ]---
[ 3.990613] [drm] Initialized drm 1.1.0 20060810
[ 3.995416] Intel(R) Wireless WiFi driver for Linux
[ 3.995647] Copyright(c) 2003- 2015 Intel Corporation
[ 3.999310] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 4.001640] random: nonblocking pool is initialized
[ 4.007844] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6050-exp.ucode failed with error -2
[ 4.012450] iwlwifi 0000:03:00.0: loaded firmware version 41.28.5.1 build 33926 op_mode iwldvm
[ 4.033843] firewire_ohci 0000:17:00.3: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[ 4.058522] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG enabled
[ 4.058740] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 4.058977] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 4.059192] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N + WiMAX 6250 AGN, REV=0x84
[ 4.059890] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 4.125937] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 4.159127] microcode: CPU0 sig=0x106e5, pf=0x10, revision=0x5
[ 4.163835] microcode: CPU0 sig=0x106e5, pf=0x10, revision=0x5
[ 4.164658] microcode: CPU0 updated to revision 0x7, date = 2013-08-20
[ 4.169393] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 4.241769] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 4.246786] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 4.357142] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 4.357361] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.357951] hub 1-1:1.0: USB hub found
[ 4.358390] hub 1-1:1.0: 6 ports detected
[ 4.365742] cfg80211: World regulatory domain updated:
[ 4.365955] cfg80211: DFS Master region: unset
[ 4.365992] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 4.366575] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.366982] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.367368] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.367769] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 4.368158] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 4.368544] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 4.368954] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.369343] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 4.397050] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:3e:ba:af
[ 4.397439] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 4.398981] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: A002FF-0FF
[ 4.400770] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 4.400992] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 4.401398] ehci-pci 0000:00:1d.0: debug port 2
[ 4.405570] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 4.426766] ehci-pci 0000:00:1d.0: irq 7, io mem 0xf2628400
