Re: [PATCH 2/2] uio: new driver to support PCI MSI-X

From: Michael S. Tsirkin
Date: Thu Oct 01 2015 - 12:06:46 EST


On Thu, Oct 01, 2015 at 01:37:12PM +0300, Michael S. Tsirkin wrote:
> On Thu, Oct 01, 2015 at 11:33:06AM +0300, Michael S. Tsirkin wrote:
> > On Wed, Sep 30, 2015 at 03:28:58PM -0700, Stephen Hemminger wrote:
> > > This driver allows using PCI device with Message Signalled Interrupt
> > > from userspace. The API is similar to the igb_uio driver used by the DPDK.
> > > Via ioctl it provides a mechanism to map MSI-X interrupts into event
> > > file descriptors similar to VFIO.
> > >
> > > VFIO is a better choice if IOMMU is available, but often userspace drivers
> > > have to work in environments where IOMMU support (real or emulated) is
> > > not available. All UIO drivers that support DMA are not secure against
> > > rogue userspace applications programming DMA hardware to access
> > > private memory; this driver is no less secure than existing code.
> > >
> > > Signed-off-by: Stephen Hemminger <stephen@xxxxxxxxxxxxxxxxxx>
> >
> > I don't think copying the igb_uio interface is a good idea.
> > What DPDK is doing with igb_uio (and indeed uio_pci_generic)
> > is abusing the sysfs BAR access to provide unlimited
> > access to hardware.
> >
> > MSI messages are memory writes so any generic device capable
> > of MSI is capable of corrupting kernel memory.
> > This means that a bug in userspace will lead to kernel memory corruption
> > and crashes. This is something distributions can't support.
> >
> > uio_pci_generic is already abused like that, mostly
> > because when I wrote it, I didn't add enough protections
> > against using it with DMA capable devices,
> > and we can't go back and break working userspace.
> > But at least it does not bind to VFs which all of
> > them are capable of DMA.
> >
> > The result of merging this driver will be userspace abusing the
> > sysfs BAR access with VFs as well, and we do not want that.
> >
> >
> > Just forwarding events is not enough to make a valid driver.
> > What is missing is a way to access the device in a safe way.
> >
> > On a more positive note:
> >
> > What would be a reasonable interface? One that does the following
> > in kernel:
> >
> > 1. initializes device rings (can be in pinned userspace memory,
> > but can not be writeable by userspace), brings up interface link
> > 2. pins userspace memory (unless using e.g. hugetlbfs)
> > 3. gets request, make sure it's valid and belongs to
> > the correct task, put it in the ring
> > 4. in the reverse direction, notify userspace when buffers
> > are available in the ring
> > 5. notify userspace about MSI (what this driver does)
> >
> > What userspace can be allowed to do:
> >
> > format requests (e.g. transmit, receive) in userspace
> > read ring contents
> >
> > What userspace can't be allowed to do:
> >
> > access BAR
> > write rings
>
> Thinking about it some more, many devices
>
>
> Have separate rings for DMA: TX (device reads memory)
> and RX (device writes memory).
> With such devices, a mode where userspace can write TX ring
> but not RX ring might make sense.
>
> This will mean userspace might read kernel memory
> through the device, but can not corrupt it.
>
> That's already a big win!
>
> And RX buffers do not have to be added one at a time.
> If we assume 0.2usec per system call, batching some 100 buffers per
> system call gives you 2 nano seconds overhead. That seems quite
> reasonable.
>

To add to that, there's no reason to do this on the same core.
Re-arming descriptors can happen in parallel with packet
processing, so this overhead won't affect PPS or latency at all:
only the CPU utilization.


>
>
>
> >
> > This means that the driver can not be a generic one,
> > and there will be a system call overhead when you
> > write the ring, but that's the price you have to
> > pay for ability to run on systems without an IOMMU.
> >
> >
> >
> >
> > > ---
> > > drivers/uio/Kconfig | 9 ++
> > > drivers/uio/Makefile | 1 +
> > > drivers/uio/uio_msi.c | 378 +++++++++++++++++++++++++++++++++++++++++++
> > > include/uapi/linux/Kbuild | 1 +
> > > include/uapi/linux/uio_msi.h | 22 +++
> > > 5 files changed, 411 insertions(+)
> > > create mode 100644 drivers/uio/uio_msi.c
> > > create mode 100644 include/uapi/linux/uio_msi.h
> > >
> > > diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig
> > > index 52c98ce..04adfa0 100644
> > > --- a/drivers/uio/Kconfig
> > > +++ b/drivers/uio/Kconfig
> > > @@ -93,6 +93,15 @@ config UIO_PCI_GENERIC
> > > primarily, for virtualization scenarios.
