[PATCH v2 0/2] Add support to make output voltage determined by VSET2[] bits

From: Wenyou Yang
Date: Wed Sep 30 2015 - 03:30:08 EST


The patch is to add support to make the output voltage of ACT8865
DC/DC regulator determined by VSET2[] bits. The DT property
"active-semi,vsel-high" is used to specify the VSEL pin at high
on the board. When the VSEL pin is high, output voltage is programmed
by VSET2[] bits.

Changes in v2:
- fix missed argument of macro "ACT88xx_REG" for act8865_alt_regulators
structure variable.
- set variable "voltage_select" initial value to avoid compile warning.

Wenyou Yang (2):
regulator: act8865: support output voltage by VSET2[] bits
regulator: act8865: add DT binding for property
"active-semi,vsel-high"

.../bindings/regulator/act8865-regulator.txt | 3 +++
drivers/regulator/act8865-regulator.c | 24 ++++++++++++++++++--
2 files changed, 25 insertions(+), 2 deletions(-)

--
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/