[ 4.433258] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 4.433606] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.433854] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.434239] usb usb4: Product: EHCI Host Controller
[ 4.434447] usb usb4: Manufacturer: Linux 4.3.0-rc4-next-20151009-linux+ ehci_hcd
[ 4.434856] usb usb4: SerialNumber: 0000:00:1d.0
[ 4.441478] hub 4-0:1.0: USB hub found
[ 4.442757] hub 4-0:1.0: 3 ports detected
[ 4.445016] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 4.448702] ------------[ cut here ]------------
[ 4.448954] WARNING: CPU: 0 PID: 433 at lib/kobject.c:597 kobject_get+0x33/0x6a()
[ 4.449340] kobject: ' ' (ffff88042cef0e58): is not initialized, yet kobject_get() is being called.
[ 4.449746] Modules linked in: gpio_ich(+) coretemp kvm_intel kvm irqbypass microcode arc4 psmouse evdev video fbcon bitblit i2c_algo_bit softcursor font i2c_i801 iwldvm drm_kms_helper mac80211 cfbfillrect cfbimgblt cfbcopyarea ttm iwlwifi lpc_ich snd_hda_codec_conexant(+) mfd_core snd_hda_codec_generic firewire_ohci firewire_core rtc_cmos crc_itu_t sdhci_pci drm sdhci xhci_pci e1000e cfg80211 xhci_hcd snd_hda_intel mei_me ehci_pci mmc_core ptp agpgart mei snd_hda_codec pps_core ehci_hcd syscopyarea rfkill sysfillrect snd_hda_core sysimgblt fb_sys_fops snd_pcm fb snd_timer fbdev usbcore usb_common snd soundcore
[ 4.457537] CPU: 0 PID: 433 Comm: systemd-udevd Tainted: G D W 4.3.0-rc4-next-20151009-linux+ #271
[ 4.457941] Hardware name: LENOVO 4318CTO/4318CTO, BIOS 6NET84WW (1.45 ) 10/03/2012
[ 4.458325] 0000000000000000 ffff88042c19fa40 ffffffff812ed22c ffff88042c19fa88
[ 4.458828] ffff88042c19fa78 ffffffff81056d88 ffffffff812eedb9 ffff88042cef0e58
[ 4.459313] ffff8804297bc000 0000000000000000 0000000000000003 ffff88042c19fae0
[ 4.459811] Call Trace:
[ 4.460018] [<ffffffff812ed22c>] dump_stack+0x44/0x55
[ 4.460229] [<ffffffff81056d88>] warn_slowpath_common+0x9f/0xb8
[ 4.460440] [<ffffffff812eedb9>] ? kobject_get+0x33/0x6a
[ 4.460652] [<ffffffff81056de9>] warn_slowpath_fmt+0x48/0x50
[ 4.460884] [<ffffffff812eedb9>] kobject_get+0x33/0x6a
[ 4.461097] [<ffffffff8144f051>] of_node_get+0x1b/0x21
[ 4.461310] [<ffffffff813147de>] of_gpiochip_add+0x6b/0xdd
[ 4.461520] [<ffffffff81312e37>] gpiochip_add+0x22b/0x3f5
[ 4.461749] [<ffffffff81076a6c>] ? wake_up_q+0x56/0x56
[ 4.461964] [<ffffffffa00206ab>] ichx_gpio_probe+0x2cb/0x351 [gpio_ich]
[ 4.462177] [<ffffffff813c03c4>] platform_drv_probe+0x38/0x7d
[ 4.462388] [<ffffffff813be99d>] driver_probe_device+0xfc/0x26c
[ 4.462601] [<ffffffff813beb6a>] __driver_attach+0x5d/0x7f
[ 4.462828] [<ffffffff813beb0d>] ? driver_probe_device+0x26c/0x26c
[ 4.463041] [<ffffffff813bcf97>] bus_for_each_dev+0x6d/0x85
[ 4.463251] [<ffffffff813be544>] driver_attach+0x1e/0x20
[ 4.463460] [<ffffffff813be13f>] bus_add_driver+0xf1/0x1e9
[ 4.463669] [<ffffffffa0023000>] ? 0xffffffffa0023000
[ 4.463896] [<ffffffff813bf3f4>] driver_register+0x8e/0xca
