Re: [PATCH 4/5] dt-bindings: add binding for marvell berlin4ct SoC

From: Stephen Boyd
Date: Thu Oct 01 2015 - 18:50:34 EST


On 09/22, Jisheng Zhang wrote:
> +This binding uses the common clock binding[1].
> +
> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> +
> +The berlin4ct clock subsystem generates and supplies clock to various
> +controllers within the berlin4ct SoC. The berlin4ct contains 3 clock controller
> +blocks: pll, gateclk, berlin-clk.
> +
> +Required Properties:
> +
> +- compatible: should be one of the following.
> + - "marvell,berlin-pll" - pll compatible
> + - "marvell,berlin4ct-clk" - berlin clk compatible
> + - "marvell,berlin4ct-gateclk" - gateclk compatible
> +- reg: physical base address of the clock controller and length of memory mapped
> + region. For pll, the second reg defines the bypass register base address and
> + length of memory mapped region.
> +- #clock-cells: for pll should 0, for gateclk and berlin clk should be 1.
> +- #bypass-shift: the bypass bit in bypass register.
> +
> +Example:
> +
> +syspll: syspll {
> + compatible = "marvell,berlin-pll";
> + reg = <0xea0200 0x14>, <0xea0710 4>;
> + #clock-cells = <0>;
> + clocks = <&osc>;
> + bypass-shift = /bits/ 8 <0>;
> +};
> +
> +clk: clk {
> + compatible = "marvell,berlin4ct-clk";
> + reg = <0xea0720 0x144>;
> + #clock-cells = <1>;
> + clocks = <&syspll>;
> +};

Is there one clock controller at 0xea0000 of size 0x1000? We've
been trying to push people towards using the device model and
writing drivers with probe instead of using CLK_OF_DECLARE() for
their platform clocks. From the looks of this binding, we're
splitting up the different types of clocks into their own nodes
and then registering them with CLK_OF_DECLARE.

--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/