Re: [PATCH v2] ARM: dts: sunxi: Add regulators for LeMaker BananaPi

From: Maxime Ripard
Date: Wed Oct 07 2015 - 13:49:11 EST


Hi Timo,

On Wed, Oct 07, 2015 at 05:49:18PM +0200, Timo Sigurdsson wrote:
> Hi Kevin,
> Hi Maxime,
>
> Kevin Hilman schrieb am 07.10.2015 16:36:
>
> > "Timo Sigurdsson" <public_timo.s@xxxxxxxxxxxxxx> writes:
> >> I still think that the lower voltages may be the cause of your problem
> >> with that specific board, so could you please test the attached patch on
> >> top of my patch that you first experienced the problem with? Please let
> >> us know whether this solves your issue or whether we need to dig deeper.
> >
> > Thanks for the patch. Looks like it's the OPPs.
> >
> > I went back to next-20150923 and verified it still fails. Then, I
> > applied your patch and saw that it boots just fine.
>
> Good. Then we can easily fix this, I guess.
>
> @Maxime: How should we handle this? In its current form, the patch applies
> only to the BananaPi dts by overriding the inherited opp from the SoC dtsi.
> In an earlier discussion, it was said that this can be done, even though it
> might not be the most elegant approach. But then again, I think it
> shouldn't be necessary to change the opp in the sun7i-a20.dtsi for all A20
> boards since this is - to my knowledge - the first and only report that an
> A20 board has stability issues at the lower voltages (although not too many
> boards use voltage scaling yet).

If you count only the number of boards, indeed, but if you count the
number of devices actually used in the field, we cover already a
significant portion of them.

> So, would you prefer to keep this as a patch for BananaPi only, or
> change the dtsi for all A20 devices instead?

Yeah, we probably can keep that for bananapi only at the moment, and
try to generalize that afterwards.

> In case we keep it as it is, what is the correct commit to point to as
> "Fixes commit ..."? I'd say it fixes the initial opp commit for A20, since
> that's where these voltages were defined. But then again, if we don't
> change the dtsi, should I point to my regulator patch instead?

I don't think it fixes anything at this point. We droped your commit
that was using the A20 OPPs, so in the history so far we don't have
anything to fix, just enable cpufreq again.

Maxime

--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

Attachment: signature.asc
Description: Digital signature