[ 4.464108] [<ffffffffa0023000>] ? 0xffffffffa0023000
[ 4.464316] [<ffffffff813c031a>] __platform_driver_register+0x36/0x38
[ 4.464529] [<ffffffffa0023017>] ichx_gpio_driver_init+0x17/0x19 [gpio_ich]
[ 4.464760] [<ffffffff81002152>] do_one_initcall+0xed/0x17a
[ 4.464972] [<ffffffff81145a6e>] ? kfree+0xec/0x135
[ 4.465180] [<ffffffff81144861>] ? kmem_cache_alloc_trace+0x3d/0x16d
[ 4.465391] [<ffffffff8110175d>] ? do_init_module+0x27/0x1df
[ 4.465602] [<ffffffff81101795>] do_init_module+0x5f/0x1df
[ 4.465830] [<ffffffff810bb0f7>] load_module+0x185a/0x1c00
[ 4.466043] [<ffffffff81159de5>] ? vfs_read+0xf1/0xff
[ 4.466253] [<ffffffff810b86f7>] ? copy_module_from_fd+0x8e/0xef
[ 4.466465] [<ffffffff810bb5f2>] SyS_finit_module+0x5e/0x6b
[ 4.466674] [<ffffffff810bb5f2>] ? SyS_finit_module+0x5e/0x6b
[ 4.466904] [<ffffffff81538836>] entry_SYSCALL_64_fastpath+0x16/0x75
[ 4.467118] ---[ end trace dd833814130a8ac0 ]---
[ 4.467324] ------------[ cut here ]------------
[ 4.467532] WARNING: CPU: 0 PID: 433 at include/linux/kref.h:47 kobject_get+0x5d/0x6a()
[ 4.467932] Modules linked in: gpio_ich(+) coretemp kvm_intel kvm irqbypass microcode arc4 psmouse evdev video fbcon bitblit i2c_algo_bit softcursor font i2c_i801 iwldvm drm_kms_helper mac80211 cfbfillrect cfbimgblt cfbcopyarea ttm iwlwifi lpc_ich snd_hda_codec_conexant(+) mfd_core snd_hda_codec_generic firewire_ohci firewire_core rtc_cmos crc_itu_t sdhci_pci drm sdhci xhci_pci e1000e cfg80211 xhci_hcd snd_hda_intel mei_me ehci_pci mmc_core ptp agpgart mei snd_hda_codec pps_core ehci_hcd syscopyarea rfkill sysfillrect snd_hda_core sysimgblt fb_sys_fops snd_pcm fb snd_timer fbdev usbcore usb_common snd soundcore
[ 4.471127] CPU: 0 PID: 433 Comm: systemd-udevd Tainted: G D W 4.3.0-rc4-next-20151009-linux+ #271
[ 4.471513] Hardware name: LENOVO 4318CTO/4318CTO, BIOS 6NET84WW (1.45 ) 10/03/2012
[ 4.471913] 0000000000000000 ffff88042c19fa98 ffffffff812ed22c 0000000000000000
[ 4.472398] ffff88042c19fad0 ffffffff81056d88 ffffffff812eede3 ffff88042cef0e58
[ 4.472898] ffff8804297bc000 0000000000000000 0000000000000003 ffff88042c19fae0
[ 4.473381] Call Trace:
[ 4.473585] [<ffffffff812ed22c>] dump_stack+0x44/0x55
[ 4.473813] [<ffffffff81056d88>] warn_slowpath_common+0x9f/0xb8
[ 4.474024] [<ffffffff812eede3>] ? kobject_get+0x5d/0x6a
[ 4.474234] [<ffffffff81056e54>] warn_slowpath_null+0x1a/0x1c
[ 4.474444] [<ffffffff812eede3>] kobject_get+0x5d/0x6a
[ 4.474653] [<ffffffff8144f051>] of_node_get+0x1b/0x21
[ 4.474880] [<ffffffff813147de>] of_gpiochip_add+0x6b/0xdd
[ 4.475092] [<ffffffff81312e37>] gpiochip_add+0x22b/0x3f5
[ 4.475303] [<ffffffff81076a6c>] ? wake_up_q+0x56/0x56
[ 4.475514] [<ffffffffa00206ab>] ichx_gpio_probe+0x2cb/0x351 [gpio_ich]
[ 4.475743] [<ffffffff813c03c4>] platform_drv_probe+0x38/0x7d
[ 4.475956] [<ffffffff813be99d>] driver_probe_device+0xfc/0x26c