> > > If you compile this as a module, it will be called uio_pci_generic.
> > >
> > > +config UIO_PCI_MSI
> > > + tristate "Generic driver supporting MSI-x on PCI Express cards"
> > > + depends on PCI
> > > + help
> > > + Generic driver that provides Message Signalled IRQ events
> > > + similar to VFIO. If IOMMMU is available please use VFIO
> > > + instead since it provides more security.
> > > + If you compile this as a module, it will be called uio_msi.
> > > +
> > > config UIO_NETX
> > > tristate "Hilscher NetX Card driver"
> > > depends on PCI
> > > diff --git a/drivers/uio/Makefile b/drivers/uio/Makefile
> > > index 8560dad..62fc44b 100644
> > > --- a/drivers/uio/Makefile
> > > +++ b/drivers/uio/Makefile
> > > @@ -9,3 +9,4 @@ obj-$(CONFIG_UIO_NETX) += uio_netx.o
> > > obj-$(CONFIG_UIO_PRUSS) += uio_pruss.o
> > > obj-$(CONFIG_UIO_MF624) += uio_mf624.o
> > > obj-$(CONFIG_UIO_FSL_ELBC_GPCM) += uio_fsl_elbc_gpcm.o
> > > +obj-$(CONFIG_UIO_PCI_MSI) += uio_msi.o
> > > diff --git a/drivers/uio/uio_msi.c b/drivers/uio/uio_msi.c
> > > new file mode 100644
> > > index 0000000..802b5c4
> > > --- /dev/null
> > > +++ b/drivers/uio/uio_msi.c
> > > @@ -0,0 +1,378 @@
> > > +/*-
> > > + *
> > > + * Copyright (c) 2015 by Brocade Communications Systems, Inc.
> > > + * Author: Stephen Hemminger <stephen@xxxxxxxxxxxxxxxxxx>
> > > + *
> > > + * This work is licensed under the terms of the GNU GPL, version 2 only.
> > > + */
> > > +
> > > +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> > > +
> > > +#include <linux/device.h>
> > > +#include <linux/interrupt.h>
> > > +#include <linux/eventfd.h>
> > > +#include <linux/module.h>
> > > +#include <linux/pci.h>
> > > +#include <linux/uio_driver.h>
> > > +#include <linux/msi.h>
> > > +#include <linux/uio_msi.h>
> > > +
> > > +#define DRIVER_VERSION "0.1.1"
> > > +#define MAX_MSIX_VECTORS 64
> > > +
> > > +/* MSI-X vector information */
> > > +struct uio_msi_pci_dev {
> > > + struct uio_info info; /* UIO driver info */
> > > + struct pci_dev *pdev; /* PCI device */
> > > + struct mutex mutex; /* open/release/ioctl mutex */
> > > + int ref_cnt; /* references to device */
> > > + unsigned int max_vectors; /* MSI-X slots available */
> > > + struct msix_entry *msix; /* MSI-X vector table */
> > > + struct uio_msi_irq_ctx {
> > > + struct eventfd_ctx *trigger; /* vector to eventfd */
> > > + char *name; /* name in /proc/interrupts */
> > > + } *ctx;
> > > +};
> > > +
> > > +static irqreturn_t uio_intx_irqhandler(int irq, void *arg)
> > > +{
> > > + struct uio_msi_pci_dev *udev = arg;
> > > +
> > > + if (pci_check_and_mask_intx(udev->pdev)) {
> > > + eventfd_signal(udev->ctx->trigger, 1);
> > > + return IRQ_HANDLED;
> > > + }
> > > +
> > > + return IRQ_NONE;
> > > +}
> > > +
> > > +static irqreturn_t uio_msi_irqhandler(int irq, void *arg)
> > > +{
> > > + struct eventfd_ctx *trigger = arg;
> > > +
> > > + eventfd_signal(trigger, 1);
> > > + return IRQ_HANDLED;
> > > +}
> > > +
> > > +/* set the mapping between vector # and existing eventfd. */
> > > +static int set_irq_eventfd(struct uio_msi_pci_dev *udev, u32 vec, int fd)
> > > +{
> > > + struct eventfd_ctx *trigger;
> > > + int irq, err;
> > > +
> > > + if (vec >= udev->max_vectors) {
> > > + dev_notice(&udev->pdev->dev, "vec %u >= num_vec %u\n",
> > > + vec, udev->max_vectors);
> > > + return -ERANGE;
> > > + }
> > > +
> > > + irq = udev->msix[vec].vector;
> > > + trigger = udev->ctx[vec].trigger;
