Re: [PATCH 3/5] UBI: switch the UBI device in read-only mode when mtd returns -EROFS

[Boris Brezillon]

Hi Richard,

On Fri, 25 Sep 2015 19:34:42 +0200
Richard Weinberger <richard@xxxxxx> wrote:

> Am 25.09.2015 um 17:09 schrieb Boris Brezillon:
> > The NAND layer is now able to forward power-cut emulation errors from
> > a NAND driver to the MTD user.
> > Check for this kind of errors in UBI and switch the UBI device in read-only
> > mode if such an error occurs.
> > The error will also be forwarded to the UBI user requesting the operation
> > if any, thus allowing UBIFS to act accordingly.
> > 
> > Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
> > ---
> >  drivers/mtd/ubi/io.c | 4 +++-
> >  1 file changed, 3 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
> > index 5bbd1f0..c5ebef7 100644
> > --- a/drivers/mtd/ubi/io.c
> > +++ b/drivers/mtd/ubi/io.c
> > @@ -303,6 +303,8 @@ int ubi_io_write(struct ubi_device *ubi, const void *buf, int pnum, int offset,
> >  		len = ubi->peb_size - offset;
> >  		if (len)
> >  			err = ubi_self_check_all_ff(ubi, pnum, offset, len);
> > +	} else if (err == -EROFS) {
> > +		ubi_ro_mode(ubi);
> >  	}
> >  
> >  	return err;
> > @@ -355,7 +357,7 @@ retry:
> >  
> >  	err = mtd_erase(ubi->mtd, &ei);
> >  	if (err) {
> > -		if (retries++ < UBI_IO_RETRIES) {
> > +		if (err != -EROFS && retries++ < UBI_IO_RETRIES) {
> 
> Looks good! :)
> One small nit, can you please add a comment above both lines that the EROFS checks are
> here because of emulators.

Sure, I'll add a comment.

Thanks,

Boris

-- 
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/