[ 4.476167] [<ffffffff813beb6a>] __driver_attach+0x5d/0x7f
[ 4.476376] [<ffffffff813beb0d>] ? driver_probe_device+0x26c/0x26c
[ 4.476587] [<ffffffff813bcf97>] bus_for_each_dev+0x6d/0x85
[ 4.476814] [<ffffffff813be544>] driver_attach+0x1e/0x20
[ 4.477025] [<ffffffff813be13f>] bus_add_driver+0xf1/0x1e9
[ 4.477235] [<ffffffffa0023000>] ? 0xffffffffa0023000
[ 4.477444] [<ffffffff813bf3f4>] driver_register+0x8e/0xca
[ 4.477653] [<ffffffffa0023000>] ? 0xffffffffa0023000
[ 4.477879] [<ffffffff813c031a>] __platform_driver_register+0x36/0x38
[ 4.478094] [<ffffffffa0023017>] ichx_gpio_driver_init+0x17/0x19 [gpio_ich]
[ 4.478306] [<ffffffff81002152>] do_one_initcall+0xed/0x17a
[ 4.478516] [<ffffffff81145a6e>] ? kfree+0xec/0x135
[ 4.478741] [<ffffffff81144861>] ? kmem_cache_alloc_trace+0x3d/0x16d
[ 4.478954] [<ffffffff8110175d>] ? do_init_module+0x27/0x1df
[ 4.479164] [<ffffffff81101795>] do_init_module+0x5f/0x1df
[ 4.479374] [<ffffffff810bb0f7>] load_module+0x185a/0x1c00
[ 4.479584] [<ffffffff81159de5>] ? vfs_read+0xf1/0xff
[ 4.479811] [<ffffffff810b86f7>] ? copy_module_from_fd+0x8e/0xef
[ 4.480024] [<ffffffff810bb5f2>] SyS_finit_module+0x5e/0x6b
[ 4.480234] [<ffffffff810bb5f2>] ? SyS_finit_module+0x5e/0x6b
[ 4.480445] [<ffffffff81538836>] entry_SYSCALL_64_fastpath+0x16/0x75
[ 4.480656] ---[ end trace dd833814130a8ac1 ]---
[ 4.480885] general protection fault: 0000 [#2] SMP
[ 4.481144] Modules linked in: gpio_ich(+) coretemp kvm_intel kvm irqbypass microcode arc4 psmouse evdev video fbcon bitblit i2c_algo_bit softcursor font i2c_i801 iwldvm drm_kms_helper mac80211 cfbfillrect cfbimgblt cfbcopyarea ttm iwlwifi lpc_ich snd_hda_codec_conexant(+) mfd_core snd_hda_codec_generic firewire_ohci firewire_core rtc_cmos crc_itu_t sdhci_pci drm sdhci xhci_pci e1000e cfg80211 xhci_hcd snd_hda_intel mei_me ehci_pci mmc_core ptp agpgart mei snd_hda_codec pps_core ehci_hcd syscopyarea rfkill sysfillrect snd_hda_core sysimgblt fb_sys_fops snd_pcm fb snd_timer fbdev usbcore usb_common snd soundcore
[ 4.484279] CPU: 0 PID: 433 Comm: systemd-udevd Tainted: G D W 4.3.0-rc4-next-20151009-linux+ #271
[ 4.484665] Hardware name: LENOVO 4318CTO/4318CTO, BIOS 6NET84WW (1.45 ) 10/03/2012
[ 4.485050] task: ffff88042c1cb500 ti: ffff88042c19c000 task.ti: ffff88042c19c000
[ 4.485432] RIP: 0010:[<ffffffff8144c257>] [<ffffffff8144c257>] __of_find_property+0x24/0x51
[ 4.485846] RSP: 0018:ffff88042c19fac8 EFLAGS: 00010006
[ 4.486058] RAX: 0000000000000000 RBX: 3a30303a30303030 RCX: 00000000ffffffff
[ 4.486270] RDX: 0000000000000000 RSI: ffffffff818072f8 RDI: ffff88042cfcd290
[ 4.486482] RBP: ffff88042c19fae0 R08: 0000000000000000 R09: 0000000000000000
[ 4.486694] R10: ffffffffa0020de0 R11: 000000000001ffe0 R12: 0000000000000000
[ 4.486905] R13: ffffffff818072f8 R14: 0000000000000003 R15: ffffffffa0020f50