> > > + if (trigger) {
> > > + /* Clearup existing irq mapping */
> > > + free_irq(irq, trigger);
> > > + eventfd_ctx_put(trigger);
> > > + udev->ctx[vec].trigger = NULL;
> > > + }
> > > +
> > > + /* Passing -1 is used to disable interrupt */
> > > + if (fd < 0)
> > > + return 0;
> > > +
> > > + trigger = eventfd_ctx_fdget(fd);
> > > + if (IS_ERR(trigger)) {
> > > + err = PTR_ERR(trigger);
> > > + dev_notice(&udev->pdev->dev,
> > > + "eventfd ctx get failed: %d\n", err);
> > > + return err;
> > > + }
> > > +
> > > + if (udev->msix)
> > > + err = request_irq(irq, uio_msi_irqhandler, 0,
> > > + udev->ctx[vec].name, trigger);
> > > + else
> > > + err = request_irq(irq, uio_intx_irqhandler, IRQF_SHARED,
> > > + udev->ctx[vec].name, udev);
> > > +
> > > + if (err) {
> > > + dev_notice(&udev->pdev->dev,
> > > + "request irq failed: %d\n", err);
> > > + eventfd_ctx_put(trigger);
> > > + return err;
> > > + }
> > > +
> > > + udev->ctx[vec].trigger = trigger;
> > > + return 0;
> > > +}
> > > +
> > > +static int
> > > +uio_msi_ioctl(struct uio_info *info, unsigned int cmd, unsigned long arg)
> > > +{
> > > + struct uio_msi_pci_dev *udev
> > > + = container_of(info, struct uio_msi_pci_dev, info);
> > > + struct uio_msi_irq_set hdr;
> > > + int err;
> > > +
> > > + switch (cmd) {
> > > + case UIO_MSI_IRQ_SET:
> > > + if (copy_from_user(&hdr, (void __user *)arg, sizeof(hdr)))
> > > + return -EFAULT;
> > > +
> > > + mutex_lock(&udev->mutex);
> > > + err = set_irq_eventfd(udev, hdr.vec, hdr.fd);
> > > + mutex_unlock(&udev->mutex);
> > > + break;
> > > + default:
> > > + err = -EOPNOTSUPP;
> > > + }
> > > + return err;
> > > +}
> > > +
> > > +/* Opening the UIO device for first time enables MSI-X */
> > > +static int
> > > +uio_msi_open(struct uio_info *info, struct inode *inode)
> > > +{
> > > + struct uio_msi_pci_dev *udev
> > > + = container_of(info, struct uio_msi_pci_dev, info);
> > > + int err = 0;
> > > +
> > > + mutex_lock(&udev->mutex);
> > > + if (udev->ref_cnt++ == 0) {
> > > + if (udev->msix)
> > > + err = pci_enable_msix(udev->pdev, udev->msix,
> > > + udev->max_vectors);
> > > + }
> > > + mutex_unlock(&udev->mutex);
> > > +
> > > + return err;
> > > +}
> > > +
> > > +/* Last close of the UIO device releases/disables all IRQ's */
> > > +static int
> > > +uio_msi_release(struct uio_info *info, struct inode *inode)
> > > +{
> > > + struct uio_msi_pci_dev *udev
> > > + = container_of(info, struct uio_msi_pci_dev, info);
> > > + int i;
> > > +
> > > + mutex_lock(&udev->mutex);
> > > + if (--udev->ref_cnt == 0) {
> > > + for (i = 0; i < udev->max_vectors; i++) {
> > > + int irq = udev->msix[i].vector;
> > > + struct eventfd_ctx *trigger = udev->ctx[i].trigger;
> > > +
> > > + if (!trigger)
> > > + continue;
> > > +
> > > + free_irq(irq, trigger);
> > > + eventfd_ctx_put(trigger);
> > > + udev->ctx[i].trigger = NULL;
> > > + }
> > > +
> > > + if (udev->msix)
> > > + pci_disable_msix(udev->pdev);
> > > + }
> > > + mutex_unlock(&udev->mutex);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +/* Unmap previously ioremap'd resources */
> > > +static void
> > > +release_iomaps(struct uio_mem *mem)
> > > +{
> > > + int i;
> > > +
> > > + for (i = 0; i < MAX_UIO_MAPS; i++, mem++) {
> > > + if (mem->internal_addr)
> > > + iounmap(mem->internal_addr);
> > > + }
> > > +}
> > > +
> > > +static int
> > > +setup_maps(struct pci_dev *pdev, struct uio_info *info)
> > > +{
> > > + int i, m = 0, p = 0, err;