[ 4.487118] FS: 00007f75d64247c0(0000) GS:ffff88043fc00000(0000) knlGS:0000000000000000
[ 4.487502] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4.487710] CR2: 00007f75d642e000 CR3: 000000042c1d9000 CR4: 00000000000006f0
[ 4.487921] Stack:
[ 4.488123] ffff88042cfcd290 0000000000000286 0000000000000000 ffff88042c19fb10
[ 4.488608] ffffffff8144c2be ffffffff818072f8 0000000000000000 ffffffffa0020f50
[ 4.489090] ffff88042cfcd290 ffff88042c19fb40 ffffffff81314805 0000000000000003
[ 4.489573] Call Trace:
[ 4.489777] [<ffffffff8144c2be>] of_find_property+0x3a/0x58
[ 4.489988] [<ffffffff81314805>] of_gpiochip_add+0x92/0xdd
[ 4.490198] [<ffffffff81312e37>] gpiochip_add+0x22b/0x3f5
[ 4.490409] [<ffffffff81076a6c>] ? wake_up_q+0x56/0x56
[ 4.490621] [<ffffffffa00206ab>] ichx_gpio_probe+0x2cb/0x351 [gpio_ich]
[ 4.490834] [<ffffffff813c03c4>] platform_drv_probe+0x38/0x7d
[ 4.491044] [<ffffffff813be99d>] driver_probe_device+0xfc/0x26c
[ 4.491254] [<ffffffff813beb6a>] __driver_attach+0x5d/0x7f
[ 4.491464] [<ffffffff813beb0d>] ? driver_probe_device+0x26c/0x26c
[ 4.491674] [<ffffffff813bcf97>] bus_for_each_dev+0x6d/0x85
[ 4.491884] [<ffffffff813be544>] driver_attach+0x1e/0x20
[ 4.492094] [<ffffffff813be13f>] bus_add_driver+0xf1/0x1e9
[ 4.492303] [<ffffffffa0023000>] ? 0xffffffffa0023000
[ 4.492513] [<ffffffff813bf3f4>] driver_register+0x8e/0xca
[ 4.492721] [<ffffffffa0023000>] ? 0xffffffffa0023000
[ 4.492930] [<ffffffff813c031a>] __platform_driver_register+0x36/0x38
[ 4.493143] [<ffffffffa0023017>] ichx_gpio_driver_init+0x17/0x19 [gpio_ich]
[ 4.493355] [<ffffffff81002152>] do_one_initcall+0xed/0x17a
[ 4.493565] [<ffffffff81145a6e>] ? kfree+0xec/0x135
[ 4.493772] [<ffffffff81144861>] ? kmem_cache_alloc_trace+0x3d/0x16d
[ 4.493983] [<ffffffff8110175d>] ? do_init_module+0x27/0x1df
[ 4.494194] [<ffffffff81101795>] do_init_module+0x5f/0x1df
[ 4.494404] [<ffffffff810bb0f7>] load_module+0x185a/0x1c00
[ 4.494614] [<ffffffff81159de5>] ? vfs_read+0xf1/0xff
[ 4.494823] [<ffffffff810b86f7>] ? copy_module_from_fd+0x8e/0xef
[ 4.495035] [<ffffffff810bb5f2>] SyS_finit_module+0x5e/0x6b
[ 4.495244] [<ffffffff810bb5f2>] ? SyS_finit_module+0x5e/0x6b
[ 4.495457] [<ffffffff81538836>] entry_SYSCALL_64_fastpath+0x16/0x75
[ 4.495668] Code: 5c 41 5d 41 5e 5d c3 66 66 66 66 90 31 c0 48 85 ff 74 44 55 48 89 e5 41 55 49 89 f5 41 54 49 89 d4 53 48 8b 5f 30 48 85 db 74 23 <48> 8b 3b 4c 89 ee e8 c6 62 ea ff 85 c0 75 0e 4d 85 e4 74 0f 8b
[ 4.497905] RIP [<ffffffff8144c257>] __of_find_property+0x24/0x51
[ 4.498143] RSP <ffff88042c19fac8>
[ 4.498349] ---[ end trace dd833814130a8ac2 ]---
[ 4.504085] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 4.527577] systemd-udevd[424]: Process 'net.sh wlan0 start' failed with exit code 1.
[ 4.533475] systemd-udevd[432]: Process 'net.sh eth0 start' failed with exit code 1.
[ 4.554099] systemd-udevd[381]: worker [433] terminated by signal 11 (Segmentation fault)
[ 4.554492] systemd-udevd[381]: worker [433] failed while handling '/devices/pci0000:00/0000:00:1f.0/gpio_ich.1.auto'
[ 4.560860] firewire_core 0000:17:00.3: created device fw0: GUID f0def1ff3ebaafff, S400
[ 4.676723] usb 1-1.1: new low-speed USB device number 3 using ehci-pci
[ 4.765292] usb 1-1.1: New USB device found, idVendor=0765, idProduct=5001
[ 4.765509] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.769716] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 4.797719] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.804288] usbcore: registered new interface driver usbhid
[ 4.804502] usbhid: USB HID core driver
[ 4.810456] hid-generic 0003:0765:5001.0001: hiddev0,hidraw0: USB HID v1.00 Device [HID 0765:5001] on usb-0000:00:1a.0-1.1/input0
[ 4.841710] usb 1-1.3: new full-speed USB device number 4 using ehci-pci
[ 4.899804] usb 4-1: New USB device found, idVendor=8087, idProduct=0020
[ 4.900042] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.901069] hub 4-1:1.0: USB hub found
[ 4.901478] hub 4-1:1.0: 8 ports detected
[ 4.928180] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016
[ 4.928400] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.928818] usb 1-1.3: Product: Biometric Coprocessor
[ 4.929028] usb 1-1.3: Manufacturer: UPEK
[ 5.002714] usb 1-1.6: new high-speed USB device number 5 using ehci-pci
[ 5.008942] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820]
[ 5.091849] tun: Universal TUN/TAP device driver, 1.6
[ 5.092061] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[ 5.094196] usb 1-1.6: New USB device found, idVendor=17ef, idProduct=480f
[ 5.094415] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.094827] usb 1-1.6: Product: Integrated Camera
[ 5.095038] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[ 5.099475] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000/0x0, board id: 0, fw id: 578367
[ 5.099906] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 5.156709] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input3
[ 5.177692] usb 4-1.3: new high-speed USB device number 3 using ehci-pci
[ 5.195707] Linux video capture interface: v2.00
[ 5.223319] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:480f)
[ 5.228066] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input5
[ 5.229125] usbcore: registered new interface driver uvcvideo
[ 5.229338] USB Video Class driver (1.1.1)
[ 5.259241] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 5.262534] Bridge firewalling registered
[ 5.263718] usb 4-1.3: New USB device found, idVendor=8086, idProduct=0187
[ 5.263936] usb 4-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.264320] usb 4-1.3: Product: Intel(R) Centrino(R) Advanced-N + WiMAX 6250
[ 5.264532] usb 4-1.3: Manufacturer: Intel(R) Corporation
[ 5.340683] usb 4-1.4: new high-speed USB device number 4 using ehci-pci
[ 5.428840] usb 4-1.4: config 1 has an invalid interface number: 1 but max is 0
[ 5.429229] usb 4-1.4: config 1 has no interface number 0
[ 5.431611] usb 4-1.4: New USB device found, idVendor=05c6, idProduct=9204
[ 5.431849] usb 4-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[ 5.432235] usb 4-1.4: Product: Qualcomm Gobi 2000
[ 5.432443] usb 4-1.4: Manufacturer: Qualcomm Incorporated
[ 5.497947] usbcore: registered new interface driver usbserial
[ 5.498724] usb 4-1.8: new full-speed USB device number 5 using ehci-pci
[ 5.500941] usbcore: registered new interface driver usbserial_generic
[ 5.501843] usbserial: USB Serial support registered for generic
[ 5.509010] usbcore: registered new interface driver qcserial
[ 5.510044] usbserial: USB Serial support registered for Qualcomm USB modem
[ 5.511031] qcserial 4-1.4:1.1: Qualcomm USB modem converter detected
[ 5.511523] usb 4-1.4: Qualcomm USB modem converter now attached to ttyUSB0
[ 5.586103] usb 4-1.8: New USB device found, idVendor=056a, idProduct=00e2
[ 5.586387] usb 4-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.586864] usb 4-1.8: Product: ISD-V4
[ 5.587073] usb 4-1.8: Manufacturer: Tablet
[ 5.645372] BTRFS info (device sdb3): turning on discard
[ 5.645677] BTRFS info (device sdb3): disk space caching is enabled
[ 5.785120] input: Wacom ISDv4 E2 Finger as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.8/4-1.8:1.0/0003:056A:00E2.0002/input/input7
[ 5.787199] wacom 0003:056A:00E2.0002: hidraw1: USB HID v1.11 Mouse [Tablet ISD-V4] on usb-0000:00:1d.0-1.8/input0
[ 6.177108] EXT4-fs (sda3): mounted filesystem with writeback data mode. Opts: data=writeback,user_xattr