> > > + static const char * const bar_names[] = {
> > > + "BAR0", "BAR1", "BAR2", "BAR3", "BAR4", "BAR5",
> > > + };
> > > +
> > > + for (i = 0; i < ARRAY_SIZE(bar_names); i++) {
> > > + unsigned long start = pci_resource_start(pdev, i);
> > > + unsigned long flags = pci_resource_flags(pdev, i);
> > > + unsigned long len = pci_resource_len(pdev, i);
> > > +
> > > + if (start == 0 || len == 0)
> > > + continue;
> > > +
> > > + if (flags & IORESOURCE_MEM) {
> > > + void __iomem *addr;
> > > +
> > > + if (m >= MAX_UIO_MAPS)
> > > + continue;
> > > +
> > > + addr = ioremap(start, len);
> > > + if (addr == NULL) {
> > > + err = -EINVAL;
> > > + goto fail;
> > > + }
> > > +
> > > + info->mem[m].name = bar_names[i];
> > > + info->mem[m].addr = start;
> > > + info->mem[m].internal_addr = addr;
> > > + info->mem[m].size = len;
> > > + info->mem[m].memtype = UIO_MEM_PHYS;
> > > + ++m;
> > > + } else if (flags & IORESOURCE_IO) {
> > > + if (p >= MAX_UIO_PORT_REGIONS)
> > > + continue;
> > > +
> > > + info->port[p].name = bar_names[i];
> > > + info->port[p].start = start;
> > > + info->port[p].size = len;
> > > + info->port[p].porttype = UIO_PORT_X86;
> > > + ++p;
> > > + }
> > > + }
> > > +
> > > + return 0;
> > > + fail:
> > > + for (i = 0; i < m; i++)
> > > + iounmap(info->mem[i].internal_addr);
> > > + return err;
> > > +}
> > > +
> > > +static int uio_msi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> > > +{
> > > + struct uio_msi_pci_dev *udev;
> > > + int i, err, vectors;
> > > +
> > > + udev = kzalloc(sizeof(struct uio_msi_pci_dev), GFP_KERNEL);
> > > + if (!udev)
> > > + return -ENOMEM;
> > > +
> > > + err = pci_enable_device(pdev);
> > > + if (err != 0) {
> > > + dev_err(&pdev->dev, "cannot enable PCI device\n");
> > > + goto fail_free;
> > > + }
> > > +
> > > + err = pci_request_regions(pdev, "uio_msi");
> > > + if (err != 0) {
> > > + dev_err(&pdev->dev, "Cannot request regions\n");
> > > + goto fail_disable;
> > > + }
> > > +
> > > + pci_set_master(pdev);
> > > +
> > > + /* remap resources */
> > > + err = setup_maps(pdev, &udev->info);
> > > + if (err)
> > > + goto fail_release_iomem;
> > > +
> > > + /* fill uio infos */
> > > + udev->info.name = "uio_msi";
> > > + udev->info.version = DRIVER_VERSION;
> > > + udev->info.priv = udev;
> > > + udev->pdev = pdev;
> > > + udev->info.ioctl = uio_msi_ioctl;
> > > + udev->info.open = uio_msi_open;
> > > + udev->info.release = uio_msi_release;
> > > + udev->info.irq = UIO_IRQ_CUSTOM;
> > > + mutex_init(&udev->mutex);
> > > +
> > > + vectors = pci_msix_vec_count(pdev);
> > > + if (vectors > 0) {
> > > + udev->max_vectors = min_t(u16, vectors, MAX_MSIX_VECTORS);
> > > + dev_info(&pdev->dev, "using up to %u MSI-X vectors\n",
> > > + udev->max_vectors);
> > > +
> > > + err = -ENOMEM;
> > > + udev->msix = kcalloc(udev->max_vectors,
> > > + sizeof(struct msix_entry), GFP_KERNEL);
> > > + if (!udev->msix)
> > > + goto fail_release_iomem;
> > > + } else if (!pci_intx_mask_supported(pdev)) {
> > > + dev_err(&pdev->dev,
> > > + "device does not support MSI-X or INTX\n");
> > > + err = -EINVAL;
> > > + goto fail_release_iomem;
> > > + } else {
> > > + dev_notice(&pdev->dev, "using INTX\n");
> > > + udev->info.irq_flags = IRQF_SHARED;
> > > + udev->max_vectors = 1;
> > > + }
> > > +
> > > + udev->ctx = kcalloc(udev->max_vectors,
> > > + sizeof(struct uio_msi_irq_ctx), GFP_KERNEL);
> > > + if (!udev->ctx)
> > > + goto fail_free_msix;
> > > +
> > > + for (i = 0; i < udev->max_vectors; i++) {
> > > + udev->msix[i].entry = i;
> > > +
> > > + udev->ctx[i].name = kasprintf(GFP_KERNEL,
> > > + KBUILD_MODNAME "[%d](%s)",
> > > + i, pci_name(pdev));
> > > + if (!udev->ctx[i].name)
> > > + goto fail_free_ctx;
> > > + }
> > > +
> > > + /* register uio driver */
> > > + err = uio_register_device(&pdev->dev, &udev->info);
> > > + if (err != 0)
> > > + goto fail_free_ctx;
> > > +
> > > + pci_set_drvdata(pdev, udev);
> > > + return 0;
> > > +
> > > +fail_free_ctx:
> > > + for (i = 0; i < udev->max_vectors; i++)
> > > + kfree(udev->ctx[i].name);
> > > + kfree(udev->ctx);
> > > +fail_free_msix:
> > > + kfree(udev->msix);
> > > +fail_release_iomem:
> > > + release_iomaps(udev->info.mem);
> > > + pci_release_regions(pdev);
> > > +fail_disable:
> > > + pci_disable_device(pdev);
> > > +fail_free:
> > > + kfree(udev);
> > > +
> > > + pr_notice("%s ret %d\n", __func__, err);
> > > + return err;
> > > +}
> > > +
> > > +static void uio_msi_remove(struct pci_dev *pdev)
> > > +{
> > > + struct uio_info *info = pci_get_drvdata(pdev);
> > > + struct uio_msi_pci_dev *udev
> > > + = container_of(info, struct uio_msi_pci_dev, info);
> > > + int i;
> > > +
> > > + uio_unregister_device(info);
> > > + release_iomaps(info->mem);
> > > +
> > > + pci_release_regions(pdev);
> > > + for (i = 0; i < udev->max_vectors; i++)
> > > + kfree(udev->ctx[i].name);
> > > + kfree(udev->ctx);
> > > + kfree(udev->msix);
> > > + pci_disable_device(pdev);
> > > +
> > > + pci_set_drvdata(pdev, NULL);
> > > + kfree(udev);
> > > +}
> > > +
> > > +static struct pci_driver uio_msi_pci_driver = {
> > > + .name = "uio_msi",
> > > + .probe = uio_msi_probe,
> > > + .remove = uio_msi_remove,
> > > +};
> > > +
> > > +module_pci_driver(uio_msi_pci_driver);
> > > +MODULE_VERSION(DRIVER_VERSION);
> > > +MODULE_LICENSE("GPL v2");
> > > +MODULE_AUTHOR("Stephen Hemminger <stephen@xxxxxxxxxxxxxxxxxx>");
> > > +MODULE_DESCRIPTION("UIO driver for MSI PCI devices");
> > > diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild
> > > index f7b2db4..d9497691 100644
> > > --- a/include/uapi/linux/Kbuild
> > > +++ b/include/uapi/linux/Kbuild
> > > @@ -411,6 +411,7 @@ header-y += udp.h
> > > header-y += uhid.h
> > > header-y += uinput.h
> > > header-y += uio.h
> > > +header-y += uio_msi.h
> > > header-y += ultrasound.h
> > > header-y += un.h
> > > header-y += unistd.h
> > > diff --git a/include/uapi/linux/uio_msi.h b/include/uapi/linux/uio_msi.h
> > > new file mode 100644
> > > index 0000000..297de00
> > > --- /dev/null
> > > +++ b/include/uapi/linux/uio_msi.h
> > > @@ -0,0 +1,22 @@
> > > +/*
> > > + * UIO_MSI API definition
> > > + *
> > > + * Copyright (c) 2015 by Brocade Communications Systems, Inc.
> > > + * All rights reserved.
> > > + *
> > > + * This program is free software; you can redistribute it and/or modify
> > > + * it under the terms of the GNU General Public License version 2 as
> > > + * published by the Free Software Foundation.
> > > + */
> > > +#ifndef _UIO_PCI_MSI_H
> > > +#define _UIO_PCI_MSI_H
> > > +
> > > +struct uio_msi_irq_set {
> > > + u32 vec;
> > > + int fd;
> > > +};
> > > +
> > > +#define UIO_MSI_BASE 0x86
> > > +#define UIO_MSI_IRQ_SET _IOW('I', UIO_MSI_BASE+1, struct uio_msi_irq_set)
> > > +
> > > +#endif
> > > --
> > > 2.1.4
> > >
> > > --
> > > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > > Please read the FAQ at http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/