[ 6.300631] EXT4-fs (sda4): mounted filesystem with writeback data mode. Opts: (null)
[ 6.316854] EXT4-fs (zram0): mounted filesystem without journal. Opts: barrier=0,commit=240
[ 6.319597] EXT4-fs (zram1): mounted filesystem without journal. Opts: barrier=0,commit=240
[ 6.989531] snd_hda_intel 0000:01:00.1: azx_get_response timeout, switching to polling mode: last cmd=0x300f0000
[ 7.282952] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input9
[ 7.283464] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input10
[ 7.284014] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input11
[ 7.284536] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input12
[ 8.781321] usb 4-1.4: USB disconnect, device number 4
[ 8.781710] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0
[ 8.782115] qcserial 4-1.4:1.1: device disconnected
[ 9.726303] usb 4-1.4: new high-speed USB device number 6 using ehci-pci
[ 9.813892] usb 4-1.4: New USB device found, idVendor=05c6, idProduct=9205
[ 9.814109] usb 4-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[ 9.814507] usb 4-1.4: Product: Qualcomm Gobi 2000
[ 9.814717] usb 4-1.4: Manufacturer: Qualcomm Incorporated
[ 9.817947] qcserial 4-1.4:1.1: Qualcomm USB modem converter detected
[ 9.818259] usb 4-1.4: Qualcomm USB modem converter now attached to ttyUSB0
[ 9.819231] qcserial 4-1.4:1.2: Qualcomm USB modem converter detected
[ 9.819568] usb 4-1.4: Qualcomm USB modem converter now attached to ttyUSB1
[ 9.820345] qcserial 4-1.4:1.3: Qualcomm USB modem converter detected
[ 9.820652] usb 4-1.4: Qualcomm USB modem converter now attached to ttyUSB2
[ 10.553641] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 10.841876] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input4
[ 14.433577] systemd-udevd[426]: Process '/usr/local/sbin/doBackup.sh' failed with exit code 127.
[ 16.878894] Adding 16347080k swap on /media/swapfile. Priority:-1 extents:212 across:196689920k FS
[ 18.048248] Bluetooth: Core ver 2.20
[ 18.048479] NET: Registered protocol family 31
[ 18.048714] Bluetooth: HCI device and connection manager initialized
[ 18.051672] Bluetooth: HCI socket layer initialized
[ 18.051887] Bluetooth: L2CAP socket layer initialized
[ 18.052102] Bluetooth: SCO socket layer initialized
[ 18.060746] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.060959] Bluetooth: BNEP filters: protocol multicast
[ 18.061170] Bluetooth: BNEP socket layer initialized
[ 18.403762] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.584680] device eth0 entered promiscuous mode
[ 19.597774] device dummy0 entered promiscuous mode
[ 19.606123] device xenbr0 entered promiscuous mode
[ 19.609172] xenbr0: port 2(dummy0) entered forwarding state
[ 19.609398] xenbr0: port 2(dummy0) entered forwarding state
[ 19.643803] systemd-udevd[424]: Process 'net.sh xenbr0 start' failed with exit code 1.
[ 21.985454] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 21.986081] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 21.987308] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 22.222432] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 22.223086] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 22.223701] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 22.322039] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 24.968474] wlan0: authenticate with 04:a1:51:b8:7b:e5
[ 24.972227] wlan0: send auth to 04:a1:51:b8:7b:e5 (try 1/3)
[ 25.038717] wlan0: authenticated
[ 25.040044] wlan0: associate with 04:a1:51:b8:7b:e5 (try 1/3)
[ 25.042252] wlan0: RX AssocResp from 04:a1:51:b8:7b:e5 (capab=0x11 status=0 aid=1)
[ 25.046885] wlan0: associated
[ 25.047137] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 25.051153] cfg80211: Regulatory domain changed to country: US
[ 25.051368] cfg80211: DFS Master region: FCC
[ 25.051403] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 25.051986] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[ 25.052407] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
[ 25.052797] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[ 25.053199] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2300 mBm), (0 s)
[ 25.053586] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 25.053970] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 34.633233] xenbr0: port 2(dummy0) entered forwarding state
[ 63.480035] ata2.00: configured for UDMA/133
[ 63.480249] ata2: EH complete
[ 65.181739] systemd-udevd[381]: seq 1169 '/devices/pci0000:00/0000:00:1f.0/iTCO_wdt.0.auto' is taking a long time